!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. NTC Thermistors Cat.No.R44E-13 R44E.pdf Feb.21,2011 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. EU RoHS Compliant • • • All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). R44E.pdf Feb.21,2011 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ourour product specifications or consult the approval sheetsheet for product specifications before ordering. • This catalog has only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 CONTENTS 1 Part Numbering 2 Basic Characteristics 6 1 Temperature Sensor and Compensation 0201 (0603) Size 7 2 Temperature Sensor and Compensation 0402 (1005) Size 8 3 Temperature Sensor and Compensation 0603 (1608) Size 10 4 Temperature Sensor and Compensation 0805 (2012) Size 12 Temp. Sensor and Compensation Chip Type Standard Land Pattern Dimensions 13 Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value) 14 Temp. Sensor and Compensation Chip Type !Caution/Notice 18 Temp. Sensor and Compensation Chip Type Package 22 Temperature Sensor Thermo String Type 25 Temperature Sensor Thermo String Type Specifications and Test Methods 26 6 Temperature Sensor Lead Type 28 7 Temperature Sensor Lead Insulation Type 29 5 Temperature Sensor Temperature Characteristics (Center Value) 31 Temperature Sensor Thermo String Type/Lead Type !Caution/Notice 32 Temperature Sensor Thermo String Type/Lead Type Package 34 8 Inrush Current Suppression Lead Type 35 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) 37 Inrush Current Suppression Lead Type !Caution/Notice 41 Inrush Current Suppression Lead Type Package 43 2 3 4 5 6 7 8 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ourour product specifications or consult the approval sheetsheet for product specifications before ordering. • This catalog has only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 o Part Numbering NTC Thermistors for Temp. Sensor and Compensation Chip Type (Part Number) NC P 18 XH 103 q w e r t 03 RB y u i J tResistance qProduct ID Product ID NC NTC Thermistors Chip Type wSeries Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex. Code Resistance Code Series 102 1kΩ P Plated Termination Series 103 10kΩ 104 100kΩ eDimensions (LgW) yResistance Tolerance Code Dimensions (LgW) EIA 03 0.60g0.30mm 0201 Code Resistance Tolerance 15 1.00g0.50mm 0402 D ±0.5% 18 1.60g0.80mm 0603 E ±3% 21 2.00g1.25mm 0805 F ±1% J ±5% rTemperature Characteristics 2 uIndividual Specifications Code Temperature Characteristics WB Nominal B-Constant 4050e4099K Structures and others are expressed by two figures. WD Nominal B-Constant 4150e4199K Ex. WF Nominal B-Constant 4250e4299K WL Nominal B-Constant 4450e4499K WM Nominal B-Constant 4500e4549K XC Nominal B-Constant 3100e3149K Code XF Nominal B-Constant 3250e3299K RA Plastic Taping 4mm Pitch Code Individual Specifications 03 Standard Type iPackaging Packaging XH Nominal B-Constant 3350e3399K RB Paper Taping 4mm Pitch XM Nominal B-Constant 3500e3549K RC Paper Taping 2mm Pitch (10000 pcs.) XQ Nominal B-Constant 3650e3699K RL Paper Taping 2mm Pitch (15000 pcs.) XV Nominal B-Constant 3900e3949K XW Nominal B-Constant 3950e3999K R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ourour product specifications or consult the approval sheetsheet for product specifications before ordering. • This catalog has only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 NTC Thermistor for Temperature