35V MAX Variable Output LDO Regulator BA00CC0WFP/WT(-V5) 1.5±0.2 BA00CC0WFP 9.5±0.5 5 1.5 4 1.27 2.5 3 0.5±0.1 1.0±0.2 TO252-5 BA00CC0WT + 0.3 – 0.1 4.5 + 0.3 – 0.1 2.8 φ 3.2 ± 0.1 + 0.2 – 0.1 8.0 ± 0.2 0.7 + 0.3 – 0.1 7.0 0.85 ± 0.2 + 0.4 – 0.2 12.0 ± 0.2 10.0 1.2 0.8 0.5 ± 0.1 1.778 2.85 1 2 3 4 5 TO220FP-5 BA00CC0WT(-V5) 4.5 + 0.3 – 0.1 2.8 (2.0) φ 3.2 ± 0.1 + 0.3 – 0.1 + 0.2 – 0.1 17.5 25.8 7.0 23.4 12.0 ± 0.2 + 0.4 17.0 – 0.2 31.5Max. 10.0 – 0.1 8.0 ± 0.2 1.8 ± 0.2 + 0.3 (Small mounting type and insertion type) 8) C pin output voltage accuracy : ±2% 2 0.5 17.0 1) Maximum output current : 1A 2) Output voltage setting (3V to 15V) by external resistor 3) Low drop-out voltage type with PNP output 4) 35V high-voltage process 5) Built-in over-voltage protection circuit, over-current protection circuit, thermal protection circuit 6) Built-in shutdown circuit which circuit current is 0uA. 7) Two types of package 0.5±0.1 5.5±0.2 1 13.5Min. Features 2.3±0.2 6.5±0.2 +0.2 5.1−0.1 2-C0.5 1.8 ± 0.2 BA00CC0WFP/WT(-V5) is a variable output LDO regulator IC with the output current of 1A and C pin voltage accuracy of ±2%. Output voltage can be set (3V to 15V) by external resistor. Over-current protection circuit, over-voltage protection circuit and thermal protection circuit are incorporated in this IC. BA00CC0WFP/WT(-V5) incorporates shutdown switch to control output ON/OFF. This IC is perfect for applications with high-voltage requirements and power supply applications. Dimension (Unit : mm) 0.8 Description 1.2 0.8 0.5 ± 0.1 Applications 1.778 12345 Consumer products TO220FP-5(V5) (2.85) 4.25 8.15 Absolute Maximum Ratings (Ta=25˚C) Parameter Limits Symbol Unit Supply voltage VCC -0.3 ~ +35 Vc Pin voltage VCTL -0.3 ~ Vcc TO252-5 TO220FP-5(V5) Power dissipation Storage temperature range Topr -40 Tstg -55 ~ +125 ~ +150 Junction temperature Tjmax 150 Peak supply voltage VCCPeak 50 V V *2 *3 1300 2000 Pd Operating temperature range *1 mW ˚C ˚C ˚C *4 V not however exceed Pd. *12 Do in done at 10.4mW/˚C for operating above Ta=25˚C *3 Derating in done at 16mW/˚C for operating above Ta=25˚C *4 Derating Bias voltage in 200msec(tr≥1msec). * Recommended Operating Conditions (Ta=25˚C) Parameter Symbol Min. Typ. Max. Unit VCC Io VOUT 4.0 - 3.0 - 25.0 1.0 15 V A V Input voltage Output current Output voltage Electrical Characteristics (Unless otherwise specified, Ta=25˚C, Vcc=10V, Io=500mA, R1=2.2kΩ, R2=6.8kΩ) Parameter Shut down current Bias current Symbol Min. Isd - 0 10 µA VCTL=0V Ib - 2.5 5.0 mA VCTL=2V, Io=0mA C pin voltage Vc 1.200 1.225 1.250 V Output voltage Dropout voltage Vo - 5.00 - V ∆Vd - 0.3 0.5 V Io 1.0 - - A Ripple rejection R.R. 45 55 - dB f=120Hz, ein=1Vrms, Io=100mA Line regulation Reg.I - 20 100 mV Vcc=6 → 25V Reg.L - 50 150 mV Io=5mA → 1A Tcvo - ±0.02 - IOS - 0.40 - A Vcc=25V ON mode level VthH - V ACTIVE MODE, Io=0mA VthL 2.0 - - OFF mode level - 0.8 V OFF MODE, Io=0mA Input high current ICTL 100 200 300 µA Peak output current Load regulation * Temperature coefficient of output voltage Short circuit output current Typ. Max. Unit Conditions Io=50mA Vcc=0.95Vo % / °C Io=5mA, Tj=0~125°C VCTL=5V, Io=0mA * Designed Guarantee.(Outgoing inspection is not done all products.) Application Circuit [BA00CC0WT(-V5)] [BA00CC0WFP] BA00CC0WT(-V5) Fin BA00CC0WFP GND Vcc Vref OVP 1 CTL 2 Vcc TSD 3 GND OCP 0.33µF 4 OUT + Driver OVP 5 C R2 Vcc Vcc Vref Driver 22µF 1 CTL 2 Vcc TSD 3 N.C. OCP 4 OUT 5 R2 R1 Vcc 0.33µF + 22µF C R1