P7(6) P7(7) P7(5) P5(5) P7(4) P5(7) Vss MGA outline P6(6) 0.050" pitch grid Vss Vdd P3(1) P3(3) P3(7) P4(3) P6(5) P6(7) P3(3) P3(4) P3(2) P3(0) P3(5) P4(1) P4(5) P4(7) P3(7) P3(1) P2(1) P2(3) P1(1) P1(5) SMP P0(5) P2(7) P5(3) P4(3) P6(4) Package P5(1) P2(0) P5(0) Vss P2(2) P3(6) P1(3) P1(0) P2(4) P1(2) P2(6) P7(1) P1(7) P1(4) P0(2) P3(6) P2(5) P0(0) P1(6) P4(0) P0(1) P0(6) XRES P4(2) P0(7) P0(3) P0(4) P4(4) P4(0) Vdd P4(6) Foot Part # P5(2) P4(4) P4(2) P6(1) P4(6) TQFP44 C3850 SSOP48 C3847 SSOP28 C3846 SOIC28 C3849 PDIP28 C4104 TQFP100 SF-QFE100SC-L-CY Vss Mask hole location P7(0) P7(2) P7(3) P5(4) P5(6) P6(3) P6(2) P6(0) Vdd Mask tooling pin location Off grid pin location Top View X-Ray View (looking down through POD) 4 of 4 Page:___ EA-8C29000-NQ-01 Drawing © 2005 IRONWOOD ELECTRONICS, INC. PO BOX 21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: preliminary Scale: ____ Rev: C Drawing: M. Tully Date: 10/5/05 File: EA-8C29000-NQ-01 Dwg.mcd Modified: 6/13/05, MT Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.