Bulletin PD -2.340 rev. A 11/00 HFA15PB60 HEXFRED Ultrafast, Soft Recovery Diode TM Features • • • • • VR = 600V BASE CATHODE Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions 4 Qrr (typ.)= 80nC 2 Benefits • Reduced RFI and EMI • Reduced Power Loss in Diode and Switching Transistor • Higher Frequency Operation • Reduced Snubbing • Reduced Parts Count VF(typ.)* = 1.3V IF(AV) = 15A 1 CATHODE IRRM (typ.) = 4.0A 3 ANODE 2 trr(typ.) = 19ns di(rec)M/dt (typ.)* = 160A/µs Description International Rectifier's HFA15PB60 is a state of the art ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 15 amps continuous current, the HFA15PB60 is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA15PB60 is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. TO-247AC (Modified) Absolute Maximum Ratings Parameter VR IF @ TC = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max Units 600 15 150 60 74 29 V -55 to +150 A W C * 125°C 1 HFA15PB60 Bulletin PD-2.340 rev. A 11/00 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameter Min Typ Max Units V BR Cathode Anode Breakdown Voltage 600 V VFM Max Forward Voltage IRM Max Reverse Leakage Current CT Junction Capacitance 1.3 1.7 1.5 2.0 1.2 1.6 1.0 10 400 1000 25 50 LS Series Inductance 12 V µA pF nH Test Conditions IR = 100µA IF = 15A See Fig. 1 IF = 30A IF = 15A, TJ = 125°C See Fig. 2 VR = VR Rated TJ = 125°C, VR = 0.8 x VR RatedD Rated See Fig. 3 VR = 200V Measured lead to lead 5mm from package body Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) Parameter t rr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Reverse Recovery Time See Fig. 5, 10 Peak Recovery Current See Fig. 6 Reverse Recovery Charge See Fig. 7 Peak Rate of Fall of Recovery Current During tb See Fig. 8 Min Typ Max Units 19 42 74 4.0 6.5 80 220 188 160 60 120 6.0 10 180 600 Test Conditions IF = 1.0A, dif/dt = 200A/µs, VR = 30V ns TJ = 25°C TJ = 125°C IF = 15A TJ = 25°C A TJ = 125°C VR = 200V TJ = 25°C nC TJ = 125°C dif/dt = 200A/µs TJ = 25°C A/µs TJ = 125°C Thermal - Mechanical Characteristics Parameter Tlead! RthJC RthJA" RthCS# Lead Temperature Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heat Sink Wt Weight Mounting Torque Min Typ Max Units 300 1.7 40 °C K/W 12 10 g (oz) Kg-cm lbf•in 0.25 6.0 0.21 6.0 5.0 ! 0.063 in. from Case (1.6mm) for 10 sec " Typical Socket Mount # Mounting Surface, Flat, Smooth and Greased 2 www.irf.com HFA15PB60 Bulletin PD-2.340 rev. A 11/00 Reverse Current - IR (µA) 10000 TJ = 150°C TJ = 150°C 1000 100 TJ = 125°C 10 1 0.1 TJ = 25°C A 0.01 TJ = 125°C 10 0 100 200 300 400 500 600 Reverse Voltage - V R (V) TJ = 25°C Fig. 2 - Typical Reverse Current vs. Reverse Voltage 100 A 1 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 ForwardVoltage VoltageDrop Drop- -VVFM (V) Forward FM(V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current Junction Capacitance -CT (pF) Instantaneous Forward Current - IF (A) 100 A TJ = 25°C A 10 10 100 1000 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Thermal Response (Z thJC ) 10 1 D = 0.50 0.20 0.10 0.1 0.01 0.00001 P DM 0.05 0.02 0.01 t1 SINGLE PULSE (THERMAL RESPONSE) t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics www.irf.com 3 HFA15PB60 Bulletin PD-2.340 rev. A 11/00 100 25 VR = 200V TJ = 125°C TJ = 25°C I F = 30A I F = 15A I F = 5.0A 80 20 I F = 30A I F = 15A Irr- ( A) trr- (ns) I F = 5.0A 60 40 15 10 20 5 VR = 200V TJ = 125°C TJ = 25°C 0 100 A di f /dt - (A/µs) 10000 800 VR = 200V TJ = 125°C TJ = 25°C VR = 200V TJ = 125°C TJ = 25°C I F = 30A di (rec) M/dt- (A /µs) I F = 15A Qrr- (nC) di f /dt - (A/µs) 1000 Fig. 6 - Typical Recovery Current vs. dif/dt Fig. 5 - Typical Reverse Recovery Time vs. dif/dt 600 A 0 100 1000 IF = 5.0A 400 I F = 30A I F = 15A 1000 I F = 5.0A 200 0 100 A di f /dt - (A/µs) 1000 Fig. 7 - Typical Stored Charge vs. dif/dt 4 100 100 A di f /dt - (A/µs) 1000 Fig. 8 - Typical di(rec)M/dt vs. dif/dt www.irf.com HFA15PB60 Bulletin PD-2.340 rev. A 11/00 3 t rr IF REVERSE RECOVERY CIRCUIT tb ta 0 Q rr VR = 200V 2 I RRM 4 0.5 I RRM di(rec)M/dt 0.01 Ω L = 70µH D.U.T. dif/dt ADJUST D G IRFP250 S Fig. 9 - Reverse Recovery Parameter Test Circuit www.irf.com 5 0.75 I RRM 1 di f /dt 1. dif/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by trr and IRRM trr X IRRM Qrr = 2 5. di(rec)M/dt - Peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions 5 HFA15PB60 Bulletin PD-2.340 rev. A 11/00 Conforms to JEDEC Outline TO-247AC MODIFIED Dimensions in millimeters and inches WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: http://www.irf.com 6 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice. www.irf.com