GF1A, GF1B, GF1D, GF1G, GF1J, GF1K, GF1M www.vishay.com Vishay Semiconductors Surface Mount Glass Passivated Rectifier FEATURES • Superectifier structure for high reliability condition • Ideal for automated placement SUPERECTIFIER® • Low forward voltage drop • Low leakage current • High forward surge capability • Meets environmental standard MIL-S-19500 • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C DO-214BA (GF1) • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes for consumer, automotive and telecommunication. PRIMARY CHARACTERISTICS MECHANICAL DATA IF(AV) 1.0 A VRRM 50 V, 100 V, 200 V, 400 V, 600 V, 800 V, 1000 V IFSM 30 A VF 1.1 V, 1.2 V IR 5.0 μA TJ max. 175 °C Package DO-214BA (GF1) Diode variations Single die Case: DO-214BA, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code GF1A GF1B GF1D GF1G GF1J GF1K GF1M GA GB GD GG GJ GK GM UNIT Max. repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Max. RMS voltage VRMS 35 70 140 280 420 560 700 V Max. DC blocking voltage VDC 50 100 200 400 600 800 1000 Max. average forward rectified current at TL = 125 °C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A TJ, TSTG - 65 to + 175 °C Operating junction and storage temperature range Revision: 14-Aug-13 V Document Number: 88617 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GF1A, GF1B, GF1D, GF1G, GF1J, GF1K, GF1M www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Max. instantaneous forward voltage 1.0 A SYMBOL GF1A GF1B GF1D VF TA = 25 °C Max. DC reverse current at rated DC blocking voltage TA = 125 °C GF1G GF1J GF1K 1.1 GF1M 1.2 V 5.0 IR UNIT μA 50 Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 2.0 μs Typical junction capacitance 4.0 V, 1 MHz CJ 15 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance (1) GF1A GF1B GF1D GF1G RJA 80 RJL 26 GF1J GF1K GF1M UNIT °C/W Note (1) Thermal resistance from junction to ambient and from junction to lead, PCB mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas ORDERING INFORMATION (Example) UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE GF1J-E3/67A PREFERRED P/N 0.104 67A 1500 7" diameter plastic tape and reel GF1J-E3/5CA 0.104 5CA 6500 13" diameter plastic tape and reel GF1JHE3/67A (1) 0.104 67A 1500 7" diameter plastic tape and reel (1) 0.104 5CA 6500 13" diameter plastic tape and reel GF1JHE3/5CA Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1000 60 Hz Resistive or Inductive Load Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.25 1.00 0.75 0.50 0.25 0 100 P.C.B. Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) Copper Pad Areas Sine waveform, TA = 25 °C 100 10 110 120 130 140 150 160 170 180 0.1 1 10 Lead Temperature (°C) tp, Pulse Width (ms) Fig. 1 - Forward Current Derating Curve Fig. 2 - Non-Repetitive Peak Forward Surge Current Revision: 14-Aug-13 Document Number: 88617 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GF1A, GF1B, GF1D, GF1G, GF1J, GF1K, GF1M www.vishay.com Vishay Semiconductors 30 Junction Capacitance (pF) Instantaneous Forward Current (A) 10 1 0.1 Pulse Width = 300 µs 1 % Duty Cycle TJ = 25 °C 0.01 0.4 10 1 0.6 0.8 1.0 1.2 1.4 1 1.6 100 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 10 100 Transient Thermal Impedance (°C/W) Instantaneous Reverse Leakage Current (µA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1 TJ = 100 °C 0.1 TJ = 25 °C 0.01 0 20 40 60 80 10 1 Mounted on 0.2" x 0.27" (5.0 mm x 7.0 mm) Copper Pad Areas 0.1 0.01 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214BA (GF1) Cathode Band Mounting Pad Layout 0.066 (1.68) 0.040 (1.02) 0.076 (1.93) MAX. 0.066 (1.68) MIN. 0.187 (4.75) 0.167 (4.24) 0.015 (0.38) 0.0065 (0.17) 0.060 (1.52) MIN. 0.108 (2.74) 0.098 (2.49) 0.118 (3.00) 0.100 (2.54) 0.060 (1.52) 0.030 (0.76) Revision: 14-Aug-13 0.006 (0.152) TYP. 0.220 (5.58) REF. 0.114 (2.90) 0.094 (2.39) 0.226 (5.74) 0.196 (4.98) Document Number: 88617 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000