SF-QFN32A-L

PROPRIETARY AND CONFIDENTIAL - THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF IRONWOOD ELECTRONICS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF IRONWOOD ELECTRONICS, INC. IS PROHIBITED.
5.00
PIN 1
ORIENTATION
4.20 TYP
5.54
3.60
0.80 TYP
0.25
0.50
4.00
0.40 (32)
TOP VIEW
SIDE VIEW
BOTTOM VIEW
ITEM NO.
2
Description
1
PCB Panel
2
-64F type Giga-snaP
Material
Material <not specified>
N/A
3.20±0.50
1
0.30
FRONT VIEW
Description: 32 pin 0.8mm pitch QFN SMT foot
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SF-QFN32A-L-02 Drawing
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 0.18
STATUS: Released
SHEET: 1 OF 2
REV. C
ENG: M. Tully
DRAWN BY: M. Raske
SCALE: 8:1
FILE: SF-QFN32A-L-02 Dwg
DATE: 10/24/2014
Rev
Date
Initials Description
A
12/22/05
HH
Original
B
6/29/07
JG
Remove epoxy
C
10/24/14
MR Replaced SK-UGA6/33A-13 with With -64F type Giga-SnaP connector (female receptale), recreated in SW
Description:
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
Drawing
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material:
Finish:
Weight:
STATUS: Released
SHEET: 2 OF 2
REV. C
ENG: M. Tully
DRAWN BY: M. Raske
SCALE: 8:1
FILE: SF-QFN32A-L-02 Dwg
DATE: 10/24/2014