Series 74 Convoluted Tubing 712-277 - Types C & F Straight, 45° & 90° EMI Environmental User-Installable Connector Fitting for Series 74 Helical Convoluted Tubing 712 F S 277 M 16 20 - 6 1 TYPES C&F Product Series Style 1 or 2 Length in 1/2 inch (12.7) increments (Example: 6 = 3.0 inches (76.2)) Conn. Designator A, D, F, H, L, or S (Pages F-3 to F-5) Dash No. (Table II) Angular Function: K = 45° L = 90° S = Straight Shell Size (Table I) Finish (Table III) Basic No. LENGTH ±.060 (1.52) LENGTH ± .060 (1.52) O-RING A THREAD (Page F-17) .945 (24.0) MAX (TYPICAL) C DIA (Page F-17) STYLE 2 (STRAIGHT) .88 (22.4) MAX TUBING I.D. (REF) STRAIGHT J DIA Wrench Flats G E 45° F STYLE 2 (45° & 90°) © 2003 Glenair, Inc. 90° 45° CAGE Codes 06324 H Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-20 Series 74 Convoluted Tubing 712-277 - Types C & F Straight, 45° & 90° EMI Environmental User-Installable Connector Fitting for Series 74 Helical Convoluted Tubing SHELL SIZE A,D,F,L,S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 -32 -36 -- DASH NO. 06 09 10 12 14 16 20 24 28 32 40 48 56 64 E MAX .639 (16.2) .664 (16.9) .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) 1.041 (26.4) 1.092 (27.7) 1.138 (28.9) TABLE I F MAX 1.23 (31.2) 1.26 (32.0) 1.28 (32.5) 1.31 (33.3) 1.33 (33.8) 1.34 (34.0) 1.36 (34.5) 1.40 (35.6) 1.43 (36.3) 1.60 (40.6) 1.64 (41.7) 1.69 (42.9) TABLE II TUBING I.D. MIN MAX .181 (4.6) .188 (4.8) .273 (6.9) .281 (7.1) .306 (7.8) .312 (7.9) .364 (9.2) .375 (9.5) .427 (10.8) .437 (11.1) .485 (12.3) .500 (12.7) .608 (15.4) .625 (15.9) .730 (18.4) .750 (19.1) .860 (21.8) .875 (22.2) .975 (24.8) 1.000 (25.4) 1.210 (30.6) 1.250 (31.8) 1.437 (36.5) 1.500 (38.1) 1.688 (42.9) 1.750 (44.5) 1.937 (49.2) 2.000 (50.8) TABLE III G MAX .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) 1.480 (37.6) 1.610 (40.9) 1.720 (43.7) H MAX 1.34 (34.0) 1.40 (35.6) 1.46 (37.1) 1.53 (38.9) 1.59 (40.4) 1.61 (40.9) 1.67 (42.4) 1.75 (44.5) 1.82 (46.2) 2.06 (52.3) 2.15 (54.6) 2.26 (57.4) J MAX 1.09 (27.7) 1.16 (29.5) 1.22 (31.0) 1.28 (32.5) 1.34 (34.0) 1.41 (35.8) 1.53 (38.9) 1.66 (42.2) 1.78 (45.2) 1.91 (48.5) 2.28 (57.9) 2.59 (65.8) 2.91 (73.9) 3.03 (77.0) NOTES: SYMBOL FINISH 1. O-Ring not supplied on connector designator A. B Olive Drab over Cadmium Plate J Gold Iridite over Cadmium Plate over Nickel M Electroless Nickel N Olive Drab over Cadmium Plate over Nickel NC Zinc-Cobalt, Olive Drab NF Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) T 2. Metric dimensions (mm) are in parentheses. 3. Tubing shown for reference only. 4. When tubing I.D. max exceeds inside diameter of connector shell, style 2 may be supplied. Refer to pages F-15 and F-16. Bright Dip Cadmium Plate over Nickel © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-21