63 630-007 EMI/RFI Environmental Bulkhead Feed-Through with Strain Relief Front and Rear Jam Nut Mount - Straight 630 A 007 NF 16 2 A Single Overall EMI/RFI Shield Termination Product Series Strain Relief Style (H, A, M, D) Fitting Type A = Rear Mount B = Front Mount Fitting Style 1 = RFI/EMI Only 2 = Environmental Only 3 = RFI/EMI Environmental 4 = Non-RFI/EMI Non-Environmental 1. Metric dimensions (mm) are Basic Part No. indicated in parentheses. 2. Cable range is defined as the accommodations range for the Finish (Table II) wire bundle or cable. Dimensions shown are not intended for inspection criteria. Cable Entry (Table III) Length Max (Table III) .125 (3.2) Max Panel (Typ) C Length Max (Table III) A Thread (Table III) Type A Rear Mount Type A Rear Mount D Style 1 - RFI/EMI .410 (10.4) Max Length Max (Table III) .410 (10.4) Max B Style 3 - RFI/EMI Environmental Type B Front Mount Type B Front Mount Style 2 Environmental .125 (3.2) Max Panel (Typ) STYLE H Heavy Duty STYLE A Medium Duty E © 2005 Glenair, Inc. F Cable Range Style 4 - Non-RFI/EMI Non-Environmental STYLE M Medium Duty G Cable Range Length Max (Table III) STYLE D Medium Duty .135 (3.4) Max G H CAGE Code 06324 Cable Range H Cable Range J Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 63 - Page 8 www.glenair.com 63 630-007 EMI/RFI Environmental Bulkhead Feed-Through with Strain Relief Front and Rear Jam Nut Mount - Straight See inside back cover fold-out or page 14 for Table II. Dash No. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Style 1, 2, 4 3 1,2, 4 3 1, 2, 4 3 1,2, 4 3 1, 2, 4 3 1,2, 4 3 1, 2, 4 3 1,2, 4 3 1, 2, 4 3 1,2, 4 3 1, 2, 4 3 1,2, 4 3 Clamp Size 03* 03* 04* 04* 06* 06* 08 08 10 10 12 12 16 16 20 20 24 24 28 28 32* 32* 40* 40* TABLE III: CABLE ENTRY Cable Range Min Max .157 (4.0) .250 (6.4) .157 (4.0) .250 (6.4) .187 (4.7) .312 (7.9) .187 (4.7) .312 (7.9) .281 (7.1) .437 (11.1) .281 (7.1) .437 (11.1) .344 (8.7) .562 (14.3) .344 (8.7) .562 (14.3) .375 (9.5) .625 (15.9) .375 (9.5) .625 (15.9) .438 (11.1) .750 (19.1) .438 (11.1) .750 (19.1) .625 (15.9) .937 (23.8) .625 (15.9) .937 (23.8) .875 (22.2) 1.250 (31.8) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) 1.437 (36.5) 1.875 (47.6) 1.875 (47.6) 2.375 (60.3) 1.875 (47.6) 2.375 (60.3) A Thread Unified 1/2 -28 1/2 -28 5/8 -24 5/8 -24 3/4 -20 3/4 -20 7/8 -20 7/8 -20 1 -20 1 -20 1 3/16 -18 1 3/16 -18 1 7/16 -18 1 7/16 -18 1 3/4 -18 1 3/4 -18 2 -18 2 -18 2 1/4 -16 2 1/4 -16 2 1/2 -16 2 1/2 -16 3 -16 3 -16 B Dim .688 (17.5) .688 (17.5) .813 (20.7) .813 (20.7) .938 (23.8) .938 (23.8) 1.063 (27.0) 1.063 (27.0) 1.250 (31.8) 1.250 (31.8) 1.375 (34.9) 1.375 (34.9) 1.625 (41.3) 1.625 (41.3) 2.000 (50.8) 2.000 (50.8) 2.188 (55.6) 2.188 (55.6) 2.438 (61.9) 2.438 (61.9) 2.813 (71.5) 2.813 (71.5) 3.375 (85.7) 3.375 (85.7) C Flat ± .010 (± .3) .479 (12.2) .479 (12.2) .595 (15.1) .595 (15.1) .720 (18.3) .720 (18.3) .845 (21.5) .845 (21.5) .970 (24.6) .970 (24.6) 1.158 (29.4) 1.158 (29.4) 1.408 (35.8) 1.408 (35.8) 1.720 (43.7) 1.720 (43.7) 1.970 (50.0) 1.970 (50.0) 2.220 (56.4) 2.220 (56.4) 2.470 (62.7) 2.470 (62.7) 2.970 (75.4) 2.970 (75.4) D Dia ± .010 (± .3) .515 (13.1) .515 (13.1) .640 (16.3) .640 (16.3) .765 (19.4) .765 (19.4) .890 (22.6) .890 (22.6) 1.015 (25.8) 1.015 (25.8) 1.202 (30.5) 1.202 (30.5) 1.452 (36.9) 1.452 (36.9) 1.765 (44.8) 1.765 (44.8) 2.015 (51.2) 2.015 (51.2) 2.265 (57.5) 2.265 (57.5) 2.515 (63.9) 2.515 (63.9) 3.015 (76.6) 3.015 (76.6) J Max .630 (16.0) .630 (16.0) .755 (19.2) .755 (19.2) .942 (23.9) .942 (23.9) 1.067 (27.1) 1.067 (27.1) 1.192 (30.3) 1.192 (30.3) 1.380 (35.1) 1.380 (35.1) 1.535 (39.0) 1.535 (39.0) 1.848 (46.9) 1.848 (46.9) 2.255 (57.3) 2.255 (57.3) 2.505 (63.6) 2.505 (63.6) 2.755 (70.0) 2.755 (70.0) 3.255 (82.7) 3.255 (82.7) Length Max 1.281 (32.5) 1.969 (50.0) 1.281 (32.5) 1.969 (50.0) 1.281 (32.5) 1.969 (50.0) 1.281 (32.5) 1.969 (50.0) 1.281 (32.5) 1.969 (50.0) 1.344 (34.1) 1.969 (50.0) 1.344 (34.1) 1.969 (50.0) 1.344 (34.1) 2.062 (52.4) 1.406 (35.7) 2.062 (52.4) 1.406 (35.7) 2.062 (52.4) 1.406 (35.7) 2.375 (60.3) 1.531 (38.9) 2.375 (60.3) * Not Available in Style M Clamp Dash No. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Style 1, 2, 4 3 1,2, 4 3 1, 2, 4 3 1, 2, 4 3 1, 2, 4 3 1, 2, 4 3 1, 2, 4 3 1, 2, 4 3 1, 2, 4 3 1, 2, 4 3 1, 2, 4 3 1, 2, 4 3 E Max --------.780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .811 (20.6) .811 (20.6) .905 (23.0) .905 (23.0) 1.092 (27.7) 1.092 (27.7) 1.124 (28.5) 1.124 (28.5) 1.399 (35.5) 1.399 (35.5) 1.399 (35.5) 1.399 (35.5) --------- © 2005 Glenair, Inc. F Max --------.957 (24.3) .957 (24.3) 1.145 (29.1) 1.145 (29.1) 1.332 (33.8) 1.332 (33.8) 1.332 (33.8) 1.332 (33.8) 1.551 (39.4) 1.551 (39.4) 1.770 (45.0) 1.770 (45.0) 2.113 (53.7) 2.113 (53.7) 2.363 (60.0) 2.363 (60.0) 2.770 (70.4) 2.770 (70.4) 3.020 (76.7) 3.020 (76.7) --------- TABLE III (Continued) G Max .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) 1.073 (27.3) 1.073 (27.3) 1.323 (33.6) 1.323 (33.6) 1.323 (33.6) 1.323 (33.6) 1.572 (39.9) 1.572 (39.9) 1.572 (39.9) 1.572 (39.9) 1.572 (39.9) 1.572 (39.9) CAGE Code 06324 H Max .843 .843 .906 .906 1.093 1.093 1.187 1.187 1.281 1.281 1.500 1.500 1.719 1.719 2.062 2.062 2.312 2.312 2.719 2.719 2.969 2.969 3.531 3.531 (21.4) (21.4) (23.0) (23.0) (27.8) (27.8) (30.1) (30.1) (32.5) (32.5) (38.1) (38.1) (43.7) (43.7) (52.4) (52.4) (58.7) (58.7) (69.1) (69.1) (75.4) (75.4) (89.7) (89.7) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 63 - Page 9 www.glenair.com