45 450-001 Qwik-Ty® Strain Relief - Connector Designator D Direct Coupling (Straight) Rotatable Coupling (45° and 90° Elbows) 450 D S 001 M 16 G CONNECTOR DESIGNATOR D A Thread (Table I) Product Series Ground Lug (Omit for none) Connector Designator Shell Size (Table I) Angle and Profile A = 90 B = 45 S = Straight Finish (Table II) Basic Part Number G F B (Table I) E H D (Table I) D (Table I) J STRAIGHT DIRECT COUPLING .140 (3.6) Dia (Typ.) E Ground Lug (Optional) Use MS3367-1 Tie Strap or Equivalent (Typical) 45° ROTATABLE COUPLING E 90° ROTATABLE COUPLING See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08 10 12 14 16 18 20 22 24 E Cable Entry .275 (7.0) .402 (10.2) .516 (13.1) .651 (16.5) .766 (19.5) .872 (22.1) .997 (25.3) 1.125 (28.6) 1.247 (31.7) TABLE III: DIMENSIONS H G F Max Max Max 1.400 (35.6) 1.850 (47.0) 1.240 (31.5) 1.400 (35.6) 1.850 (47.0) 1.240 (31.5) 1.400 (35.6) 1.850 (47.0) 1.240 (31.5) 1.610 (40.9) 2.350 (59.7) 1.230 (31.2) 1.610 (40.9) 2.350 (59.7) 1.230 (31.2) 1.610 (40.9) 2.440 (62.0) 1.260 (32.0) 1.680 (42.7) 2.510 (63.8) 1.260 (32.0) 1.680 (42.7) 2.510 (63.8) 1.260 (32.0) 1.770 (45.0) 2.650 (67.3) 1.260 (32.0) J Max .880 (22.4) .940 (23.9) 1.000 (25.4) 1.320 (33.5) 1.380 (35.1) 1.460 (37.1) 1.510 (38.4) 1.560 (39.6) 1.630 (41.4) 1. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 45 - Page 3