S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide Doc. No. 002-08727 Rev. *A Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone (USA): 800.858.1810 Phone (Intnl): +1 408.943.2600 www.cypress.com Copyrights © Cypress Semiconductor Corporation, 2015-2016. This document is the property of Cypress Semiconductor Corporation and its subsidiaries, including Spansion LLC (“Cypress”). This document, including any software or firmware included or referenced in this document (“Software”), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, nonexclusive, nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress’s patents that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohibited. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. Cypress products are not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weapons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems (including resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where the failure of the device or system could cause personal injury, death, or property damage (“Unintended Uses”). A critical component is any component of a device or system whose failure to perform can be reasonably expected to cause the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products. Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, PSoC, CapSense, EZ-USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners. S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 2 Preface This manual explains how to use the evaluation board. Be sure to read this manual before using the product. For this product, please consult with sales representatives or support representatives. Handling and Use Handling and use of this product and notes regarding its safe use are described in the manuals. Follow the instructions in the manuals to use this product. Keep this manual at hand so that you can refer to it anytime during use of this product. Notice on this Document All information included in this document is current as of the date it is issued. Such information is subject to change without any prior notice. Please confirm the latest relevant information with the sales representatives. S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 3 Cautions Caution of the Products Described in this Document The following precautions apply to the product described in this manual. WARNING Indicates a potentially hazardous situation which could result in death or serious injury and/or a fault in the user’s system if the product is not used correctly. WARNING Do not look directly at LED. There is a possibility that your eye is hurt. Electric shock, Damage Electric shock, Damage CAUTION Cuts, Damage Cuts Before performing any operation described in this manual, turn off all the power supplies to the system. Performing such an operation with the power on may cause an electric shock or device fault. Once the product has been turned on, do not touch any metal part of it. Doing so may cause an electric shock or device fault. Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this product or devices connected to it, or may cause to loose software resources and other properties such as data, if the device is not used appropriately. Before moving the product, be sure to turn off all the power supplies and unplug the cables. Watch your step when carrying the product. Do not use the product in an unstable location such as a place exposed to strong vibration or a sloping surface. Doing so may cause the product to fall, resulting in an injury or fault. The product contains sharp edges that are left unavoidably exposed, such as jumper plugs. Handle the product with due care not to get injured with such pointed parts. Damage Do not place anything on the product or expose the product to physical shocks. Do not carry the product after the power has been turned on. Doing so may cause a malfunction due to overloading or shock. Damage Since the product contains many electronic components, keep it away from direct sunlight, high temperature, and high humidity to prevent