S6SAP413A 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide Doc. No. 002-08678 Rev. *A Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 http://www.cypress.com Copyrights © Cypress Semiconductor Corporation, 2014-2016. This document is the property of Cypress Semiconductor Corporation and its subsidiaries, including Spansion LLC (“Cypress”). This document, including any software or firmware included or referenced in this document (“Software”), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress’s patents that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohibited. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. Cypress products are not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weapons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems (including resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where the failure of the device or system could cause personal injury, death, or property damage (“Unintended Uses”). A critical component is any component of a device or system whose failure to perform can be reasonably expected to cause the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products. Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, PSoC, CapSense, EZ-USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners. . S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 2 Preface Purpose of this manual and intended readers This manual explains how to use the evaluation board. Be sure to read this manual before using the product. For this product, please consult with sales representatives or support representatives. Handling and use Handling and use of this product and notes regarding its safe use are described in the manuals. Follow the instructions in the manuals to use this product. Keep this manual at hand so that you can refer to it anytime during use of this product. Notice on this document All information included in this document is current as of the date it is issued. Such information is subject to change without any prior notice. Please confirm the latest relevant information with the sales representatives. S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 3 Preface Caution of the Products Described in this Document The following precautions apply to the product described in this manual. WARNING Electric shock, Damage Indicates a potentially hazardous situation which could result in death or serious injury and/or a fault in the user’s system if the product is not used correctly. Before performing any operation described in this manual, turn off all the power supplies to the system. Performing such an operation with the power on may cause an electric shock or device fault. Electric shock, Once the product has been turned on, do not touch any metal part of it. Damage Doing so may cause an electric shock or device fault. CAUTION Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this product or devices connected to it, or may cause to loose software resources and other properties such as data, if the device is not used appropriately. Cuts, Damage Cuts Damage Before moving the product, be sure to turn off all the power supplies and unplug the cables. Watch your step when carrying the product. Do not use the product in an unstable location such as a place exposed to strong vibration or a sloping surface. Doing so may cause the product to fall, resulting in an injury or fault. The product contains sharp edges that are left unavoidably exposed, such as jumper plugs. Handle the product with due care not to get injured with such pointed parts. Do not place anything on the product or expose the product to physical shocks. Do not carry the product after the power has been turned on. Doing so may cause a malfunction due to overloading or shock. Damage Damage Since the product contains many electronic components, keep it away from direct sunlight, high temperature, and high humidity to prevent condensation. Do not use or store the product where it is exposed to much dust or a strong magnetic or electric field for an extended period of time. Inappropriate operating or storage environments may cause a fault. Use the product within the ranges given in the specifications. Operation over the specified ranges may cause a fault. Damage To prevent electrostatic breakdown, do not let your finger or other object come into contact with the metal parts of any of the connectors. Before handling the product, touch a metal object (such as a door knob) to discharge any static electricity from your body. Damage When turning the power on or off, follow the relevant procedure as described in this document. Before turning the power on, in particular, be sure to finish making all the required connections. Furthermore, be sure to configure and use the product by following the instructions given in this document. Using the product incorrectly or inappropriately may cause a fault. Damage Because the product has no casing, it is recommended that it be stored in the original packaging. Transporting the product may cause a damage or fault. Therefore, keep the packaging materials and use them when re-shipping the product. S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 4 Contents 1. Description ..................................................................................................................................................................... 