Sensor Thermo String Type (Part Number) NXF T 15 XH 103 q w e r t F A 2 B y u i o qProduct ID 025 !0 uLead Wire Type Product ID NXF NTC Thermistors Sensor Thermo String Type wIndividual Specifications Code Lead Wire Type A ø0.3 Copper Lead Wire with Polyurethane Coat iShape of the Lead Wire Kink Code Individual Specifications Code Shape of the Lead Wire Kink T Commercial Type 1 The Twist of Lead Wire Type 2 Standard Type eChip Dimensions Code Dimensions (LxT) EIA 15 1.00 x 0.50mm 0402 oPackaging Code Packaging B Bulk rTemperature Characteristics !0Dimensions (Full Length) Code Temperature Characteristics WB Nominal B-Constant 4050–4099K Code Dimensions (Full Length) WF Nominal B-Constant 4250–4299K 025 25mm XH Nominal B-Constant 3350–3399K 030 30mm 040 40mm 050 50mm 060 60mm 070 70mm 080 80mm tResistance Expressed by three figures. The unit is (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex. Code Resistance 103 10kΩ 473 47kΩ 104 100kΩ yResistance Tolerance Code Resistance Tolerance F ±1% 090 90mm 100 100mm 110 110mm 120 120mm 130 130mm 140 140mm 150 150mm 3 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ourour product specifications or consult the approval sheetsheet for product specifications before ordering. • This catalog has only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 NTC Thermistors for Temperature Sensor Lead Type (Part Number) NT SA0 XH 103 q w e r F E1 B0 t y u qProduct ID tResistance Tolerance Product ID NT NTC Thermistors Code Resistance Tolerance E ±3% F ±1% wSeries Code Series SA0 for Temperature Sensors No Lead-coating Type SD0 for Temperature Sensors Lead-coating Type (Total Length 30mm max.) SD1 for Temperature Sensors Lead-coating Type (Total Length 30 to 50mm) yIndividual Specifications A lead structure and other specifications are expressed by two-digit alphanumerics. Code Individual Specifications E1 Standard Bulk (NTSA, NTSD0 Series) N6 Standard Ammo Pack Taping (NTSA Series) PB Standard Bulk (NTSD1 Series) eTemperature Characteristics Temperature Characteristics WB Nominal B-Constant 4050e4099K Code Packaging WC Nominal B-Constant 4100e4149K A0 Ammo Pack Taping WD Nominal B-Constant 4150e4199K B0 Bulk WF Nominal B-Constant 4250e4299K XH Nominal B-Constant 3350e3399K XM Nominal B-Constant 3500e3549K Code Total Length XR Nominal B-Constant 3700e3749K 30 30mm XV Nominal B-Constant 3900e3949K 40 40mm 50 50mm rResistance Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex. Code Resistance 4 uPackaging (NTSA/NTSD0 Series) Code 202 2kΩ 203 20kΩ uTotal Length (NTSD1 Series) R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. ourour product specifications or consult the approval sheetsheet for product specifications before ordering. • This catalog has only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 NTC Thermistors for Inrush Current Suppression Lead Type (Part Number) NT PA7 160 L BM B0 q w e r t y qProduct ID rResistance Tolerance Product ID NT NTC Thermistors wSeries Code Resistance Tolerance L ±15% tIndividual Specifications Code Series Nominal Body Diameter PA7 ø7mm PA9 A lead structure and other specifications are expressed by two-digit alphanumerics. ø9mm Code Individual Specifications Body Diameter ø10mm B1 Standard Type (Ammo Pack) ø7mm, ø9mm ø13mm BM Standard Type (Bulk) ø7mm, ø9mm PAJ ø18mm D6 PAN ø22mm DK Standard (Bulk) ø18mm, ø22mm DN Standard (Bulk) ø10mm, ø13mm Inrush Current Suppression Lead Type PAA PAD Standard Type (Ammo Pack) ø10mm, ø13mm eResistance Expressed by three-digit alphanumerics. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. Ex. Code yPackaging Code Packaging A0 Ammo Pack Taping B0 Bulk Resistance 3R0 3Ω 100 10Ω 5 R44E.pdf Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this catalog catalog to to prevent prevent smoking smoking and/or and/or burning, burning, etc. etc. !Note •• Please This catalog has only typical specifications ourour product specifications or consult the approval sheet for product specifications before ordering. •• This specifications because because there there is is no no space spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval sheet for product specifications before ordering. Feb.21,2011 Basic Characteristics !Basic Characteristics 1. Zero-power Resistance of Thermistor: R Resistance vs. Temperature 102 Resistance vs. Temperature Characteristics, R/R25 R=R0 expB (1/T-1/T0) ..............(1) R: Resistance in ambient temperature T (K) (K: absolute temperature) R0: Resistance in ambient temperature T0 (K) B: B-Constant of Thermistor 2. B-Constant as (1) formula B=Rn (R/R0) / (1/T-1/T0) ............(2) 3. Thermal Dissipation Constant When electric power P (mW) is spent in ambient temperature T1 and thermistor temperature rises T2, there is a formula as follows P=C (T2-T1) ..................(3) C: Thermal dissipation constant (mW/°C) Thermal dissipation constant is varied with dimensions, measurement conditions, etc. 101 1 10−1 B=3450 B=3900 B=4100 10−2 −20 0 20 40 60 80 100 120 Temperature (˚C) 4. Thermal Time Constant Period in which Thermistor's temperature will change 63.2% of its temperature difference from ambient temperature T0 (°C) to T1 (°C). Thermal Time Constant T1 Temperature X 63.2% T0 Time !Performance Item Resistance Condition Measured by zero-power in specified ambient temperature. Calculated between two specified ambient temperatures by next formula. T and T0 is absolute temperature (K). B-Constant B= Thermal Dissipation Constant Rn (R/R0) 1/TY1/T0 Shows necessary electric power that Thermistor's temperature rises 1˚C by self heating. It is calculated by next formula (mW/˚C). C= P TYT0 Rated Electric Power Shows the required electric power that causes Thermistor's temperature to rise to a specified temperature by self heating, at ambient temperature of 25 °C. Permissive Operating Current It is possible to keep Thermistor's temperature rising max. 1˚C. Please inquire about test conditions and ratings. 6 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical ourour product specifications or consult the approval sheetsheet for product specifications before ordering. typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 NTC Thermistors 1 Temperature Sensor and Compensation 0201 (0603) Size 0.30±0.03 0201/0402/0603/0805 sized Chip NTC Thermistors have a unique inner construction and nickel barrier terminations which provide excellent solderability and high stability in the application environment. 