condensation. Do not use or store the product where it is exposed to much dust or a strong magnetic or electric field for an extended period of time. Inappropriate operating or storage environments may cause a fault. Damage Use the product within the ranges given in the specifications. Operation over the specified ranges may cause a fault. Damage To prevent electrostatic breakdown, do not let your finger or other object come into contact with the metal parts of any of the connectors. Before handling the product, touch a metal object (such as a door knob) to discharge any static electricity from your body. Damage When turning the power on or off, follow the relevant procedure as described in this document. Before turning the power on, in particular, be sure to finish making all the required connections. Furthermore, be sure to configure and use the product by following the instructions given in this document. Using the product incorrectly or inappropriately may cause a fault. Damage Because the product has no casing, it is recommended that it be stored in the original packaging. Transporting the product may cause a damage or fault. Therefore, keep the packaging materials and use them when reshipping the product. S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 4 Contents 1. Description ..................................................................................................................................................................... 6 2. Evaluation Board Specification .................................................................................................................................... 7 3. Pin Descriptions ............................................................................................................................................................ 8 3.1 3.2 4. Setup and Verification ................................................................................................................................................... 9 4.1 4.2 4.3 4.4 5. Input/Output Connecter Descriptions ..................................................................................................................... 8 Switch Descriptions ............................................................................................................................................... 8 Contents in a Package .......................................................................................................................................... 9 Evaluation with BLE Communication ..................................................................................................................... 9 Function of Application ........................................................................................................................................ 13 How to Do When LED Lighting can not be Controlled. ........................................................................................ 17 Layout ........................................................................................................................................................................... 18 5.1 5.2 Component Layout .............................................................................................................................................. 18 Wiring Layout....................................................................................................................................................... 19 6. Circuit Schematic ........................................................................................................................................................ 20 7. Component List ........................................................................................................................................................... 23 8. Property Data ............................................................................................................................................................... 