63 630-005 EMI/RFI Environmental G-Spring Bulkhead Fitting with Strain Relief Front and Rear Panel Mount - Straight 630 A 005 NF 16 2 G "G"-Spring EMI/RFI Shield Termination Product Series Strain Relief Style (G, F) Fitting Type A = Rear Mount B = Front Mount Fitting Style 1 = RFI/EMI Only 2 = RFI/EMI Environmental Basic Part No. Cable Entry (Table III) Finish (Table II) C Mounting Hole (Typ) .125 (3.2) Max Panel F* .960 (24.4) Max .690 (17.5) Max D Typ B Sq. * F Panel Cutout For Rear Mount .125 (3.2) Max Panel .960 (24.4) 1.220 (31.0) Max © 2005 Glenair, Inc. Style 1 RFI/EMI Front Mount Type B (Shown With Style G Gland Nut) Panel Ref .820 (20.8) 1.220 (31.0) Cable Range A Sq. 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring Bulkhead Fittings (see page 460-3) .400 (10.2) E Style 1 RFI/EMI Rear Mount Type A (Shown With Style F Strain Relief) G Panel Cutout For Front Mount B Sq. Panel Ref .820 (20.8) Max Style 2 RFI/EMI Environmental Rear Mount Type A (Shown With Style F Strain Relief) CAGE Code 06324 Style 2 RFI/EMI Environmental Front Mount Type B (Shown With Style F Strain Relief) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 63 - Page 4 www.glenair.com 63 630-005 EMI/RFI Environmental G-Spring Bulkhead Fitting with Strain Relief Front and Rear Panel Mount - Straight See inside back cover fold-out or page 14 for Table II. TABLE III: CABLE ENTRY Dash No. 01 02 03 04 05 06 07 08 09 10 11 Cable Range Min Max .156 (4.0) .250 (6.4) .188 (4.8) .375 (9.5) .250 (6.4) .438 (11.1) .280 (7.1) .500 (12.7) .375 (9.5) .625 (15.9) .500 (12.7) .750 (19.1) .625 (15.9) .875 (22.2) .750 (19.1) 1.000 (25.4) .875 (22.2) 1.125 (28.6) 1.000 (25.4) 1.250 (31.8) 1.125 (28.6) 1.375 (34.9) Dash No. 01 02 03 04 05 06 07 08 09 10 11 D Max .843 (21.4) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) 2.187 (55.5) A Max .885 (22.5) 1.104 (28.0) 1.197 (30.4) 1.291 (32.8) 1.385 (35.2) 1.635 (41.5) 1.760 (44.7) 2.010 (51.1) 2.260 (57.4) 2.510 (63.8) 2.760 (70.1) B Dim .593 (15.1) .812 (20.6) .906 (23.0) .968 (24.6) 1.062 (27.0) 1.250 (31.8) 1.375 (34.9) 1.562 (39.7) 1.750 (44.5) 1.938 (49.2) 2.125 (54.0) TABLE III (Continued) F E +.015 (+0.4) Max - 0 (-0.0) .625 (15.9) .515 (13.1) .750 (19.1) .640 (16.3) .875 (22.2) .765 (19.4) 1.000 (25.4) .890 (22.6) 1.125 (28.6) 1.015 (25.8) 1.250 (31.8) 1.140 (29.0) 1.375 (34.9) 1.265 (32.1) 1.500 (38.1) 1.390 (35.3) 1.625 (41.3) 1.515 (38.5) 1.750 (44.5) 1.640 (41.7) 1.875 (47.6) 1.765 (44.8) C +.015 (+0.4) - 0 (-0.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .147 (3.7) .147 (3.7) .173 (4.4) .173 (4.4) .173 (4.4) G +.031 (+0.8) - 0 (-0.0) .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. For proper termination, it is recommended that Glenair 469-001 Shield Support Ring (page 460-3) must be used on all assemblies. Place ring over wire and under shield; position under G-Spring. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 63 - Page 5 www.glenair.com