IRF HFA08PB120

Bulletin PD -2.365 rev. B 11/00
HFA08PB120
HEXFRED
Ultrafast, Soft Recovery Diode
TM
•
•
•
•
•
VR = 1200V
BASE
CATHODE
Features
VF (typ.)* = 2.4V
Ultrafast Recovery
Ultrasoft Recovery
Very Low IRRM
Very Low Qrr
Specified at Operating Conditions
4
2
1
CATHODE
Benefits
IF (AV) = 8.0A
Qrr (typ.)= 140nC
IRRM (typ.) = 4.5A
trr (typ.) = 28ns
3
di(rec) M /dt (typ.)*= 85A /µs
ANODE
2
• Reduced RFI and EMI
• Reduced Power Loss in Diode and Switching
Transistor
• Higher Frequency Operation
• Reduced Snubbing
• Reduced Parts Count
TO-247AC (Modified)
Description
International Rectifier's HFA08PB120 is a state of the art ultra fast recovery diode.
Employing the latest in epitaxial construction and advanced processing techniques it
features a superb combination of characteristics which result in performance which is
unsurpassed by any rectifier previously available. With basic ratings of 1200 volts and 8
amps continuous current, the HFA08PB120 is especially well suited for use as the
companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the
HEXFRED product line features extremely low values of peak recovery current (IRRM) and
does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED
features combine to offer designers a rectifier with lower noise and significantly lower
switching losses in both the diode and the switching transistor. These HEXFRED
advantages can help to significantly reduce snubbing, component count and heatsink
sizes. The HEXFRED HFA08PB120 is ideally suited for applications in power supplies and
power conversion systems (such as inverters), motor drives, and many other similar
applications where high speed, high efficiency is needed.
Absolute Maximum Ratings
Parameter
VR
IF @ TC = 100°C
IFSM
IFRM
PD @ TC = 25°C
PD @ TC = 100°C
TJ
TSTG
Cathode-to-Anode Voltage
Continuous Forward Current
Single Pulse Forward Current
Maximum Repetitive Forward Current
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Max
Units
1200
8.0
130
32
73.5
29
- 55 to 150
V
A
W
°C
* 125°C
1
HFA08PB120
Bulletin PD-2.365 rev. B 11/00
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
VBR
Parameter
Min Typ Max Units
Test Conditions
Cathode Anode Breakdown
1200
-
-
V
IR = 100µA
-
2.6
3.3
V
IF = 8.0A
Voltage
VFM
Max. Forward Voltage
-
3.4
4.3
IF = 16A
-
2.4
3.1
IF = 8.0A, TJ = 125°C
Max. Reverse Leakage
-
0.31
10
Current
-
135
1000
CT
Junction Capacitance
-
11
20
pF
VR = 200V
LS
Series Inductance
-
8.0
-
nH
Measured lead to lead 5mm from pkg body
IRM
µA
See Fig. 1
VR = VR Rated
See Fig. 2
TJ = 125°C, VR = 0.8 x VR RatedD R
See Fig. 3
Rated
Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
trr
Min Typ Max Units
-
28
-
-
63
95
TJ = 25°C
IF = 8.0A
-
106
160
TJ = 125°C
VR = 200V
-
4.5
8.0
TJ = 25°C
di f /dt = 200A/µs
-
6.2
11
-
140
380
-
335
880
di(rec)M /dt1 Peak Rate of Recovery
-
133
-
di(rec)M /dt2 Current During tb
-
85
-
trr1
Reverse Recovery Time
See Fig. 5, 10
trr2
IRRM1
IRRM2
Qrr1
Qrr2
Peak Recovery Current
See Fig. 6
Reverse Recovery Charge
See Fig. 7
See Fig. 8
ns
Test Conditions
A
IF = 1.0A, dif/dt = 200A/µs, VR = 30V
TJ = 125°C
nC
TJ = 25°C
TJ = 125°C
A/µs
TJ = 25°C
TJ = 125°C
Thermal - Mechanical Characteristics
Parameter
Min
Typ
Max
Units
-
-
300
°C
k/W
Tlead !