26 9. Board Picture ............................................................................................................................................................... 29 10. Ordering Information ................................................................................................................................................... 30 Revision History ................................................................................................................................................................... 31 Document Revision History ........................................................................................................................................... 31 S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 5 1. Description S6SAL211A94SA1001 is the starter kit tool for BLE (*1) communication. The tool has one evaluation board, this board implements S6AL211A94, and LED driver controlled by BLE communication. It is necessary to prepare AC power cable, Android terminal (*2), Application software, LED module and connection cable. *1: BLE: Bluetooth® Low Energy *2: Prepare an Android terminal with Android OS 4.4.2 or 4.4.4. Figure 1-1 Board Outline AC 85V-264V LED,Thermistor S6SAL211A94SA1001 AC power cable Android terminal *Android4.4.2 or 4.4.4 S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 6 2. Evaluation Board Specification Figure 2-1 Evaluation Board Specification Item Symbol Min. Input voltage (with TUHS10F24) VINAC 85 Output LED voltage VLEDout 0 Output LED current ILEDout(W) ILEDout(R) ILEDout(G) ILEDout(B) - Board size - 58 93 Typ. Max. Unit 264 VRMS 18 24 V - 290 140 180 90 mA mm . S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 7 3. Pin Descriptions 3.1 Input/Output Connecter Descriptions Table 3-1 Input/Output Pin Descriptions Connecter Symbol I/O Function Description CN_AC I AC power supply terminal ACDC_OUT O 24V AC/DC module output ACDC_GND - GND CN009 I/O CH1 - CH4 LED , thermistor terminal MS_3V O 3V power supply terminal for motion sensor MS_IN I Input terminal for motion sensor MS_GND - GND terminal for motion sensor LSp O 3V power supply terminal for Illumination sensor LSm I Input terminal for Illumination sensor LSg - GND terminal for Illumination sensor CN061 I/O JTAG terminal for BLE module 3.2 Switch Descriptions Table 3-2 Switch Descriptions Switch SW062 Description Reset push switch for BLE module S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 8 4. Setup and Verification 4.1 Contents in a Package Table 4-1 S6SAL211A94SA1001 Contents List No. Contents Description Quantity Notes 1 S6SAL211A94-BLE-SA1 Evaluation board of 4CH 10W with S6AL211A94 1 - 2 Leaflet Described startup information 2 English, Japanese Figure 4-1 Contents Picture 1 2 4.2 Evaluation with BLE Communication Using Items for Evaluation with I2C Control Evaluation board 1pic (*1) AC power cable 1pic (*2) Android terminal with Android OS 4.4.2 or 4.4.4. 1pic (*2) Application software 1pic (*3) LED module(5 series 4ch) 1set (*2) Connection cable 1set (*2) S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 9 Setup and Verification *1: Included in a package. *2: Please prepare. Refer to 4.2.1 Operation *3: Please download it from our device home page. URL: http://www.cypress.com/S6AL211A S6AL211A94: BLE Application software file BLExLED.apk in S6AL211_BLExLED.cab 4.2.1 Operation WARNING Do not look directly at LED. There is a possibility that your eye is hurt. 1. Connect CN009 of the evaluation board and LED by connection cable. (*1) 2. Set some attributes in the application of Android terminal. (*2) 3. Connect AC plug of the evaluation board to AC power supply. 