0.15±0.05 0.15±0.05 0.60±0.03 ■ Features 0.30±0.03 1. Excellent solderability and high stability in environment 2. Excellent long-term aging stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. NCP series are recognized by UL/cUL (UL1434, File No. E137188). Electrode (Ag System + Ni Plating + Sn Plating) (in mm) ■ Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Resistance (25°C) (ohm) B-Constant (25-50°C) (K) NCP03YS110J05RL 11 ±5% 2750 ±3% 2758 2758 2758 9.50 100 1 NCP03YS220J05RL 22 ±5% 2750 ±3% 2758 2758 2758 6.70 100 1 NCP03YS330J05RL 33 ±5% 2750 ±3% 2758 2758 2758 5.50 100 1 NCP03YS470J05RL 47 ±5% 2750 ±3% 2758 2758 2758 4.60 100 1 NCP03YS680J05RL 68 ±5% 2750 ±3% 2758 2758 2758 3.80 100 1 NCP03YS101J05RL 100 ±5% 2750 ±3% 2758 2758 2758 3.10 100 1 NCP03XM102p05RL 1.0k 3500 ±1% 3539 3545 3560 1.00 100 1 NCP03XM152p05RL 1.5k 3500 ±1% 3539 3545 3560 0.81 100 1 NCP03XM222p05RL 2.2k 3500 ±1% 3539 3545 3560 0.67 100 1 NCP03XM332p05RL 3.3k 3500 ±1% 3539 3545 3560 0.55 100 1 NCP03XM472p05RL 4.7k 3500 ±1% 3539 3545 3560 0.46 100 1 NCP03XH682p05RL 6.8k 3380 ±1% 3428 3434 3455 0.38 100 1 NCP03XH103F25RL 10k ±1% 3380 ±0.8% 3428 3434 3455 0.31 100 1 NCP03XH103F05RL 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1 NCP03XH103p05RL 10k 3380 ±1% 3428 3434 3455 0.31 100 1 NCP03XV103p05RL 10k 3900 ±1% 3930 3934 3944 0.31 100 1 NCP03XH153p05RL 15k 3380 ±1% 3428 3434 3455 0.25 100 1 NCP03XH223p05RL 22k 3380 ±1% 3428 3434 3455 0.21 100 1 NCP03WF333p05RL 33k 4250 ±1% 4303 4311 4334 0.17 100 1 NCP03WB473p05RL 47k 4050 ±3% 4101 4108 4131 0.14 100 1 NCP03WL473p05RL 47k 4485 ±1% 4537 4543 4557 0.14 100 1 NCP03WF683p05RL 68k 4250 ±1% 4303 4311 4334 0.12 100 1 NCP03WL683p05RL 68k 4485 ±1% 4537 4543 4557 0.12 100 1 NCP03WF104F05RL 100k ±1% 4250 ±1% 4303 4311 4334 0.10 100 1 NCP03WF104p05RL 100k 4250 ±1% 4303 4311 4334 0.10 100 1 NCP03WL104p05RL 100k 4485 ±1% 4537 4543 4557 0.10 100 1 NCP03WL154p05RL 150k 4485 ±1% 4537 4543 4557 0.08 100 1 NCP03WL224p05RL 220k 4485 ±1% 4537 4543 4557 0.06 100 1 Part Number B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 7 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 NTC Thermistors Temperature Sensor and Compensation 0402 (1005) Size 0.5±0.05 0201/0402/0603/0805 sized Chip NTC Thermistors have a unique inner construction and nickel barrier terminations which provide excellent solderability and high stability in the application environment. 0.25±0.10 0.25±0.10 1.0±0.05 ■ Features 1. Excellent solderability and high stability in environment 2. Excellent long-term aging stability 3. High accuracy in resistance and B-Constant 4. Reflow soldering possible 5. Provide flexibility to use the smaller size version in certain circuits because of same B-Constant in the same resistance. 6. NCP series are recognized by UL/cUL (UL1434, File No. E137188). 0.5±0.05 2 Electrode (Ag System + Ni Plating + Sn Plating) (in mm) ■ Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) NCP15XC220p03RC 22 3100 ±3% 3126 3128 3136 6.70 100 1 NCP15XC330p03RC 33 3100 ±3% 3126 3128 3136 5.50 100 1 NCP15XC470p03RC 47 3100 ±3% 3126 3128 3136 4.60 100 1 NCP15XC680p03RC 68 3100 ±3% 3126 3128 3136 3.80 100 1 NCP15XF101p03RC 100 3250 ±3% 3282 3284 3296 3.10 100 1 NCP15XF151p03RC 150 3250 ±3% 3282 3284 3296 2.50 100 1 NCP15XM221p03RC 220 3500 ±3% 3539 3545 3560 2.10 100 1 NCP15XM331p03RC 330 3500 ±3% 3539 3545 3560 1.70 100 1 NCP15XQ471p03RC 470 3650 ±2% 3688 3693 3706 1.40 100 1 NCP15XQ681p03RC 680 3650 ±3% 3688 3693 3706 1.20 100 1 NCP15XQ102p03RC 1.0k 3650 ±2% 3688 3693 3706 1.00 100 1 NCP15XW152p03RC 1.5k 3950 ±3% 3982 3987 3998 0.81 100 1 NCP15XW222p03RC 2.2k 3950 ±3% 3982 3987 3998 0.67 100 1 NCP15XW332p03RC 3.3k 3950 ±3% 3982 3987 3998 0.55 100 1 NCP15XM472p03RC 4.7k 3500 ±2% 3539 3545 3560 0.46 100 1 NCP15XW472p03RC 4.7k 3950 ±3% 3982 3987 3998 0.46 100 1 NCP15XW682p03RC 6.8k 