62 620-046 Strain Relief Rotatable Coupling - Straight and 90° 620 A S 046 M 16 D CONNECTOR DESIGNATOR Product Series Drain Hole Option - 90 only (Omit for None) Connector Designator A Shell Size (Table III) Angle and Profile S = Straight A = 90 ROTATABLE COUPLING Finish (Table II) Basic Part No. A Thread (Table I) Cable Entry E (Table III) See inside back cover fold-out or pages 13 and 14 for Tables I and II. F (Table III) C (Table I) G (Table III) A Thread (Table I) 1. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 2. Metric dimensions (mm) are indicated in H (Table III) parentheses. Drain Holes, 4 Places, 90° Apart C (Table I) H (Table III) Cable Entry Shell Size 08 10 12 14 16 18 20 22 24 28 32 36 40 E Max .630 (16.0) .740 (18.8) .860 (21.8) .860 (21.8) .990 (25.1) 1.240 (31.5) 1.360 (34.5) 1.490 (38.0) 1.610 (40.9) 1.760 (44.7) 1.950 (49.5) 2.330 (59.2) 2.510 (63.8) © 2005 Glenair, Inc. F (Table III) TABLE III: CABLE ENTRY G H F Max Max Max .780 (19.8) .808 (20.5) .782 (19.9) .861 (21.9) .867 (22.0) .862 (21.9) .929 (23.6) 1.003 (25.5) 1.050 (26.7) .992 (25.2) 1.061 (26.9) 1.110 (29.0) 1.334 (33.9) 1.260 (32.0) 1.056 (26.8) 1.466 (37.2) 1.370 (34.8) 1.233 (31.3) 1.572 (39.9) 1.500 (38.1) 1.296 (32.9) 1.688 (42.9) 1.620 (41.1) 1.358 (34.5) 1.790 (45.5) 1.750 (44.5) 1.420 (36.1) 2.035 (51.7) 1.890 (58.0) 1.634 (41.5) 2.386 (60.6) 1.950 (49.5) 1.859 (47.2) 2.496 (63.4) 2.070 (52.6) 1.984 (50.4) 2.566 (65.2) 2.200 (55.9) 2.109 (53.6) CAGE Code 06324 Cable Entry Closed Open .125 (3.2) .204 (5.2) .187 (4.7) .286 (7.3) .416 (10.6) .291 (7.4) .351 (8.9) .476 (12.1) .501 (12.7) .626 (15.9) .518 (13.2) .706 (17.9) .581 (14.8) .831 (21.1) .956 (24.3) .644 (16.4) .706 (17.9) 1.081 (27.5) .750 (19.1) 1.187 (30.1) .875 (22.2) 1.250 (31.8) .938 (23.8) 1.375 (34.9) 1.500 (38.1) .938 (23.8) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 62 - Page 5