4. Connect Android terminal to BLE module by BLE communication. (*2) 5. When connection succeeds, it is possible to make them do various movement by application. (*3) 6. When ending operation, make the brightness level of the LED "0" and tap "Disconnect" button of "HOME" tab and cut power supply. Figure 4-2 Board Connection Evaluation Board CN009 AC 85V-264V LED,Thermistor (*1) AC power cable Connection cable(*1) Android terminal *1: Connect LED to all CH from CN009. Refer to 4.2.1.1 Connection of the Evaluation Board and LED. *2: Refer to 4.2.1.2 Setup with BLE Communication. *3: Refer to 4.3 Function of Application. S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 10 Setup and Verification 4.2.1.1 Connection of the Evaluation Board and LED Figure 4-3 Connection of the Evaluation Board and LED 2.54mm 10pin ×2 Connector CN009 -TH4 20 Evaluation board -LED4 18 LED,Thermistor (*2) 19 +TH4 CH4: Blue R 17 +LED4 (*1) NC 16 -TH3 14 -LED3 12 15 NC (*2) 13 +TH3 CH3: Green R 11 +LED3 (*2) -TH2 10 (*1) 9 +TH2 CH2: Red -LED2 8 R 7 +LED2 (*1) NC 6 5 NC (*2) -TH1 4 3 +TH1 CH1: White R -LED1 2 1 +LED1 (*1) *1: Connect LED to CN009. Driver's output channel and color of LED are fixing by application software. To indicate correct color, connect each channel exactly. Specification of LED module and resistor: LED (5-series) + resistor White: IF ≥ 1A, VF ≈ 3 V Ex: LUW CR7P(OSRAM) Red: IF ≥ 1A, VF ≈ 2.2 V Ex: LR CP7P(OSRAM) Green: IF ≥ 1A, VF ≈ 3.2 V Ex: LT CP7P(OSRAM) Blue: IF ≥ 1A, VF ≈ 3.2V Ex: LB CP7P(OSRAM) R: 10Ω 2W Be careful about polarity. *2: Thermistor (+TH,-TH) is an option. Even if that isn't connected, a board operates. Ex: NTCG104EF104FT1 (TDK) S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 11 Setup and Verification 4.2.1.2 Setup with BLE Communication 1. Start "BLExLED" by tapping icon in android tablet. (In advance, set on Bluetooth in Android OS) Set some attributes in the application. (Device Name #0) 2. Connect AC plug to AC power supply. 3. Tap "Connect" button in "HOME" tab. If connection succeeds, "BLE Connection SUCCESS!" is indicated in the display. 4. Refer to 4.3 Function of Application and operate. Starting App Setting of the Attribute (In Setting Page) Cypress Demo Cypress Demo1 Cypress Demo "Cypress Demo"← Check Return to “HOME” tab Connecting to BLE Module with BLE Communication Cypress Demo Cypress Demo 1 Cypress Demo Cypress Demo 1 Cypress Demo Cypress Demo 1 S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 12 Setup and Verification 4.3 Function of Application 4.3.1 "SEEKBER" Tab It is possible to change the brightness of each LED by swiping level of seek bar. When releasing a finger, brightness of LED changes. Maximum supply power of AC/DC module is 10.8W.Total maximum Output power is over 10W. When lighting White LED, make the lighting level of RGB LED "0". When lighting RGB LED, make the lighting level of White LED "0". 4.3.2 "TABLE" Tab It's possible to change the brightness of the White LED by swiping level of White Seek bar. It's possible to change color brightness of the RGB LED by swiping level of Strength Seek bar. It's possible to change the color of LED by tapping color table. When Strength Seek bar level is "0", RGB LED goes out. Maximum supply power of AC/DC module is 10.8W.Total maximum Output power is over 10W. When lighting White LED, make the lighting level of RGB LED "0". When lighting RGB LED, make the lighting level of White LED "0". S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 13 Setup and Verification 4.3.3 "SCENE" Tab "Preset Lighting" is operated by this table. Reading: Bright white lighting Dinner: Warm white lighting CYPRESS: Cypress blue color ALERT: Switching white and red (Sequence per second) Wakeup: gradually brighter (5 seconds sequence) Rainbow: Automatic color control Stop: Stop sequence of "ALERT", "Wake up" and "Rainbow". 