3950 ±3% 3982 3987 3998 0.38 100 1 NCP15XH103D03RC 10k ±0.5% 3380 ±0.7% 3428 3434 3455 0.31 100 1 NCP15XH103F03RC 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1 NCP15XH103p03RC 10k 3380 ±1% 3428 3434 3455 0.31 100 1 NCP15XV103p03RC 10k 3900 ±3% 3930 3934 3944 0.31 100 1 NCP15XW153p03RC 15k 3950 ±3% 3982 3987 3998 0.25 100 1 NCP15XW223p03RC 22k 3950 ±3% 3982 3987 3998 0.21 100 1 NCP15WL223p03RC 22k 4485 ±1% 4537 4543 4557 0.21 100 1 NCP15WB333p03RC 33k 4050 ±3% 4101 4108 4131 0.17 100 1 Continued on the following page. 8 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Continued from the preceding page. Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) NCP15WL333p03RC 33k 4485 ±1% 4537 4543 4557 0.17 100 1 NCP15WB473D03RC 47k ±0.5% 4050 ±0.5% 4101 4108 4131 0.14 100 1 NCP15WB473F03RC 47k ±1% 4050 ±1% 4101 4108 4131 0.14 100 1 NCP15WB473p03RC 47k 4050 ±1% 4101 4108 4131 0.14 100 1 NCP15WL473p03RC 47k 4485 ±1% 4537 4543 4557 0.14 100 1 NCP15WD683p03RC 68k 4150 ±3% 4201 4209 4232 0.12 100 1 NCP15WL683p03RC 68k 4485 ±1% 4537 4543 4557 0.12 100 1 NCP15WF104D03RC 100k ±0.5% 4250 ±0.5% 4303 4311 4334 0.10 100 1 NCP15WF104F03RC 100k ±1% 4250 ±1% 4303 4311 4334 0.10 100 1 NCP15WF104p03RC 100k 4250 ±1% 4303 4311 4334 0.10 100 1 NCP15WL104p03RC 100k 4485 ±1% 4537 4543 4557 0.10 100 1 NCP15WL154p03RC 150k 4485 ±1% 4537 4543 4557 0.08 100 1 NCP15WM154p03RC 150k 4500 ±3% 4571 4582 4614 0.08 100 1 NCP15WM224p03RC 220k 4500 ±3% 4571 4582 4614 0.06 100 1 NCP15WM474p03RC 470k 4500 ±3% 4571 4582 4614 0.04 100 1 2 p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 9 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 NTC Thermistors Temperature Sensor and Compensation 0603 (1608) Size 0.8±0.15 0201/0402/0603/0805 sized Chip NTC Thermistors have a unique inner construction and nickel barrier terminations which provide excellent solderability and high stability in the application environment. 0.2-0.6 0.2-0.6 1.6±0.15 ■ Features 1. Excellent solderability and high stability in environment 2. Excellent long-term aging stability 3. High accuracy in resistance and B-constant 4. Flow / Reflow soldering possible 5. Provide flexibility to use the smaller size version in certain circuits because of same B-Constant in the same resistance. 6. NCP series are recognized by UL/cUL (UL1434, File No. E137188). 0.8±0.15 3 Electrode (Ag System + Ni Plating + Sn Plating) (in mm) ■ Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) NCP18XF101p03RB 100 3250 ±3% 3282 3284 3296 3.10 100 1 NCP18XF151p03RB 150 3250 ±3% 3282 3284 3296 2.50 100 1 NCP18XM221p03RB 220 3500 ±3% 3539 3545 3560 2.10 100 1 NCP18XM331p03RB 330 3500 ±3% 3539 3545 3560 1.70 100 1 NCP18XQ471p03RB 470 3650 ±2% 3688 3693 3706 1.40 100 1 NCP18XQ681p03RB 680 3650 ±3% 3688 3693 3706 1.20 100 1 NCP18XQ102p03RB 1.0k 3650 ±2% 3688 3693 3706 1.00 100 1 NCP18XW152p03RB 1.5k 3950 ±3% 3982 3987 3998 0.81 100 1 NCP18XW222p03RB 2.2k 3950 ±3% 3982 3987 3998 0.67 100 1 NCP18XW332p03RB 3.3k 3950 ±3% 3982 3987 3998 0.55 100 1 NCP18XM472p03RB 4.7k 3500 ±2% 3539 3545 3560 0.46 100 1 NCP18XW472p03RB 4.7k 3950 ±3% 3982 3987 3998 0.46 100 1 NCP18XW682p03RB 6.8k 3950 ±3% 3982 3987 3998 0.38 100 1 NCP18XH103D03RB 10k ±0.5% 3380 ±0.7% 3428 3434 3455 0.31 100 1 NCP18XH103F03RB 10k ±1% 3380 ±1% 3428 3434 3455 0.31 100 1 NCP18XH103p03RB 10k 3380 ±1% 3428 3434 3455 0.31 100 1 NCP18XV103p03RB 10k 3900 ±3% 3930 3934 3944 0.31 100 1 NCP18XW153p03RB 15k 3950 ±3% 