BYV29B-600 Rectifier diode ultrafast Rev. 01 — 11 August 2003 Product data M3D166 1. Product profile 1.1 Description Ultra-fast, epitaxial rectifier diode in a surface mount plastic package. Product availability: BYV29B-600 in SOT404 (D2-PAK). 1.2 Features ■ Low forward voltage ■ Soft recovery characteristic ■ Fast switching ■ High thermal cycling performance. 1.3 Applications ■ Switched-mode power supplies ■ Low loss rectification. 1.4 Quick reference data ■ VR ≤ 600 V ■ IF(AV) ≤ 9 A ■ VF ≤ 1.03 V ■ trr ≤ 60 ns 2. Pinning information Table 1: Pinning - SOT404 (D2-PAK), simplified outline and symbol Pin Description 1 no connection 2 cathode (k) 3 anode (a) mb mounting base; connected to cathode (k) Simplified outline k [1] mb 3 MBK116 SOT404 (D2-PAK) It is not possible to make connection to pin 2 of the SOT404 package. a 001aaa020 2 1 [1] Symbol BYV29B-600 Philips Semiconductors Rectifier diode ultrafast 3. Ordering information Table 2: Ordering information Type number BYV29B-600 Package Name Description D2-PAK Version Plastic single-ended surface mounted package; 3 leads (one lead cropped) SOT404 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VRRM repetitive peak reverse voltage - 600 V VRWM crest working reverse voltage - 600 V VR reverse voltage - 600 V - 9 A - 18 A - 70 A IF(AV) average forward current square wave; δ = 0.5; Tmb ≤ 120 °C IFRM repetitive peak forward current square wave; t = 25 µs; δ = 0.5; Tmb ≤ 120 °C IFSM non-repetitive peak forward current sinusoidal; with reapplied VRRM(max) tp = 10 ms tp = 8.3 ms [1] - 77 A Tstg storage temperature −40 +150 °C Tj junction temperature - +150 °C [1] Neglecting switching and reverse current losses. © Koninklijke Philips Electronics N.V. 2003. All rights reserved. 9397 750 11884 Product data Rev. 01 — 11 August 2003 2 of 12 BYV29B-600 Philips Semiconductors Rectifier diode ultrafast 003aaa446 20 PF 100 Tmb(max) (W) (°C) δ=1 112.5 15 003aaa447 20 PF (W) 16 a = 1.57 110 1.9 2.2 δ = 0.5 2.8 12 10 125 δ = 0.2 δ = 0.1 100 Tmb(max) (°C) δ= P tp 120 4 8 130 4 140 T 5 137.5 t tp T 150 0 0 4 8 12 16 IF(AV) (A) Square current waveform 150 0 0 8 IF(AV) (A) 12 Sinusoidal current waveform I F ( RMS ) a = -----------------I F ( AV ) I F ( AV ) = I F ( RMS ) × δ Fig 1. Maximum forward power dissipation (square current waveform) as a function of average forward current. Fig 2. Maximum forward power dissipation (sinusoidal current waveform) as a function of average forward current. © Koninklijke Philips Electronics N.V. 2003. All rights reserved. 9397 750 11884 Product data 4 Rev. 01 — 11 August 2003 3 of 12 BYV29B-600 Philips Semiconductors Rectifier diode ultrafast 5. Thermal characteristics Table 4: Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit Rth(j-mb) thermal resistance from junction to mounting base Figure 3 - - 2.5 K/W Rth(j-a) thermal resistance from junction to ambient - 50 - K/W in free air 5.1 Transient thermal impedance 003aaa453 10 Zth(j-mb) (K/W) 1 10-1 P 10-2 t tp 10-3 10-6 10-5 10-4 10-3 10-2 10-1 1 tp (s) 10 Fig 3. Transient thermal impedance from junction to mounting base as a function of pulse duration. © Koninklijke Philips Electronics N.V. 2003. All rights reserved. 9397 750 11884 Product data Rev. 01 — 11 August 2003 4 of 12 BYV29B-600 Philips Semiconductors Rectifier diode ultrafast 6. Characteristics Table 5: Characteristics Tj = 25 °C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Tj = 150 °C; Figure 4 - 0.9 1.03 V Tj = 25 °C; Figure 4 - 1.05 1.25 V - 1.3 1.45 V Tj = 100 °C - 0.1 0.35 mA Tj = 25 °C - 2 50 µA Static characteristics VF forward voltage IF = 8 A IF = 20 A IR reverse current VR = VRRM Dynamic characteristics Cd diode capacitance f = 1 MHz; VR = 100 V; Figure 8 - 7 - pF Qrr reverse recovery charge IF = 2 A; VR ≥ 30 V; dIF/dt = 20 A/µs; Figure 7 - 40 70 nC trr reverse recovery time IF = 1 A; VR ≥ 30 V; dIF/dt = 100 A/µs; Figure 5 - 50 60 ns Irrm peak reverse recovery current IF = 10 A; VR ≥ 30 V; dIF/dt = 50 A/µs Tj = 100 °C; Figure 6 - 3 5.5 A Vfr forward recovery voltage IF = 10 A; dIF/dt = 10 A/µs - 3.2 - V © Koninklijke Philips Electronics N.V. 2003. All rights reserved. 