6 2. Evaluation Board Specification .................................................................................................................................... 7 3. Pin Descriptions ............................................................................................................................................................ 8 3.1 3.2 Input/Output Pin Description .................................................................................................................................. 8 Jumper, Switch Description ................................................................................................................................... 8 4. Setup and Verification ................................................................................................................................................... 9 5. Component and Wiring Layout................................................................................................................................... 10 5.1 5.2 Component layout................................................................................................................................................ 10 Wiring Layout....................................................................................................................................................... 11 6. Circuit Schematic ........................................................................................................................................................ 13 7. Component List ........................................................................................................................................................... 14 8. Evaluation Board Picture ............................................................................................................................................ 16 9. Ordering Information ................................................................................................................................................... 17 10. Major Changes ............................................................................................................................................................. 18 11. Revision History .......................................................................................................................................................... 19 Document Revision History ........................................................................................................................................... 19 S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 5 1. Description The S6SAP413A is the evaluation board for 3ch Buck + 1ch Buck/Boost DC/DC, S6AP413A. This board implements S6AP413A, and output preset voltage DD1:1.0V, DD2:1.8V, DD3:3.3V, DD4:1.0V (Option-code 2 79), DD1:1.0V, DD2:1.5V, DD3:3.3V, DD4:1.2V (Option-code 6B). Also, this board implements the I C interface. The separated communication tool is sold, and it can select the output voltage, soft-start time, 2 ON/OFF sequence, PFM/PWM mode easily with I C communication using windows PC and prepared software. Figure 1. Board Outline S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 6 2. Evaluation Board Specification Table 1. Evaluation Board Specification Item Symbol Min Typ Max Unit Option Code Input voltage VIN 2.5 3.3 5.5 V 79/6B Output voltage Vo1 0.988 1.00 1.012 V 79/6B Output current Io1 - - 2000 mA 79/6B Output voltage Vo2 1.778 1.80 1.822 1.482 1.50 1.518 Output current Io2 - - 1200 mA 79/6B Output voltage Vo3 3.23 3.30 3.37 V 79/6B Output current Io3 - - 600 mA 79/6B 0.988 1.00 1.012 1.185 1.20 1.215 - - 2000 Output voltage Vo4 Output current Io4 V V mA 79 6B 79 6B 79/6B Board size : 28mm × 28mm S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 7 3. Pin Descriptions 3.1 Input/Output Pin Description Table 2. Input/Output Pin Description Block DD1 DD2 DD3 DD4 CTL I2C COMMON 3.2 Pin Symbol I/O Function Description Vo1 O DD1 output terminal PG1 O DD1 POWERGOOD output monitor terminal Vo2 O DD2 output terminal PG2 O DD2 POWERGOOD output monitor terminal Vo3 O DD3 output terminal PG3 O DD3 POWERGOOD output monitor terminal Vo4 O DD4 output terminal PG4 O DD4 POWERGOOD output monitor terminal CTL1 I DD1 control terminal CTL2 I DD2 control terminal CTL3 I DD3 control terminal CTL4 I DD4 control terminal CTLM I Control terminal for common block and logic block DVCC I Power supply terminal for I2C. SCL I I2C clock terminal SDA I/O I2C data I/O terminal VIN I Power supply terminal GND - Ground terminal Jumper, Switch Description Table 3. Jumper, Switch Description Jumper, Switch JP1 Description Short VIN terminal and VBUS pin (2 pin) Initial Setting Open 1,8,12,14,17 : GND pin 2 : VIN pin CN1 4 : DVCC pin 5 : SCL pin - 6 : SDA pin 3,7,9,10,11,13,15,16,18,19,20 : open S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 8 4. Setup and Verification S6AP413A preset value can be evaluated with stabilized power supply. 1. 3.3V is applied to VIN terminal. 