3982 3987 3998 0.25 100 1 NCP18XW223p03RB 22k 3950 ±3% 3982 3987 3998 0.21 100 1 NCP18WB333p03RB 33k 4050 ±3% 4101 4108 4131 0.17 100 1 NCP18WB473D03RB 47k ±0.5% 4030 ±0.5% 4101 4108 4131 0.14 100 1 NCP18WB473F10RB 47k ±1% 4050 ±1.5% 4101 4108 4131 0.14 100 1 NCP18WB473p03RB 47k 4050 ±2% 4101 4108 4131 0.14 100 1 NCP18WD683p03RB 68k 4150 ±3% 4201 4209 4232 0.12 100 1 4255 4260 4282 0.10 100 1 NCP18WF104D03RB 100k ±0.5% 4200 ±0.5% Continued on the following page. 10 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Continued from the preceding page. Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) NCP18WF104F12RB 100k ±1% 4200 ±1% 4255 4260 4282 0.10 100 1 NCP18WF104p03RB 100k 4250 ±2% 4303 4311 4334 0.10 100 1 NCP18WM154p03RB 150k 4500 ±3% 4571 4582 4614 0.08 100 1 NCP18WM224p03RB 220k 4500 ±3% 4571 4582 4614 0.06 100 1 NCP18WM474p03RB 470k 4500 ±3% 4571 4582 4614 0.04 100 1 p is filled with resistance tolerance codes (E: ±3%, J: ±5%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 3 11 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 NTC Thermistors 1.25±0.2 Temperature Sensor and Compensation 0805 (2012) Size 0201/0402/0603/0805 sized Chip NTC Thermistors have a unique inner construction and nickel barrier terminations which provide excellent solderability and high stability in the application environment. 0.2-0.7 2.0±0.2 ■ Features 4 0.2-0.7 0.85±0.15 1. Excellent solderability and high stability in environment 2. Excellent long-term aging stability 3. High accuracy in resistance and B-constant 4. Flow / Reflow soldering possible 5. Provide flexibility to use the smaller size version in certain circuits because of same B-Constant in the same resistance. 6. NCP series are recognized by UL/cUL (UL1434, File No. E137188). Electrode (Ag System + Ni Plating + Sn Plating) (in mm) ■ Applications 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) NCP21XM221J03RA 220 ±5% 3500 ±3% 3539 3545 3560 3.00 200 2 NCP21XQ471J03RA 470 ±5% 3650 ±3% 3688 3693 3706 2.00 200 2 NCP21XQ102J03RA 1.0k ±5% 3650 ±3% 3688 3693 3706 1.40 200 2 NCP21XW222J03RA 2.2k ±5% 3950 ±3% 3982 3987 3998 0.90 200 2 NCP21XM472J03RA 4.7k ±5% 3500 ±3% 3539 3545 3560 0.65 200 2 NCP21XV103J03RA 10k ±5% 3900 ±3% 3930 3934 3944 0.44 200 2 NCP21XW153J03RA 15k ±5% 3950 ±3% 3982 3987 3998 0.36 200 2 NCP21XW223J03RA 22k ±5% 3950 ±3% 3982 3987 3998 0.30 200 2 NCP21WB333J03RA 33k ±5% 4050 ±3% 4101 4108 4131 0.24 200 2 NCP21WB473J03RA 47k ±5% 4050 ±3% 4101 4108 4131 0.20 200 2 NCP21WF104J03RA 100k ±5% 4250 ±3% 4303 4311 4334 0.14 200 2 Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 125°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 12 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R44E.pdf • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type Standard Land Pattern Dimensions c Chip b Part Number NCP03 NCP15 NCP18 NCP21 Solder Resist Land a Dimensions (mm) Soldering Methods Chip (LxW) a b Reflow Soldering 0.6x0.3 0.25 0.25 Reflow Soldering 1.0x0.5 0.4 0.4-0.5 Flow Soldering 0.6-1.0 0.8-0.9 1.6x0.8 Reflow Soldering 0.6-0.8 0.6-0.7 Flow Soldering 1.0-1.1 0.9-1.0 2.0x1.25 Reflow Soldering 1.0-1.1 0.6-0.7 c 0.3 0.5 0.6-0.8 0.6-0.8 1.0-1.2 1.0-1.2 4 13 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value) 4 Part Number NCPppYS110 11Ω Resistance 2750K B-Constant Temp. (°C) Resistance (Ω) Y40 127.366 Y35 101.662 Y30 81.726 Y25 66.148 Y20 53.946 Y15 44.273 Y10 36.494 Y5 30.262 0 25.226 