www.make-ps.com E-mail:[email protected] 2000WFR series Single Output DC/DC Converter FEATURES • • • • • • • Up to 89% Efficiency Single Output, 20 watt converter Available in 12, 24 and 48 VDC Inputs 2 - 1 Input Range Industry Standard 1.0” X 2.0” X 0.4” Package Remote On/Off, Short Circuit Protection 6 sided Continuous Shielding EMI complies with EN55022 Class A DESCRIPTIONS INPUT CHARACTERISTICS Delivering up to 20 watts in an industry standard 1" X 2" X 0.4" package this broad line of high density converters provide up to 25 watts/in3 saving valuable board space. Key to providing this high a power level in a 1" X 2" footprint is the outstanding thermal performance with efficiencies up to 89%. The 2000WFR series are available in 12Vdc, 24Vdc and 48Vdc input, with a 2 to 1 input range, and with single output modules of 3.3Vdc, 5Vdc, 12Vdc, 15Vdc making them one of the most versatile product lines available today in the market. They are ideally suited to data communications applications, mobile battery driven equipment, telecommunications equipment, mixed analog/digital subsystems and process/control systems. Min Typ Max Units/Comments Switching Frequency 290 330 360 kHz; Factory set Remote Shut Down Off -1 +1 VDC;Ref. to input ( - ) On 2.5 VDC or open;Referenced to input ( - ) Input - Output Capacitance pF 1200 Input Filter Pi type Isolation Voltage VDC 1500 Isolation Resistance MOhms @ 500 Vdc 1000 OUTPUT CHARACTERISTICS Output Voltage Set Point Line Regulation Load Regulation Temperature Coefficient Ripple/Noise Load Transient Response Short Circuit Protection Min Typ Max Unit/Comments ±1 % Output voltage at nominal line & FL ±0.3 % Output voltage measured from min. input line to maximum ±0.5 % Output voltage measured from FL to 10% load (Balanced Loads) ±0.02 % per degree C 60 100 mV p-p measured at 20 MHz bandwidth with external 1 μf capacitor ±4 % deviation of Vout voltage for a 25% load change for 300μS Indefinite, Automatic Recovery >> B-159 www.make-ps.com E-mail:[email protected] GENERAL CHARACTERISTICS Operating Temp. Range Min -40 Operating Temp. Range -40 Storage Temp. Range Material Flammability Relative Humidity -55 Typ 5 Weight Size Case Material Max Unit/Comments +50 °C; measured at ambient +105 °C; measured at case +125 ° C UL94V-0 % Humidity, non-condensing 95 30 Grams 1.0” X 2.0” X 0.4” Metal with non-conductive baseplate OUTLINE DRAWING 0.40 (10.2) 0.40 (10.2) 0.10 (2.5) 0.039 ±.002 (1.0 ±0.05) PIN DIA. TYP. 3 4 5 0.80 (20.3) BOTTOM VIEW 1 2 SIDE VIEW 2.00 (50.8) 6 0.60 (15.2) 0.40 (10.2) 0.40 (10.2) 1.00 (25.4) 0.24 (6.0) 0.40 (10.2) PIN OUT CHART Pins 1 2 3 4 5 6 FUNCTION + Vin - Vin + Vout NO PIN - Vout REMOTE ON/OFF Notes: 1. Unless otherwise specified dimensions are in inches (mm). Tolerances Inches mm X.XX = ±0.02 X.X = ±0.5 X.XXX= ±0.010 X.XX = ±0.25 All specifications are typical at nominal input, nominal load and 25° C unless otherwise specified. External, low ESR, 10 microfarad (minimum) capacitor across output is recommended for operation. >> B-160 www.make-ps.com E-mail:[email protected] HOW TO ORDER HOW TO ORDER 20 XX S XX - WFR - Y Wattage Output Voltage Single Output ROHS Compliant Series Nominal Input Voltage DERATING CURVES MODEL 2000WFR Single Pout % 100 90 80 70 60 50 40 30 20 10 0 -40 400LFM 100LFM Natural Convection 200LFM ~ 50 60 70 80 90 100 110 TEMPERATURE ° C MODEL SELECTION CHART Model 2003S12WFR 2005S12WFR 2012S12WFR 2015S12WFR 2003S24WFR 2005S24WFR 2012S24WFR 2015S24WFR 2003S48WFR 2005S48WFR 2012S48WFR 2015S48WFR Nominal Input Voltage (VDC) Input Voltage Range (VDC) Under Voltage Shut Down (VDC) No Load Input Current (mA) Full Load Input Current (mA) Output Voltage (VDC) Full Load Output Current (mA) 12 12 12 12 24 24 24 24 48 48 48 48 9 -18 9 -18 9 - 18 9 -18 18 - 36 18 - 36 18 - 36 18 - 36 36 - 75 36 - 75 36 - 75 36 - 75 8.1 - 8.8 8.1 - 8.8 8.1 - 8.8 8.1 - 8.8 16 - 17.5 16 - 17.5 16 - 17.5 16 - 17.5 32 - 34 32 - 34 32 - 34 32 - 34 30 30 30 30 17 17 17 17 10 10 10 10 1358 1984 1898 1903 671 980 938 941 335 490 469 471 3.3 5.0 12.0 15.0 3.3 5.0 12.0 15.0 3.3 5.0 12.0 15.0 4.00 