4.3.4 "SENSOR" Tab It's possible to set a sensor setting and dimming curve at this table. Dimming curve type select "Linear" or "Log" It's possible to change the brightness of the white LED by swiping level of white seek bar. Fade Time: Setting of fade time When installing a sensor, below is used. (*1) Motion: Motion sensor on/off, stand-by detection time select "10sec" or "5min" Illuminance: Illuminance sensor on/off (*2) Common: It's used for setting change. The following item can be chosen by a pulldown. QUERYS: S6Al211A94 memory reading command (*3) MEMSET: S6Al211A94 memory writing in command (*3) BLEGET: BLE module memory reading command (*4) BLESET: BLE module memory writing in command (*4) *1: Refer to 4.3.4.1. Example of Sensor Use *2: When using a motion sensor, illumination sensor can not be used. *3: Refer to 4.3.4.2 S6Al211A94 Control Command *4: Refer to 4.3.4.3. BLE Module Control Command S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 14 Setup and Verification 4.3.4.1 Example of Sensor Use When using the sensor function of the application, prepare the outside sensor parts. The recommended parts are as follows. Figure 4-4 Example of Sensor Use Illuminance Sensor C 3V Evaluation board C067 R061 S6AL211A94 Motion Sensor LSp LSg 48:VO 39:SENSE3/ADD3 E LSm 0.1 μF Ex: NJL7502L JRC 6.5 kΩ Vdd MS_3V 40:SENSE4/ADD4 C065 R076 Ex: EKMB130111 Panasonic 0.1 μF MS_IN OUT MS_GND GND 4.3.4.2 S6Al211A94 Control Command QUERYS: "1st argument: read address" is input, and "Send" button is pushed. Data or "TRUE" or "FALSE" of memory is indicated. MEMSET: "1st argument: write address" and "2nd argument: write data" is input, and "Send" button is pushed. "OK" is indicated. Note: Refer to hardware manual of S6AL211A94 for details of the address and write data. Ex: QUERYS Ex: MEMSET Write address Read address Read data Write data Data transmission completion S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 15 Setup and Verification 4.3.4.3 BLE Module Control Command Table 4-2 BLEGET Command Command 1st Argument Address 2nd Argument Data 01 Response 00 Turning on the lights threshold reading of illumination sensor 01 Turning off the lights threshold reading of illumination sensor - Reply interval time reading of illumination sensor 00 BLEGET Function HH LL<CR><LF> (*1) HH LL<CR><LF> (*2) Initial Value 00 02 00 08 00 05 Table 4-3 BLESET Command Comman d 1st Argument Address 2nd Argument Address/Dat a 3rd Argument Data 4th Argument Data HH (*1) LL (*1) LL (*2) - 00 00 BLESET 01 01 HH (*2) Function Response Turning on the lights threshold writing of illumination sensor Turning off the lights threshold writing of illumination sensor Reply interval time writing of illumination sensor OK<CR><LF > OK<CR><LF > *1: Threshold (hexadecimal number). HH: Upper 2bit data, LL: Lower 8bit data Only lower rank 2bit is effective for HH data. Set Turning on the lights threshold smaller than Turning off the lights threshold. *2: Reply interval time (hexadecimal number). HH: Upper 2bit data, LL: Lower 8bit data Unit: 0.1 ms, Setting area: 0.1 ms to 6553.5 ms Ex: BLEGET Ex: BLESET Read address Write address Read data Write data Data transmission completion S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 16 Setup and Verification 4.4 How to Do When LED Lighting can not be Controlled. 1. Pull out AC plug 2. Exit "BLExLED" application 3. Turn off Bluetooth indicator in Android OS. 4. Turn on Bluetooth indicator in Android OS. 5. Connect AC plug to electrical outlet. 6. Start "BLExLED". (Continue as above-mentioned) S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 17 5. Layout 5.1 Component Layout Figure 5-1 Evaluation Board Component Layout Board size of 10W LED driver: 58mm x 93mm Layer1 (Top View) Layer4 (Top View) S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 18 Layout 5.2 Wiring Layout Figure 5-2 Evaluation Board Wiring Layout Layer 1 (Top View) Layer 2 (Top View) Layer 3 (Top View) Layer 4 (Top View) S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 19 6. Circuit Schematic Figure 6-1 Evaluation Board Circuit Schematic S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 20 Circuit Schematic Figure 6-2 Evaluation Board Circuit Schematic S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 21 Circuit Schematic Figure 6-3 Evaluation Board Circuit Schematic CH1 CH3 CH2 CH4 S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 22 7. Component List Table 7-1 Evaluation Board Component List Rated Voltage(V) Rated Current(A) 10 μF 35 - - TDK 4.7 μF 35 - - TDK 0.1 μF 50 - - C1608X5R1V475K TDK 4.7 μF 35 - - C1608X5R1V475K TDK 4.7 μF 35 - - C006 C1608CH1H101J TDK 100 