001-79602

Cypress Semiconductor Corporation
198 Champion Court
San Jose, CA 95134
May 10, 2011
Dear Cypress Customer,
This is to declare that the test results summarized on the attached report
are valid for 5 years from the report date. In other words, the data
reported shall remain the same until November 03, 2015.
Should there by any changes in the RoHS compliance status of the
material mentioned in the report prior to this date, Cypress will reconduct testing and post an updated copy of the report with the latest
results. In the absence of any changes during the 5 year validity period,
the original test results can be leveraged for RoHS compliance
purposes.
Customers will be notified to changes in form, fit or function (e.g.,
assembly material set or location) via Cypress’s Product Change Notice
(PCN) policy, which is in accordance with the JESD-46 standard.
Please feel free to contact us if you have any questions. Inquiries may
be submitted online, via the MyCases portal located on the Cypress web
at URL www.cypress.com/myaccount.
Ashwin Varma
Quality Assurance Manager
+1 (408) 943-2600
www.cypress.com/myaccount
2 01 0.1 1.0 3
:11
+08 :00
Validity unknown
For Question,
Please Contact with SGS
www.tw.sgs.com
Test Report
No. : CE/2010/A5145
Date : 2010/11/03
Page : 1 of 4
HENKEL CORPORATION
HENKEL ADHESIVES-ELECTRONICS MAIN OFFICE: 14000 JAMBOREE ROAD, IRVINE,
CALIFORNIA, 92606 U.S.A
*CE/2010/A5145*
The following sample(s) was/were submitted and identified by/on behalf of the client as :
Sample Description
Style/Item No.
Sample Receiving Date
Testing Period
:
:
:
:
ADHESIVE
2000B
2010/10/28
2010/10/28 TO 2010/11/03
============================================================================================
Test Result(s)
:
Please refer to next page(s).
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the
Company.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and,
for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration,
forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.




 

Test Report
No. : CE/2010/A5145
Date : 2010/11/03
Page : 2 of 4
HENKEL CORPORATION
HENKEL ADHESIVES-ELECTRONICS MAIN OFFICE: 14000 JAMBOREE ROAD, IRVINE,
CALIFORNIA, 92606 U.S.A
*CE/2010/A5145*
Test Result(s)
PART NAME No.1
Test Item (s):
:
Unit
SILVER COLORED PASTE
Method
Halogen
Halogen-Fluorine (F) (CAS No.:
014762-94-8)
Halogen-Chlorine (Cl) (CAS No.:
022537-15-1)
Halogen-Bromine (Br) (CAS No.:
010097-32-2)
mg/kg
With reference to BS EN 14582:2007.
Analysis was performed by IC.
Halogen-Iodine (I) (CAS No.:
014362-44-8)
Note
MDL
Result
No.1
50
n.d.
50
n.d.
50
n.d.
50
n.d.
1. mg/kg = ppm; 0.1wt% = 1000ppm
2. n.d. = Not Detected
3. MDL = Method Detection Limit
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the
Company.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and,
for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration,
forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.




 

Test Report
No. : CE/2010/A5145
Date : 2010/11/03
Page : 3 of 4
HENKEL CORPORATION
HENKEL ADHESIVES-ELECTRONICS MAIN OFFICE: 14000 JAMBOREE ROAD, IRVINE,
CALIFORNIA, 92606 U.S.A
*CE/2010/A5145*
Analytical flow chart of halogen content
1) Name of the person who made measurement: Rita Chen
2) Name of the person in charge of measurement: Troy Chang
Sample pretreatment / Separation
Weighting and putting sample in cell
Oxygen Bomb Combustion / Absorption
Dilution to fixed volume
Analysis was performed by IC
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the
Company.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and,
for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration,
forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.




 

Test Report
No. : CE/2010/A5145
Date : 2010/11/03
Page : 4 of 4
HENKEL CORPORATION
HENKEL ADHESIVES-ELECTRONICS MAIN OFFICE: 14000 JAMBOREE ROAD, IRVINE,
CALIFORNIA, 92606 U.S.A
*CE/2010/A5145*
** End of Report **
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the
Company.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and,
for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration,
forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.




 
