62 620-006 Split Strain Reliefs Rotatable Coupling - Straight and 90° 620 H S 006 M 15 CONNECTOR DESIGNATOR Product Series Shell Size (Table III) A-F-H-L Connector Designator Finish (Table II) ROTATABLE COUPLING Angle and Profile S= Straight A = 90° Basic Part No. A Thread (Table I) H E (Table III) Wire Feedthrough Slot C (Table I) A Thread (Table I) F (Table III) K G G C (Table I) J © 20053 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 62 - Page 10 62 620-006 Split Strain Reliefs Rotatable Coupling - Straight and 90° Shell Size Conn. Desig. A,F,L H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 E Max .602 (15.3) .712 (18.1) .837 (21.3) .837 (21.3) .962 (24.4) 1.212 (30.8) 1.337 (34.0) 1.462 (37.1) 1.587 (40.3) 1.731 (44.0) F Nom .752 (19.1) .832 (21.1) .988 (25.1) 1.046 (26.6) 1.319 (33.5) 1.451 (36.9) 1.557 (39.5) 1.653 (42.0) 1.775 (45.1)) 2.020 (51.3) TABLE III: CABLE ENTRY H Cable Entry G Min Closed Open .125 (3.2) .125 (3.2) .204 (5.2) .125 (3.2) .187 (4.7) .286 (7.3) .188 (4.8) .291 (7.4) .416 (10.6) .188 (4.8) .351 (8.9) .476 (12.1) .188 (4.8) .501 (12.7) .625 (15.9) .250 (6.4) .578 (14.7) .706 (17.9) .250 (6.4) .581 (14.8) .831 (21.1) .312 (7.9) .644 (16.4) .956 (24.3) .312 (7.9) .706 (17.9) 1.081 (27.5) .312 (7.9) .750 (19.1) 1.187 (30.1) J Max .808 (20.3) .867 (22.0) .929 (23.6) .992 (25.2) 1.056 (26.8) 1.233 (31.3) 1.296 (32.9) 1.358 (34.5) 1.420 (36.1) 1.634 (41.5) K Max .704 (17.9) .786 (20.0) .979 (24.9) 1.039 (26.4) 1.188 (30.2) 1.300 (33.0) 1.425 (36.2) 1.550 (39.4) 1.675 (42.5) 1.813 (46.1) 1. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 62 - Page 11