62 620-002 Strain Relief Stainless Steel - Rotatable Coupling - 90° STAINLESS STEEL 620 A A 002 U 16 D CONNECTOR DESIGNATOR A Product Series Drain Hole Option (Omit for None) Connector Designator Shell Size ROTATABLE COUPLING Angular Function A = 90° Basic Part No. Finish Z1 = Passivate U = Black Cadmium E (Table III) A Thread (Table I) H-Drain Holes, 4 Places, 90° Apart C (Table I) F (Table III) F (Table III) G (Table III) Cable Entry See inside back cover fold-out or page 14 for Table I. Shell Size 08 10 12 14 16 18 20 22 24 28 E Max .704 (17.9) .786 (20.0) .979 (24.9) 1.039 (26.4) 1.188 (30.2) 1.300 (33.0) 1.425 (36.2) 1.550 (39.4) 1.675 (42.5) 1.813 (46.1) F Max .808 (20.5) .867 (22.0) .929 (23.6) .992 (25.2) 1.056 (26.8) 1.233 (31.3) 1.296 (32.9) 1.358 (34.5) 1.420 (36.1) 1.634 (41.5) TABLE III: CABLE ENTRY G H Max Max .752 (19.1) .125 (3.2) .832 (21.1) .125 (3.2) .988 (25.1) .188 (4.8) 1.046 (26.6) .188 (4.8) 1.319 (33.5) .188 (4.8) 1.451 (36.9) .188 (4.8) 1.551 (39.4) .188 (4.8) 1.653 (42.0) .188 (4.8) 1.775 (45.1) .188 (4.8) 2.020 (51.3) .188 (4.8) Cable Entry Closed Open .125 (3.2) .204 (5.2) .187 (4.7) .286 (7.3) .291 (7.4) .416 (10.6) .351 (8.9) .476 (12.1) .501 (12.7) .626 (15.9) .518 (13.2) .706 (17.9) .581 (14.8) .831 (21.1) .644 (16.4) .956 (24.3) .706 (17.9) 1.081 (27.5) .750 (19.1) 1.187 (30.1) 1. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 62 - Page 13