pF 50 - - C007 C1608CH1H101J TDK 100 pF 50 - - 8 C009 EKMG350ELL471MJ16S NIPPON-CHEMI-CON 470 μF 35 - - 9 C061 C1608X5R1H104K080AA TDK 0.1 μF 50 - - 10 C065 C1608X5R1H104K080AA TDK 0.1 μF 50 - NMT 11 C067 C1608X5R1H104K080AA TDK 0.1 μF 50 - - 12 C068 C1608CH1H010C TDK 1 pF 50 - - 13 C069 C1608CH1H010C TDK 1 pF 50 - - 14 C101-1 C3216X5R1V475K160AB TDK 4.7 μF 35 - - 15 C102-1 C3225X5R1H106K TDK 10 μF 50 - - 16 C102-3 C1608CH1H102J TDK 0.001 μF 50 - NMT 17 C120 C1608X5R1H104K080AA TDK 0.1 μF 50 - NMT 18 C201-1 C3216X5R1V475K160AB TDK 4.7 μF 35 - - 19 C202-1 C3225X5R1H106K TDK 10 μF 50 - - 20 C202-3 C1608CH1H102J TDK 0.001 μF 50 - NMT 21 C220 C1608X5R1H104K080AA TDK 0.1 μF 50 - NMT 22 C301-1 C3216X5R1V475K160AB TDK 4.7 μF 35 - - 23 C302-1 C3225X5R1H106K TDK 10 μF 50 - - 24 C302-3 C1608CH1H102J TDK 0.001 μF 50 - NMT 25 C320 C1608X5R1H104K080AA TDK 0.1 μF 50 - NMT 26 C401-1 C3216X5R1V475K160AB TDK 4.7 μF 35 - - 27 C402-1 C3225X5R1H106K TDK 10 μF 50 - - 28 C402-3 C1608CH1H102J TDK 0.001 μF 50 - NMT 29 C420 C1608X5R1H104K080AA TDK 0.1 μF 50 - NMT 30 CN009 M20-9981045 Harwin Inc 210 pin - 3 - No. Component Parts Number Vendor 1 C001 C2012X5R1V106K125AC TDK 2 C002 C1608X5R1V475K 3 C003 C1608X5R1H104K080AA 4 C004 5 C005 6 7 Value S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A Remarks 23 Component List Rated Voltage(V) Rated Current(A) - 550 7.6 - Samtec - - - NMT SATOPARTS - 300 7 - SS23 FAIRCHILD - 30 2 - SS23 FAIRCHILD - 30 2 - D301 SS23 FAIRCHILD - 30 2 - D401 SS23 FAIRCHILD - 30 2 - 38 F001 RK73Z1J KOA 0Ω - 1 - 39 L101 CLF10040T-221M TDK 220 μH - 700 m - 40 L201 CLF10040T-221M TDK 220 μH - 700 m - 41 L301 CLF10040T-221M TDK 220 μH - 700 m - 42 L401 CLF10040T-221M TDK 220 μH - 700 m - 43 LED001 OSHR1608C1A OptoSupply - - 30 m NMT 44 M001 S6AL211A94 Cypress - - - - 45 M011 TUHS10F24 COSEL 24 V - - - 46 M061 MBH7BTZ02 FUJITSU - - - - 47 Q101 FDC658AP FAIRCHILD - 30 4 - 48 Q102 FDC8886 FAIRCHILD - 30 6.5 - 49 Q201 FDC658AP FAIRCHILD - 30 4 - 50 Q202 FDC8886 FAIRCHILD - 30 6.5 - 51 Q301 FDC658AP FAIRCHILD - 30 4 - 52 Q302 FDC8886 FAIRCHILD - 30 6.5 - 53 Q401 FDC658AP FAIRCHILD - 30 4 - 54 Q402 FDC8886 FAIRCHILD - 30 6.5 - 55 R003 RR0816P-104-D SSM 100 kΩ - - - 56 R004 RR0816P-123-D SSM 12 kΩ - - NMT 57 R072 RR0816P-101-D SSM 100Ω - - - 58 R076 RR0816P-274-D SSM 270 kΩ - - - 59 R101 RK73H1JTTD2R20F KOA 2.2Ω - - - 60 R102 RK73H1JTTD1R00F KOA 1Ω - - - 61 R103 RK73Z1J KOA 0Ω - 1 - 62 R104 RK73H1JTTD1004F KOA 1 MΩ - - NMT 63 R106 RK73H1JTTD1004F KOA 1 MΩ - - NMT 64 R107 RK73Z1J KOA 0Ω - 1 - 65 R120 RR0816P-752-D SSM 7.5 kΩ - - - 66 R201 RK73H1JTTD2R20F KOA 2.2Ω - - - 67 R202 RK73H1JTTD3R90F KOA 3.9Ω - - - 68 R203 RK73Z1J KOA 0Ω - 1 - 69 R204 RK73H1JTTD1004F KOA 1 MΩ - - NMT 70 R206 RK73H1JTTD1004F KOA 1 MΩ - - NMT 71 R207 RK73Z1J KOA 0Ω - 1 - 72 R220 RR0816P-752-D SSM 7.5 kΩ - - - No. Component Parts Number Vendor 31 CN061 TSW-104-14-L-S Samtec 32 CN062 FTSH-105-01-F-D-K-ND 33 CN_AC ML-2100-2P 34 D101 35 D201 36 37 Value S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A Remarks 24 Component List Rated Voltage(V) Rated Current(A) 2.2Ω - - - KOA 2.2Ω - - - KOA 0Ω - 1 - RK73H1JTTD1004F KOA 1 MΩ - - NMT RK73H1JTTD1004F KOA 1 MΩ - - NMT R307 RK73Z1J KOA 0Ω - 1 - R320 RR0816P-752-D SSM 7.5 kΩ - - - 80 R401 RK73H1JTTD2R20F KOA 2.2Ω - - - 81 R402 RK73H1JTTD2R20F KOA 2.2Ω - - NMT 82 R403 RK73Z1J KOA 0Ω - 1 - 83 R404 RK73H1JTTD1004F KOA 1 MΩ - - NMT 84 R406 RK73H1JTTD1004F KOA 1 MΩ - - NMT 85 R407 RK73Z1J KOA 0Ω - 1 - 86 R420 RR0816P-752-D SSM 7.5 kΩ - - - 87 R421 RK73Z1J KOA 0Ω - 1 - 88 SW062 SKRPACE010 ALPS - - 50 m - ABRACON 32.768 kHz - - - No. Component 73 R301 RK73H1JTTD2R20F KOA 74 R302 RK73H1JTTD2R20F 75 R303 RK73Z1J 76 R304 77 R306 78 79 89 X061 Parts Number ABS10-32r768kHz Vendor Value Remarks TDK : TDK Corporation NIPPON-CHEMI-CON : Nippon Chemi-Con Corporation Harwin Inc : Harwin Inc Samtec : Samtec, Inc. SATOPARTS : SATO PARTS CO.,LTD FAIRCHILD : Fairchild Semiconductor International, Inc. KOA : KOA Corporation SSM : Susumu Co., Ltd OptoSupply : OptoSupply Limited Cypress : Cypress