Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134 April 21, 2011 Dear Cypress Customer, This is to declare that the test results summarized on the attached report are valid for 5 years from the report date. In other words, the data reported shall remain the same until April 21, 2016. Should there by any changes in the RoHS compliance status of the material mentioned in the report prior to this date, Cypress will reconduct testing and post an updated copy of the report with the latest results. In the absence of any changes during the 5 year validity period, the original test results can be leveraged for RoHS compliance purposes. Customers will be notified to changes in form, fit or function (e.g., assembly material set or location) via Cypress’s Product Change Notice (PCN) policy, which is in accordance with the JESD-46 standard. Please feel free to contact us if you have any questions. Inquiries may be submitted online, via the MyCases portal located on the Cypress web at URL www.cypress.com/myaccount. Ashwin Varma Quality Assurance Manager +1 (408) 943-2600 www.cypress.com/myaccount 2 01 1 .04 .2 1 80 : 3 CST Validity unknown For Question, Please Contact with SGS www.tw.sgs.com Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 1 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) The following sample(s) was/were submitted and identified by/on behalf of the client as: Sample Description Sample Receiving Date Testing Period : YIZBOND-9246 : 2011/04/15 : 2011/04/15 TO 2011/04/21 ============================================================================================ Test Result(s) : Please refer to next page(s). Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 2 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) Test Result(s) PART NAME No.1 SILVER COLORED PASTE Unit Method MDL Cadmium (Cd) mg/kg With reference to IEC 62321: 2008 and performed by ICP-AES. 2 Result No.1 n.d. Lead (Pb) mg/kg With reference to IEC 62321: 2008 and performed by ICP-AES. 2 n.d. Mercury (Hg) mg/kg With reference to IEC 62321: 2008 and performed by ICP-AES. 2 n.d. Hexavalent Chromium Cr(VI) by alkaline extraction mg/kg With reference to IEC 62321: 2008 and performed by UV-VIS. 2 n.d. Antimony (Sb) mg/kg 2 n.d. Antimony trioxide (Sb2O3) (#) (CAS No.: 1309-64-4) mg/kg With reference to US EPA Method 3050B for Antimony Content. Analysis was performed by ICP-AES. With reference to US EPA Method 3050B for Antimony Content. Analysis was performed by ICP-AES. Analysis was performed by PyrolyzerGC/MS. - n.d. - Negative Test Item (s): Red phosphorus ** Perfluorooctane sulfonates (PFOS) PFOS – Acid PFOS – Metal Salt PFOS – Amide PFOA (CAS No.: 335-67-1) mg/kg With reference to US EPA 3540C: 1996 method for PFOS Content. Analysis was performed by LC/MS. 10 n.d. mg/kg 10 n.d. Hexabromocyclododecane (HBCDD) (CAS No.: 25637-99-4) mg/kg With reference to US EPA 3540C: 1996 method for PFOA Content. Analysis was performed by LC/MS. With reference to US EPA 3540C method. Analysis was performed by GC/MS. With reference to EN 14372. Analysis was performed by GC/MS. 5 n.d. 0.003 n.d. BBP (Benzyl butyl phthalate) (CAS No.: 85-68-7) % Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 3 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) Test Item (s): Unit DBP (Dibutyl phthalate) (CAS No.: 84-74-2) % With reference to EN 14372. Analysis was performed by GC/MS. 0.003 Result No.1 n.d. DEHP (Di- (2-ethylhexyl) phthalate) (CAS No.: 117-81-7) % With reference to EN 14372. Analysis was performed by GC/MS. 0.003 n.d. 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. Sum of PBBs Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Sum of PBDEs Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether Halogen Halogen-Fluorine (F) (CAS No.: 14762-94-8) Halogen-Chlorine (Cl) (CAS No.: 22537-15-1) mg/kg Method With reference to IEC 62321: 2008 and performed by GC/MS. MDL mg/kg With reference to BS EN 14582:2007. Analysis was performed by IC. 50 n.d. mg/kg With reference to BS EN 14582:2007. Analysis was performed by IC. 50 158 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 4 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) Halogen-Bromine (Br) (CAS No.: 10097-32-2) mg/kg With reference to BS EN 14582:2007. Analysis was performed by IC. 50 Result No.1 n.d. Halogen-Iodine (I) (CAS No.: 14362-44-8) mg/kg With reference to BS EN 14582:2007. Analysis was performed by IC. 50 n.d. Test Item (s): Note 1. 2. 3. 4. 5. 6. 7. Unit Method MDL mg/kg = ppm 0.1wt% = 1000ppm n.d. = Not Detected MDL = Method Detection Limit " - " = Not Regulated ** = Qualitative analysis (No Unit) Negative = Undetectable / Positive = Detectable (#): The substance was calculated by the test result of Antimony. The MDL was evaluated for Antimony. AX A×F AX Antimony trioxide (Sb2O3) A F Antimony 1.1971 PFOS Reference Information : Directive 2006/122/EC (1) May not be placed on the market or used as a substance or constituent of preparations in a concentration equal to or higher than 0.005 % by mass. (2) May not be placed on the market in semi-finished products or articles, or parts thereof, if the concentration of PFOS is equal to or higher than 0.1 % by mass calculated with reference to the mass of structurally or microstructurally distinct parts that contain PFOS or, for textiles or other coated materials, if the amount of PFOS is equal to or higher than 1µg/m2 of the coated material. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 5 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) 1) These samples were dissolved totally by pre-conditioning method according to below flow chart. 6+ Cr test method excluded 2) Name of the person who made measurement: Climbgreat Yang 3) Name of the person in charge of measurement: Troy Chang Cutting / Preparation Sample Measurement Cr6 Hg Pb Cd Acid digestion by suitable acid depended on different sample material (as below table) Microwave digestion with HNO3/HCl/HF Filtration Add appropriate amount of digestion reagent Heat to appropriate temperature to extract Residue Solution Cool, filter digestate 1) Alkali Fusion 2) HCl to dissolve ICP-AES Sample Material through filter Add diphenyl-carbazide for Digestion Acid color development Steel, copper, aluminum, solder Aqua regia, HNO 3, HCl, HF, H2O2 Glass HNO 3/HF measure the absorbance Gold, platinum, palladium, ceramic Aqua regia at 540 nm by UV-VIS Silver HNO 3 Plastic H 2SO4, H2O2, HNO 3, HCl Others Any acid to total digestion Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 6 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) Analytical flow chart 1) Name of the person who made measurement: Roman Wong 2) Name of the person in charge of measurement: Troy Chang Test Items: PBB/PBDE, TBBP-A-bis First testing process Optional screen process Confirmation process Sample Sample pretreatment Screen analysis Sample extraction method Concentrate/Dilute Extracted solution Filter Analysis by GC/MS Issue Report Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 7 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) Analytical flow chart of Soxhlet extraction (LC/MS) procedure 1) Name of the person who made measurement: Roman Wong 2) Name of the person in charge of measurement: Shinjyh Chen Test Items: PFOS/PFOA Benzotriazole Sample pretreatment/separation Sample extraction by soxhlet method Concentrate/Dilute Extracted solution Analysis was performed by LC/MS Data Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 8 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) 1) These samples were dissolved totally by pre-conditioning method according to below flow chart. 2) Name of the person who made measurement: Climbgreat Yang 3) Name of the person in charge of measurement: Troy Chang Flow Chart of digestion for the elements analysis performed by ICP-AES Cutting / Preparation Sample Measurement Acid digestion by suitable acid depended on different sample material (as below table) Filtration Residue Solution 1) Alkali Fusion 2) HCl to dissolve ICP-AES Steel, copper, aluminum, solder Aqua regia, HNO3, HCl, HF, H2O2 Glass HNO 3/HF Gold, platinum, palladium, ceramic Aqua regia Silver HNO 3 Plastic H2SO4, H2O2, HNO3, HCl Others Any acid to total digestion Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 9 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) Analytical flow chart of halogen content 1) Name of the person who made measurement: Rita Chen 2) Name of the person in charge of measurement: Troy Chang Sample pretreatment / Separation Weighting and putting sample in cell Oxygen Bomb Combustion / Absorption Dilution to fixed volume Analysis was performed by IC Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 10 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) Analytical flow chart of Red phosphorus 1) Name of the person who made measurement: Ginny Chen 2) Name of the person in charge of measurement: Troy Chang Sample pretreatment Take sample and put it into sample cup Analysis was performed by py-GC/MS DATA Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 11 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) Analytical flow chart of Soxhlet extraction (GC/MS) procedure 1) Name of the person who made measurement: Roman Wong 2) Name of the person in charge of measurement: Shinjyh Chen Test Items: Phthalate Benzotriazole HBCDD NP DBBT Organic phosphorus compounds Sample pretreatment/separation Sample extraction by soxhlet method Concentrate/Dilute Extracted solution Analysis was performed by GC/MS Data Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report No. : CE/2011/43070 Date : 2011/4/21 Page : 12 of 12 YIZTECH CO., LTD. *CE/2011/43070* (YI-HUA ELECTRONIC MATERIALS CO., LTD.) NO. 24, ALLEY 125, LANE 238, GAOYANG S. RD., LONGTAN SHIANG, TAOYUAN COUNTY 325, TAIWAN (R. O. C.) (NO. 21, DONGSHENG ROAD, CHADONG VILLAGE, SHIJI TOWN, PANYU, GUANGZHOU, GUANGDONG, CHINA) ** End of Report ** Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.