440 440-001 EMI/RFI Crimp Ring Adapter Direct Coupling - Split Shell 440 F D 001 M 16 32 CONNECTOR DESIGNATORS * A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 4 Product Series Cable Entry (Table V) Connector Designator Shell Size (Table I) Angle and Profile D = Split 90 F = Split 45 Finish (Table II) Basic Part No. DIRECT COUPLING A Thread (Table I) J J E G (Table III) (Table IV) (Table III) (Table IV) F (Table IV) B Typ. (Table I) K* Split 90° Split 45° N* H (Table IV) L* M* P* R* * (Table V) Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) © 2005 Glenair, Inc. See inside back cover fold-out or pages 13 and 14 for Tables I and II. 1. For proper installation of crimp ring, use Thomas & Betts (or equivalent) installation dies listed (Table V) for each dash no. 2. Metric dimensions (mm) are indicated in parentheses. 3. Dimensions shown are not intended for inspection criteria. 4. When using Connector Designator B refer to pages 18 and 19 for part number development. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 440 - Page 10 440 440-001 EMI/RFI Crimp Ring Adapter Direct Coupling - Split Shell Dash No.'s (Table V) 06-23 26-30 31-32 33 34 35 36 38-39 TABLE IV: ELBOW DIMENSIONS E F G Max Max Max .440 (11.2) 1.402 (35.6) .680 (17.3) .500 (12.7) 1.462 (37.1) .750 (19.1) .560 (14.2) 1.820 (46.2) .810 (20.6) .620 (15.7) 1.850 (47.0) .870 (22.1) .680 (17.3) 1.950 (49.5) .930 (23.6) .820 (20.8) 2.070 (52.6) 1.060 (26.9) .880 (22.4) 2.130 (54.1) 1.120 (28.4) .940 (23.9) 2.190 (55.6) 1.180 (30.0) H Max 1.342 (34.1) 1.402 (35.6) 1.760 (44.7) 1.790 (45.5) 1.890 (48.0) 2.010 (51.1) 2.070 (52.6) 2.130 (54.1) TABLE V: CABLE ENTRY Dash No. 06 10 13 16 20 23 26 29 30 31 32 33 34 35 36 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 K Nom .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) © 2005 Glenair, Inc. L Nom .090 (2.3) .124 (3.1) .149 (3.8) .175 (4.4) .219 (5.6) .250 (6.4) .275 (7.0) .297 (7.5) .312 (7.9) .375 (9.5) .430 (10.9) .550 (14.0) .670 (17.0) .810 (20.6) .920 (23.4) 1.040 (26.4) 1.122 (28.5) 1.224 (31.1) 1.353 (34.4) 1.425 (36.2) 1.550 (39.4) 1.675 (42.5) 1.800 (45.7) 1.925 (48.9) 2.050 (52.1) 2.175 (55.2) 2.300 (58.4) 2.425 (61.6) 2.530 (64.3) 2.655 (67.4) 2.780 (70.6) 2.905 (73.8) M Nom .113 (2.9) .145 (3.7) .179 (4.5) .215 (5.5) .250 (6.4) .281 (7.1) .306 (7.8) .335 (8.5) .365 (9.3) .406 (10.3) .500 (12.7) .620 (15.7) .750 (19.1) .880 (22.4) 1.000 (25.4) 1.120 (28.4) 1.192 (30.3) 1.294 (32.9) 1.423 (36.1) 1.545 (39.2) 1.670 (42.4) 1.795 (45.6) 1.920 (48.8) 2.045 (51.9) 2.170 (55.1) 2.295 (58.3) 2.420 (61.5) 2.545 (64.6) 2.670 (67.8) 2.795 (71.0) 2.920 (74.2) 3.045 (77.3) N Nom .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) .440 (11.2) P Nom .156 (4.0) .187 (4.7) .225 (5.7) .261 (6.6) .297 (7.5) .327 (8.3) .375 (9.5) .405 (10.3) .425 (10.8) .500 (12.7) .590 (15.0) .710 (18.0) .840 (21.3) 1.010 (25.7) 1.130 (28.7) 1.250 (31.8) 1.332 (33.8) 1.440 (36.6) 1.562 (39.7) 1.670 (42.4) 1.795 (45.6) 1.920 (48.8) 2.045 (51.9) 2.170 (55.1) 2.295 (58.3) 2.420 (61.5) 2.545 (64.6) 2.670 (67.8) 2.795 (71.0) 2.920 (74.2) 3.045 (77.3) 3.170 (80.5) CAGE Code 06324 R Nom .194 (4.9) .227 (5.8) .256 (6.5) .297 (7.5) .335 (8.5) .372 (9.4) .406 (10.3) .453 (11.5) .473 (12.0) .560 (14.2) .670 (17.0) .790 (20.1) .920 (23.4) 1.090 (27.7) 1.210 (30.7) 1.330 (33.8) 1.412 (35.9) 1.520 (38.6) 1.643 (41.7) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) 2.250 (57.2) 2.375 (60.3) 2.500 (63.5) 2.625 (66.7) 2.750 (69.9) 2.875 (73.0) 3.000 (76.2) 3.125 (79.4) 3.250 (82.6) Color Code (Ref.) Yellow Orange Purple Yellow Green Tin Yellow Red Tin Green Red Blue Gray Brown Green Pink Orange Purple Yellow Red Blue Gray Brown Green Pink Orange Purple Yellow Red Blue Gray Brown Inst. Tool Die No. (Note 2) WT402 WT406 WT409 WT411 WT414 WT416 WT440/5451 WT440/5452 WT440/5454 WT440/5457 GS590 GS710 GS840 GS1010 GS1130 GS1250 GS1332 GS1440 GS1563 GS1670 GS1795 GS1920 GS2045 GS2170 GS2295 GS2420 GS2545 GS2670 GS2795 GS2920 GS3045 GS3170 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 440 - Page 11