Lead Temperature
RthJC
Thermal Resistance, Junction to Case
-
-
1.7
RthJA "
Thermal Resistance, Junction to Ambient
-
-
40
RthCS$
Thermal Resistance, Case to Heat Sink
-
0.25
-
Wt
Weight
-
6.0
-
Mounting Torque
g
-
0.21
-
(oz)
6.0
-
12
Kg-cm
5.0
-
10
lbf•in
! 0.063 in. from Case (1.6mm) for 10 sec
"#Typical Socket Mount
$ Mounting Surface, Flat, Smooth and Greased
2
www.irf.com
HFA08PB120
Bulletin PD-2.365 rev. B 11/00
1000
T = 150˚C
J
125˚C
100
100˚C
10
1
0.1
25˚C
0.01
0
300
600
900
1200
Reverse Voltage - VR (V)
Fig. 2 - Typ. Values Of Reverse Current
Vs. Reverse Voltage
10
100
Junction Capacitance - CT (pF)
Instantaneous Forward Current - I F (A)
Reverse Current - I R (µA)
100
T = 150˚C
J
T = 125˚C
J
T = 25˚C
J
1
0
2
4
6
8
T = 25˚C
J
10
1
10
1
10
100
1000
10000
Reverse Voltage - VR (V)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage
Forward Voltage Drop - VFM (V)
Fig. 1 - Max. Forward Voltage Drop Characteristics
Thermal Impedance Z thJC (°C/W)
10
1
D = 0.50
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01
0.1
PDM
t1
Single Pulse
(Thermal Resistance)
t2
Notes:
1. Duty factor D = t1/ t 2
2. Peak Tj = Pdm x ZthJC + Tc
0.01
0.00001
0.0001
0.001
0.01
t1, Rectangular Pulse Duration (Seconds)
0.1
1
Fig. 4 - Max. Thermal Impedance Z thJC Characteristics
www.irf.com
3
HFA08PB120
Bulletin PD-2.365 rev. B 11/00
20
160
V R= 160V
T J = 125˚C
T J = 25˚C
IF = 8 A
IF = 4 A
140
16
IF = 8 A
IF = 4 A
12
100
Irr ( A)
trr ( ns )
120
80
8
60
4
40
VR = 160V
TJ = 125˚C
TJ = 25˚C
20
100
0
100
1000
1000
di F /dt (A/µs )
di F /dt (A/µs )
Fig. 5 - Typical Reverse Recovery
Vs. dif /dt
Fig. 6 - Typical Recovery Current
Vs. dif /dt
1200
1000
VR = 160V
TJ = 125˚C
TJ = 25˚C
1000
di(REC) M/dt (A/µs )
IF = 8 A
IF = 4 A
800
Qrr ( nC )
IF = 8 A
IF = 4 A
600
400
100
200
VR = 160V
TJ = 125˚C
TJ = 25˚C
0
100
1000
di F /dt (A/µs )
Fig. 8 - Typical Stored Charge vs. dif /dt
4
10
100
1000
di F /dt (A/µs )
Fig. 7 - Typical di(REC) M/dt vs. dif /dt
www.irf.com
HFA08PB120
Bulletin PD-2.365 rev. B 11/00
Reverse Recovery Circuit
VR = 200V
0.01 Ω
L = 70µH
D.U.T.
di
F /dt
dif/dt
ADJUST
D
IRFP250
G
S
Fig. 9- Reverse Recovery Parameter Test Circuit
3
t rr
IF
tb
ta
0
2
Q rr
I RRM
4
0.5 I RRM
di(rec)M/dt
5
0.75 I RRM
1
di
diFf /dt
1. diF/dt - Rate of change of current through zero
crossing
2. IRRM - Peak reverse recovery current
3. trr - Reverse recovery time measured from zero
crossing point of negative going IF to point where
a line passing through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current
4. Qrr - Area under curve defined by t rr
and IRRM
t rr x I RRM
Q rr =
2
5. di (rec) M / dt - Peak rate of change of
current during t b portion of t rr
Fig. 10 - Reverse Recovery Waveform and Definitions
www.irf.com
5
HFA08PB120
Bulletin PD-2.365 rev. B 11/00
Outline Table
Conforms to JEDEC Outline TO-247AC
Dimensions in millimeters and (inches)
Ordering Information Table
Device Code
HF
A
08
1
2
3
1
-
Hexfred Family
2
-
Process Designator
PB 120
4
5
A
= Electron Irradiated
B
= Platinum Diffused
3
-
Current Rating
4
-
Package Outline
(PB = TO-247, 2 pins)
5
-
Voltage Rating
(120 = 1200V)
WORLD HEADQUA
EUROPEAN HEADQUA
IR CA
IR GER
IR
IR FAR
IR SOUTHEAST
IR T
(08 = 8A)
http
6
www.irf.com
HFA08PB120
Bulletin PD-2.365 rev. B 11/00
WORLD HEADQUARTERS:
EUROPEAN HEADQUARTERS:
IR CANADA:
IR GERMANY:
IR ITALY:
IR FAR EAST:
IR SOUTHEAST ASIA:
IR TAIWAN:
233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332.
Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408.
15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801.
Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933.
Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220.
K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086.
1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630.
16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936.
http://www.irf.com
www.irf.com
Fax-On-Demand: +44 1883 733420
Data and specifications subject to change without notice.
7