2. CTLM,CTL1,CTL2,CTL3, CTL4 are connected to VIN terminal. 3. Vo1:1.0V, Vo2:1.8V, Vo3:3.3V, Vo4:1.0V is output. (Option code : 79) Vo1:1.0V, Vo2:1.5V, Vo3:3.3V, Vo4:1.2V is output. (Option code : 6B) Figure 2. For Control Switch Evaluation S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 9 5. Component and Wiring Layout 5.1 Component layout Figure 3. Component Layout (Layer 1) Figure 4. Component Layout (Layer 4) S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 10 Serial Programming Connection 5.2 Wiring Layout Figure 5. Wiring Layout (Layer 1) Figure 6. Wiring Layout (Layer 2) S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 11 Serial Programming Connection Figure 7. Wiring Layout (Layer 3) Figure5-8 Wiring Layout (Layer 4) S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 12 6. Circuit Schematic Figure 9. Circuit Schematic for Power Block VIN M1 Vi1 Vi2 GND1 GND2 IN1 23 C1 PVCC1 22 L1 Vo1 1uH PGND1 47uF C2 LX1 4.7uF VIN 24 21 VIN PG1 R5 28 100Kohms PG1 PGND4 18 19 L4 Vo4 1uH 47uF LX4 C12 PVCC4 IN4 C11 17 4.7uF VIN 20 PVCC2 5 C4 IN2 LX2 4.7uF VIN 8 Vo2 L2 6 22uF PGND2 C5 1uH 7 VIN PG2 R6 100Kohms 29 PG2 R4 31 PVCC3 PG4 4 C7 100Kohms PG4 LX3_1 4.7uF VIN VIN 3 L3 1uH Vo3 32 SCL C15 SCL SDA SDA 16 LX3_2 DVCC VIN 1 1 0.1uF R8 DVCC R9 DVCC 33uF C8 VO3 JP1 14 15 PGND3 SCL SDA PG3 R7 VIN 100Kohms 30 9 CTL1 CTL3 11 SCL 5 SDA 6 9 CTLMAIN CTL3 R1 10 0ohms 11 10Kohms R3 27 C14 AVCC CTL2 0.1uF 10 4 8 VIN CTL2 DVCC 7 PG3 CTL1 2 3 2 12 CTLM 25 13 14 15 26 GND 16 17 18 19 13 33 EP C16 12 VREF18 CTL4 1uF CTL4 20 GND1 VBUS USBVCC I2CVCC SCL SDA P10 GND2 P11 GND3 P12 GND4 P13 GND5 P14 P15 GND6 P21 P22 P23 CN1 S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 13 7. Component List Table 4. Component List No. Component Item Parts Number Vendor Value 1 M1 PMIC S6AP413A Cypress - Remarks - 2 L1 Inductor 1276AS-H-1R0M TOKO 1.0µH - 3 L2 Inductor 1276AS-H-1R0M TOKO 1.0µH - 4 L3 Inductor 1276AS-H-1R0M TOKO 1.0µH - 5 L4 Inductor 1276AS-H-1R0M TOKO 1.0µH - 6 C14 Ceramic Capacitor C1005JB1H104K050BB TDK 0.1µF 50V 7 C15 Ceramic Capacitor C1005JB1H104K050BB TDK 0.1µF 50V 8 C16 Ceramic Capacitor C1608X5R1H105K080AB TDK 1µF 50V 9 C1 Ceramic Capacitor C1608X5R1V475K080AC TDK 4.7µF 35V 10 C4 Ceramic Capacitor C1608X5R1V475K080AC TDK 4.7µF 35V 11 C7 Ceramic Capacitor C1608X5R1V475K080AC TDK 4.7µF 35V 12 C11 Ceramic Capacitor C1608X5R1V475K080AC TDK 4.7µF 35V 13 C5 Ceramic Capacitor C2012X5R1A226K125AB TDK 22µF 10V 14 C8 Ceramic Capacitor C2012X5R1A336M125AC TDK 33µF 10V 15 C2 Ceramic Capacitor C2012X5R1A476M125AC TDK 47µF 10V 16 C2 Ceramic Capacitor C2012X5R1A476M125AC TDK 47µF 10V 17 R1 Chip Resistor RK73Z1E KOA 0Ω 18 R4 Chip Resistor RR0816P103D SUSUMU 10kΩ 19 R5 Chip Resistor RR0510P-104-D SUSUMU 100kΩ 20 R6 Chip Resistor RR0510P-104-D SUSUMU 100kΩ 21 R7 Chip Resistor RR0510P-104-D SUSUMU 100kΩ 22 R8 Chip Resistor RR0510P-222-D SUSUMU 2.2kΩ 23 R9 Chip Resistor RR0510P-222-D SUSUMU 2.2kΩ 24 CN1 Connector 2214R-20SG-85-F1 Neltron Industrial Co., Ltd. - Under 50mV ±0.5%, ±25ppm/ºC ±0.5%, ±25ppm/ºC ±0.5%, ±25ppm/ºC ±0.5%, ±25ppm/ºC ±0.5%, ±25ppm/ºC ±0.5%, ±25ppm/ºC 1x20pin header (2.54pitch) Un mounted S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 14 Serial Programming Connection No. Component Item Parts Number Vendor Value Remarks 25 Vi1/Vi2,GND1/ GND2,DVCC,S CL,SDA,CTLM, CTL1,CTL2,CT L3,CTL4,Vo1,P G1,Vo2,PG2,V o3,PG3,Vo4,P G4 Terminal HIF3H-20PB-2.54DSA HIROSE - - 26 JP1 Solder jumper Solder jumper - - Un mounted These components are compliant with RoHS, and please ask each vendor for details if necessary. S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 15 8. Evaluation Board Picture Figure 10. Picture(Top) Figure 11. Picture (Back) S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 16 9. Ordering Information Table 5. Ordering Information Part Number EVB Revision Note S6SAP413A79SA1001 Rev 1.0 --- S6SAP413A6BSA1001 Rev 2.0 --- S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 17 10. Major Changes Spansion Publication Number: S6SAP413A_SS901-00026-3v0-E Page Section Change Results Revision 1.0 - - Initial release Revision 2.0 Revised the Component of Component list 12 7. Component list Vi-->Vi1/Vi2 GND-->GND1/GND2 14 9. Ordering Information Revised the Part number of Ordering Information S6SPA413A79SA1001 --> S6SAP413A79SA1001 Revision 3.0 5 1. Description Adding Option code : 6B 5 2. Evaluation board specification Adding Option code : 6B 7 4. Setup and verification Adding Option code : 6B 8 5. Component and wiring layout Updated to Rev.2.0 11 6. Circuit schematic Updated 14 9. Ordering Information Adding the Part number of Ordering Information S6SAP413A6BSA1001 Note: Please see Document Revision History for more Details S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 18 11. Revision History Document Revision History Document Title: S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide Document Number:002-08678 Revision Issue Date Origin of Change Description of Change ** 11/28/2014 TAOA Initial Release *A 05/04/2016 TAOA Migrated Spansion guide “SS901-00026-3v0-E“ to Cypress format S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board Operation Guide, Doc. No. 002-08678 Rev. *A 19