62 620-054 Strain Relief Direct Coupling - Straight 620 F S 054 M 16 CONNECTOR DESIGNATOR F DIRECT COUPLING Product Series Shell Size (Table III) Connector Designator Finish (Table II) Angle and Profile S = Straight Basic Part No. E (Table III) A Thread (Table I) Bushing G Max Closed (Table III) F (Table III) B (Table I) H (Table III) See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08 10 12 14 16 18 20 22 24 E Max 1.078 (27.4) 1.078 (27.4) 1.078 (27.4) 1.312 (33.3) 1.312 (33.3) 1.312 (33.3) 1.312 (33.3) 1.453 (36.9) 1.375 (34.9) TABLE III: CABLE ENTRY G F Max Closed Dia Free .187 (4.7) .125 (3.2) .187 (4.7) .188 (4.8) .281 (7.1) .312 (7.9) .325 (8.3) .375 (9.5) .356 (9.0) .500 (12.7) .456 (11.6) .625 (15.9) .519 (13.2) .625 (15.9) .519 (13.2) .750 (19.1) .657 (16.7) .800 (20.3) H Max .828 (21.0) .891 (22.6) 1.016 (25.8) 1.141 (29.0) 1.203 (30.6) 1.469 (37.3) 1.469 (37.3) 1.656 (42.1) 1.750 (44.5) 1. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 62 - Page 19