Series 72 Series 72 Convoluted Tubing 710-004 Non-Environmental User-Installable Straight, 45° & 90° Connector Fittings for Series 72 Annular Convoluted Tubing 710 C A 004 M 16 16 TYPE A Product Series Dash No. (Table II) Connector Designator (C, D, E, J, or K) (Pages F-4 to F-6) Shell Size (Table I) Finish (Table III) Angle: A = 90° B = 45° S = Straight 2.875 (73.0) MAX A THREAD (Page F-17) Basic No. 2.250 (57.2) MAX B DIA (PAGE F-179) STRAIGHT STYLE 2 E MAX F H 45° J G 90° 45° K DIA L DIA TYP. © 2003 Glenair, Inc. Metric dimensions (mm) are indicated in parentheses. Tubing shown for reference only. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] E-12 Series 72 Convoluted Tubing 710-004 Non-Environmental User-Installable Straight, 45° & 90° Connector Fittings for Series 72 Annular Convoluted Tubing SHELL SIZE C,D,E,J or K 08 10/11 12/13 14/15 16/17 18 20 22 24 28 32 36 40 DASH NO. 09 12 16 20 24 28 32 40 F MAX 1.196 (30.4) 1.196 (30.4) 1.415 (35.9) 1.587 (40.3) 1.587 (40.3) 1.913 (48.6) 1.913 (48.6) 1.997 (50.7) TABLE I E DIMENSION MAX C CONN — — 1.735 (44.1) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) G MAX 1.780 (45.2) 1.780 (45.2) 1.895 (48.1) 2.065 (52.5) 2.065 (52.5) 2.175 (55.2) 2.175 (55.2) 2.345 (59.6) D,E,J, CONN 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) — — — — TABLE II H MAX 1.126 (28.6) 1.126 (28.6) 1.273 (32.3) 1.533 (38.9) 1.533 (38.9) 1.718 (43.6) 1.718 (43.6) 1.915 (48.6) K CONN 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.166 (29.6) 1.166 (29.6) 1.166 (29.6) 1.166 (29.6) 1.166 (29.6) 1.166 (29.6) 1.166 (29.6) 1.166 (29.6) 1.437 (36.5) J MAX 1.795 (45.6) 1.795 (45.6) 1.905 (48.4) 2.095 (53.2) 2.095 (53.2) 2.245 (57.0) 2.245 (57.0) 2.295 (58.3) K MAX .281 (7.1) .370 (9.4) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.250 (31.8) L DIA .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.438 (36.5) 1.625 (41.3) 1.750 (44.5) 2.000 (50.8) TABLE III SYMBOL FINISH B Olive Drab over Cadmium Plate J Gold Iridite over Cadmium Plate over Nickel M Electroless Nickel N Olive Drab over Cadmium Plate over Nickel NC Zinc-Cobalt, Olive Drab NF Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) T Bright Dip Cadmium Plate over Nickel Metric dimensions (mm) are indicated in parentheses. © 2003 Glenair, Inc. CAGE Codes 06324 When tubing I.D. max exceeds inside diameter of connector shell, style 2 will be supplied. Refer to pages F-15 and F-16. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] E-13