4.00 1.67 1.34 4.00 4.00 1.67 1.34 4.00 4.00 1.67 1.34 Input Fuse Efficiency Slow Blow @ FL Type (%) (A) 4 4 4 4 2 2 2 2 1 1 1 1 81 84 88 88 82 85 89 89 82 85 89 89 >> B-161 www.make-ps.com E-mail:[email protected] 2000WFR series Dual Output DC/DC Converter NEW FEATURES • • • • • • • Up to 89% Efficiency Dual Output, 20 watt converter Available in 12, 24 and 48 VDC Inputs 2-1 Input Range Industry Standard 1.0” X 2.0” X 0.4” Package Remote On/Off, Short Circuit Protection 6 sided Continuous Shielding EMI complies with EN55022 Level A DESCRIPTIONS INPUT CHARACTERISTICS Delivering up to 20 watts in an industry standard 1" X 2" X 0.4" package this broad line of high density converters provide up to 25 watts/in3 saving valuable board space. Key to providing this high a power level in a 1" X 2" footprint is the outstanding thermal performance with efficiencies up to 89%. The 2000WFR series are available in 12Vdc, 24Vdc and 48Vdc input, with a 2 to 1 input range, and with dual output modules of +/-12Vdc, +/-15Vdc making them one of the most versatile product lines available today in the market. They are ideally suited to data communications applications, mobile battery driven equipment, telecommunications equipment, mixed analog/ digital subsystems and process/control systems. Min Typ Max Units/Comments Switching Frequency 290 330 360 kHz; Factory set Remote Shut Down Off -1 +1 VDC;Ref. to input ( - ) On 2.5 VDC or open;Referenced to input ( - ) Input - Output Capacitance pF 1200 Input Filter Pi type Isolation Voltage VDC 1500 Isolation Resistance MOhms @ 500 Vdc 1000 OUTPUT CHARACTERISTICS Output Voltage Set Point Line Regulation Load Regulation Temperature Coefficient Ripple/Noise Short Circuit Protection Ouptut Voltage Balance Min Typ Max Unit/Comments ±1 % Output voltage at nominal line & FL ±0.3 % Output voltage measured from min. input line to maximum ±0.5 % Output voltage measured from FL to 10% load (Balanced Loads) ±0.02 % per degree C 60 100 mV p-p measured at 20 MHz bandwidth with external 1 μf capacitor Indefinite, Automatic Recovery ±2 %, Balanced Load >> B-162 www.make-ps.com E-mail:[email protected] GENERAL CHARACTERISTICS Operating Temp. Range Min -40 Operating Temp. Range -40 Storage Temp. Range Material Flammability Relative Humidity -55 Max Unit/Comments +50 °C; measured at ambient +105 °C; measure at case +125 °C; UL94V-0 % Humidity, 95 non-condensing 30 Grams 1.0” X 2.0” X 0.4” Metal with nonconductive baseplate Typ 5 Weight Size Case Material OUTLINE DRAWING 0.40 (10.2) 0.40 (10.2) 0.10 (2.5) 0.039 ±.002 (1.0 ±0.05) PIN DIA. TYP. 3 4 5 0.80 (20.3) BOTTOM VIEW 1 2 SIDE VIEW 2.00 (50.8) 6 0.60 (15.2) 0.40 (10.2) 0.40 (10.2) 1.00 (25.4) 0.24 (6.0) 0.40 (10.2) PIN OUT CHART Pins 1 2 3 4 5 6 FUNCTION + Vin - Vin + Vout COMMON - Vout REMOTE ON/OFF Notes: 1. Unless otherwise specified dimensions are in inches (mm). Tolerances Inches mm X.XX = ±0.02 X.X = ±0.5 X.XXX= ±0.010 X.XX = ±0.25 All specifications are typical at nominal input, nominal load and 25° C unless otherwise specified. External, low ESR, 10 microfarad (minimum) capacitor across output is recommended for operation. >> B-163 www.make-ps.com E-mail:[email protected] HOW TO ORDER HOW TO ORDER 20 XX D XX - WFR - Y Wattage Output Voltage Dual Output ROHS Compliant Series Nominal Input Voltage DERATING CURVES MODEL 2000WFR Dual Pout % 100 90 80 70 60 50 40 30 20 10 0 -40 100LFM 400LFM Natural Convection 200LFM ~ 50 60 70 80 90 100 110 TEMPERATURE ° C MODEL SELECTION CHART Model 2012D12WFR 2015D12WFR 2012D24WFR 2015D24WFR 2012D48WFR 2015D48WFR Nominal Input Voltage (VDC) Input Voltage Range (VDC) Under Voltage Shut Down (VDC) No Load Input Current (mA) Full Load Input Current (mA) Output Voltage (VDC) Full Load Output Current (mA) 12 12 24 24 48 48 9 - 18 9 - 18 18 - 36 18 - 36 36 - 75 36 - 75 8.1 - 8.8 8.1 - 8.8 16 - 17.5 16 - 17.5 32 - 34 32 - 34 30 30 17 17 10 10 1.92 1.92 0.96 0.96 0.47 0.47 ±12.0 ±15.0 ±12.0 ±15.0 ±12.0 ±15.0 ±0.835 ±0.670 ±0.835 ±0.670 ±0.835 ±0.670 Input Fuse Efficiency Slow Blow @ FL Type (%) (A) 4 4 2 2 1 1 88 88 89 89 89 89 >> B-164