Semiconductor Corp COSEL : COSEL CO., LTD. FUJITSU : FUJITSU COMPONENT LIMITED ALPS : Alps Electric Co., Ltd. ABRACON : Abracon Corporation NMT: No mount. These components are compliant with RoHS, and please ask each vendor for details if necessary. S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 25 8. Property Data Figure 8-1 Switching Waveform CH1 100% Dimming VINAC =100VRMS, ILEDout(W) = 290 mA LED: LUW CR7P (5 series + 10Ω) ACTUAL LEVEL = 255(Line) CH1: LED current (ILEDout(W)), 100 mA/div CH2: LEDp voltage (VLEDout(W)), 2V/div CH3: Switching node voltage(W), 5V/div CH3 100% Dimming VINAC =100VRMS, ILEDout(G) = 180 mA LED: LT CP7P (5 series + 10Ω) ACTUAL LEVEL = 255(Line) CH1: LED current (ILEDout(G)), 50 mA/div CH2: LEDp voltage (VLEDout(G)), 2V/div CH3: Switching node voltage(G), 5V/div CH2 100% Dimming VINAC =100VRMS, ILEDout(R) = 140 mA LED: LR CP7P (5 series + 10Ω) ACTUAL LEVEL = 255(Line) CH1: LED current (ILEDout(R)), 50 mA/div CH2: LEDp voltage (VLEDout(R)), 2V/div CH3: Switching node voltage(R), 5V/div CH4 100% Dimming VINAC =100VRMS, ILEDout(B) = 90 mA LED: LB CP7P (5 series + 10Ω) ACTUAL LEVEL = 255(Line) CH1: LED current (ILEDout(B)), 20 mA/div CH2: LEDp voltage (VLEDout(B)), 2V/div CH3: Switching node voltage(B), 5V/div S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 26 Property Data Figure 8-2 Switching Waveform CH1 10% Dimming VINAC =100VRMS, ILEDout(W) = 29 mA LED: LUW CR7P (5 series + 10Ω) ACTUAL LEVEL = 26(Line) CH1: LED current (ILEDout(W)), 10 mA/div CH2: LEDp voltage (VLEDout(W)), 2V/div CH3: Switching node voltage(W), 5V/div CH3 10% Dimming VINAC =100VRMS, ILEDout(G) = 18 mA LED: LT CP7P (5 series + 10Ω) ACTUAL LEVEL = 26(Line) CH1: LED current (ILEDout(G)), 5 mA/div CH2: LEDp voltage (VLEDout(G)), 2V/div CH3: Switching node voltage(G), 5V/div CH2 10% Dimming VINAC =100VRMS, ILEDout(R) = 14 mA LED: LR CP7P (5 series + 10Ω) ACTUAL LEVEL = 26(Line) CH1: LED current (ILEDout(R)), 5 mA/div CH2: LEDp voltage (VLEDout(R)), 2V/div CH3: Switching node voltage(R), 5V/div CH4 10% Dimming VINAC =100VRMS, ILEDout(B) = 9 mA LED: LB CP7P (5 series + 10Ω) ACTUAL LEVEL = 26(Line) CH1: LED current (ILEDout(B)), 2 mA/div CH2: LEDp voltage (VLEDout(B)), 2V/div CH3: Switching node voltage(B), 5V/div S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 27 Property Data Figure 8-3 Switching Waveform CH1 1% Dimming VINAC =100VRMS, ILEDout(W) = 2.9 mA LED: LUW CR7P (5 series + 10Ω) ACTUAL LEVEL = 2(Line) CH1: LED current (ILEDout(W)), 1 mA/div CH2: LEDp voltage (VLEDout(W)), 2V/div CH3: Switching node voltage(W), 5V/div CH3 1% Dimming VINAC =100VRMS, ILEDout(G) = 1.8 mA LED: LT CP7P (5 series + 10Ω) ACTUAL LEVEL = 2(Line) CH1: LED current (ILEDout(G)), 1 mA/div CH2: LEDp voltage (VLEDout(G)), 2V/div CH3: Switching node voltage(G), 5V/div CH2 1% Dimming VINAC =100VRMS, ILEDout(R) = 1.4 mA LED: LR CP7P (5 series + 10Ω) ACTUAL LEVEL = 2(Line) CH1: LED current (ILEDout(R)), 1 mA/div CH2: LEDp voltage (VLEDout(R)), 2V/div CH3: Switching node voltage(R), 5V/div CH4 1% Dimming VINAC =100VRMS, ILEDout(B) = 0.9 mA LED: LB CP7P (5 series + 10Ω) ACTUAL LEVEL = 2(Line) CH1: LED current (ILEDout(B)), 1 mA/div CH2: LEDp voltage (VLEDout(B)), 2V/div CH3: Switching node voltage(B), 5V/div S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 28 9. Board Picture Figure 9-1 Evaluation Board Picture (Top View) (Bottom View) S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 29 10. Ordering Information Table 10-1 Ordering Information Part Number S6SAL211A94SA1001 EVB Revision S6SAL211A94-BLE-SA1 Rev3.0 Note - S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 30 Revision History Document Revision History Document Title: S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide Document Number: 002-08727 Revision Issue Date Origin of Description of Change Change ** 06/12/2015 HSAT Initial release *A 04/25/2016 HSAT Migrated Spansion Guide from S6SAL211A94SA1001_SS901-00039-1v0-E,to Cypress format S6SAL211A94SA1001 4ch 10W LED Driver Board Operation Guide, Doc. No. 002-08727 Rev. *A 31