440 440-074 EMI/RFI Banding Adapter Direct Coupling - Standard Profile 440 F S 074 NF 16 12-8 K P CONNECTOR DESIGNATORS * A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 DIRECT COUPLING Product Series Polysulfide (Omit for none) Connector Designator B = Band K = Precoiled Band (Omit for none) Angle and Profile H = 45 J = 90 S = Straight Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Basic Part No. Cable Entry (Table V) Finish (Table II) Shell Size (Table I) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) Length * A Thread (Table I) B (Table I) * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) K* STYLE 2 (STRAIGHT See Note 1) L* * (Table V) .060 (1.5) Typ. .380 (9.7) Typ. J J (Table III) E (Table III) (Table IV) B (Table I) F (Table IV) G (Table IV) B (Table I) H (Table IV) Termination Area Free of Cadmium. Knurl or Ridges Mfr's Option Polysulfide Stripes P Option © 2005 Glenair, Inc. Band Option (K Option Shown See Note 6) CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 50 www.glenair.com 440 440-074 EMI/RFI Banding Adapter Direct Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE V: CABLE ENTRY K L Dash Dia Dia No. .125 (3.2) .250 (6.4) 02 .188 (4.8) .312 (7.9) 03 .250 (6.4) .375 (9.5) 04 .312 (7.9) .438 (11.1) 05 .375 (9.5) .500 (12.7) 06 .438 (11.1) .562 (14.3) 07 .500 (12.7) .625 (15.9) 08 .562 (14.3) .688 (17.5) 09 .625 (15.9) .750 (19.1) 10 .688 (17.5) .812 (20.6) 11 .750 (19.1) .875 (22.2) 12 .812 (20.6) .938 (23.8) 13 .875 (22.2) 1.000 (25.4) 14 .938 (23.8) 1.062 (27.0) 15 16 1.000 (25.4) 1.125 (28.6) 17 1.062 (27.0) 1.188 (30.2) 18 1.125 (28.6) 1.250 (31.8) 20 1.250 (31.8) 1.375 (34.9) 22 1.375 (34.9) 1.500 (38.1) 24 1.500 (38.1) 1.625 (41.3) © 2005 Glenair, Inc. TABLE IV: ELBOW DIMENSIONS F Elbow E G Max Size Max Max 02 .639 (16.2) .890 (22.6) .750 (19.1) 03 .664 (16.9) .920 (23.4) .810 (20.6) 04 .688 (17.5) .940 (23.9) .870 (22.1) 05 .688 (17.5) .940 (23.9) .870 (22.1) 06 .688 (17.5) .940 (23.9) .870 (22.1) 07 .705 (17.9) .970 (24.6) .920 (23.4) 08 .732 (18.6) .990 (25.1) .980 (24.9) 09 .732 (18.6) .990 (25.1) .980 (24.9) 10 .748 (19.0) 1.000 (25.4) 1.020 (25.9) 11 .773 (19.6) 1.020 (25.9) 1.080 (27.4) 12 .773 (19.6) 1.020 (25.9) 1.080 (27.4) 13 .800 (20.3) 1.060 (26.9) 1.140 (29.0) 14 .800 (20.3) 1.060 (26.9) 1.140 (29.0) 15 .823 (20.9) 1.090 (27.7) 1.200 (30.5) 16 .823 (20.9) 1.090 (27.7) 1.200 (30.5) H Max 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.120 (28.4) 1.120 (28.4) 1.190 (30.2) 1.250 (31.8) 1.250 (31.8) 1.270 (32.3) 1.330 (33.8) 1.330 (33.8) 1.410 (35.8) 1.410 (35.8) 1.480 (37.6) 1.480 (37.6) 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. 6. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 51 www.glenair.com