9397 750 11884 Product data Rev. 01 — 11 August 2003 5 of 12 BYV29B-600 Philips Semiconductors Rectifier diode ultrafast 003aaa450 36 Tj = 150 °C Tj = 25 °C IF (A) 003aaa448 103 trr (ns) IF = 10 A 24 16 102 typ max IF = 1 A 8 Tj = 25 °C Tj = 150 °C 0 0 0.4 1.2 0.8 10 1.6 2 Fig 4. Forward current as a function of forward voltage; typical values. 003aaa449 10 IF = 10 A Irrm (A) 2 -dIF/dt (A/µs) 10 10 VF (V) Fig 5. Maximum reverse recovery time as a function of rate of change of forward current. 003aaa452 103 Qrr (nC) IF = 10 A 102 1 IF = 1 A IF = 2 A 10-1 10 25 °C 150 °C Tj = 25 °C Tj = 100 °C 10-2 1 1 10 -dIF/dt (A/µs) 102 Fig 6. Reverse current as a function of rate of change of forward current; typical values. 1 -dIF/dt (A/µs) 102 Fig 7. Maximum reverse recovery charge as a function of rate of change of forward current. © Koninklijke Philips Electronics N.V. 2003. All rights reserved. 9397 750 11884 Product data 10 Rev. 01 — 11 August 2003 6 of 12 BYV29B-600 Philips Semiconductors Rectifier diode ultrafast 003aaa451 102 Cd (pF) 10 1 1 10 102 3 VR (V) 10 f = 1MHz Fig 8. Diode capacitance as a function of reverse voltage; typical values. © Koninklijke Philips Electronics N.V. 2003. All rights reserved. 9397 750 11884 Product data Rev. 01 — 11 August 2003 7 of 12 BYV29B-600 Philips Semiconductors Rectifier diode ultrafast 7. Package outline Plastic single-ended surface mounted package (Philips version of D2-PAK); 3 leads (one lead cropped) SOT404 A A1 E mounting base D1 D HD 2 Lp 1 3 c b e e Q 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 b c D max. D1 E e Lp HD Q mm 4.50 4.10 1.40 1.27 0.85 0.60 0.64 0.46 11 1.60 1.20 10.30 9.70 2.54 2.90 2.10 15.80 14.80 2.60 2.20 OUTLINE VERSION REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 99-06-25 01-02-12 SOT404 Fig 9. SOT404 (D2-PAK). © Koninklijke Philips Electronics N.V. 2003. All rights reserved. 9397 750 11884 Product data Rev. 01 — 11 August 2003 8 of 12 BYV29B-600 Philips Semiconductors Rectifier diode ultrafast 8. Soldering 10.85 10.60 10.50 handbook, full pagewidth 1.50 7.50 7.40 1.70 2.25 2.15 8.15 8.275 8.35 1.50 4.60 0.30 4.85 5.40 7.95 8.075 3.00 0.20 1.20 1.30 1.55 solder lands solder resist 5.08 MSD057 occupied area solder paste Dimensions in mm. Fig 10. Reflow soldering footprint for SOT404. © Koninklijke Philips Electronics N.V. 2003. All rights reserved. 9397 750 11884 Product data Rev. 01 — 11 August 2003 9 of 12 BYV29B-600 Philips Semiconductors Rectifier diode ultrafast 9. Revision history Table 6: Revision history Rev Date 01 20030811 CPCN Description - Product data (9397 750 11884). © Koninklijke Philips Electronics N.V. 2003. All rights reserved. 9397 750 11884 Product data Rev. 01 — 11 August 2003 10 of 12 BYV29B-600 Philips Semiconductors Rectifier diode ultrafast 10. Data sheet status Level Data sheet status[1] Product status[2][3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 11. Definitions 12. Disclaimers Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Contact information For additional information, please visit http://www.semiconductors.philips.com. For sales office addresses, send e-mail to: [email protected]. Product data Fax: +31 40 27 24825 © Koninklijke Philips Electronics N.V. 2003. All rights reserved. 9397 750 11884 Rev. 01 — 11 August 2003 11 of 12 Philips Semiconductors BYV29B-600 Rectifier diode ultrafast Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 5.1 6 7 8 9 10 11 12 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4 Transient thermal impedance . . . . . . . . . . . . . . 4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 © Koninklijke Philips Electronics N.V. 2003. Printed in The Netherlands All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 11 August 2003 Document order number: 9397 750 11884