5 21.150 10 17.828 15 15.103 20 12.859 25 11.000 30 9.452 35 8.162 40 7.077 45 6.161 50 5.389 55 4.731 60 4.168 65 3.687 70 3.273 75 2.915 80 2.605 85 2.335 90 2.100 95 1.894 100 1.713 105 1.554 110 1.412 115 1.287 120 1.176 125 1.077 NCPppYS220 22Ω 2750K Resistance (Ω) 254.732 203.325 163.452 132.296 107.893 88.546 72.987 60.523 50.451 42.300 35.657 30.205 25.719 22.000 18.904 16.323 14.155 12.323 10.778 9.461 8.336 7.374 6.545 5.830 5.210 4.671 4.201 3.789 3.427 3.107 2.825 2.574 2.352 2.153 NCPppXC220 22Ω 3100K Resistance (Ω) 355.823 273.975 213.003 166.943 131.997 105.318 84.670 68.628 55.981 45.859 37.819 31.396 26.211 22.000 18.560 15.735 13.403 11.462 9.842 8.488 7.348 6.399 5.595 4.896 4.299 3.795 3.360 2.983 2.656 2.367 2.116 1.901 1.712 1.543 NCPppYS330 33Ω 2750K Resistance (Ω) 382.098 304.987 245.178 198.444 161.839 132.819 109.481 90.785 75.677 63.449 53.485 45.308 38.578 33.000 28.356 24.485 21.232 18.484 16.167 14.192 12.504 11.061 9.817 8.744 7.814 7.006 6.301 5.683 5.140 4.661 4.237 3.862 3.528 3.230 NCPppXC330 33Ω 3100K Resistance (Ω) 533.734 410.962 319.504 250.415 197.996 157.978 127.005 102.942 83.972 68.789 56.728 47.094 39.317 33.000 27.840 23.603 20.104 17.193 14.763 12.732 11.022 9.598 8.392 7.345 6.448 5.692 5.040 4.474 3.983 3.551 3.173 2.851 2.568 2.314 NCPppYS470 47Ω 2750K Resistance (Ω) 544.201 434.376 349.193 282.633 230.498 189.167 155.927 129.299 107.782 90.367 76.176 64.529 54.944 47.000 40.386 34.872 30.239 26.326 23.025 20.213 17.809 15.753 13.982 12.454 11.130 9.979 8.974 8.094 7.320 6.638 6.035 5.500 5.024 4.600 NCPppXC470 47Ω 3100K Resistance (Ω) 760.166 585.310 455.051 356.652 281.994 224.998 180.886 146.614 119.596 97.972 80.794 67.073 55.997 47.000 39.651 33.616 28.633 24.487 21.026 18.133 15.698 13.670 11.952 10.461 9.184 8.107 7.179 6.373 5.673 5.057 4.520 4.060 3.657 3.296 NCPppYS680 68Ω 2750K Resistance (Ω) 787.354 628.459 505.215 408.915 333.487 273.688 225.597 187.071 155.940 130.744 110.212 93.361 79.494 68.000 58.430 50.454 43.750 38.089 33.313 29.244 25.766 22.792 20.230 18.019 16.102 14.437 12.984 11.710 10.591 9.604 8.731 7.957 7.269 6.655 Part Number NCPppXC680 68Ω Resistance 3100K B-Constant Temp. (°C) Resistance (Ω) Y40 1099.815 Y35 846.832 Y30 658.372 Y25 516.007 Y20 407.991 Y15 325.529 Y10 261.707 Y5 212.123 0 173.033 5 141.747 10 116.894 15 97.042 20 81.016 25 68.000 30 57.368 35 48.636 40 41.426 45 35.428 50 30.421 55 26.235 60 22.712 65 19.778 70 17.293 75 15.134 80 13.288 85 11.729 90 10.386 95 9.220 100 8.208 105 7.317 110 6.539 115 5.874 120 5.291 125 4.768 NCPppYS101 100Ω 2750K Resistance (Ω) 1157.874 924.204 742.963 601.346 490.422 402.482 331.760 275.105 229.324 192.270 162.076 137.296 116.902 100.000 85.927 74.197 64.339 56.013 48.989 43.006 37.891 33.517 29.750 26.498 23.680 21.231 19.094 17.221 15.575 14.124 12.840 11.702 10.690 9.787 NCPppXF101 100Ω 3250K Resistance (Ω) 1824.175 1390.685 1070.653 831.138 650.960 514.441 409.700 328.877 265.759 215.785 176.395 145.161 120.152 100.000 83.669 70.361 59.456 50.470 43.029 36.830 31.649 27.364 23.756 20.651 18.011 15.800 13.908 12.263 10.844 9.622 8.563 7.648 6.850 6.162 NCPppXF151 150Ω 3250K Resistance (Ω) 2736.262 2086.028 1605.979 1246.708 976.440 771.661 614.550 493.315 398.639 323.677 264.592 217.742 180.228 150.000 125.503 105.541 89.184 75.705 64.543 55.246 47.473 41.045 35.634 30.976 27.016 23.700 20.862 18.394 16.265 14.434 12.844 11.472 10.275 9.243 NCPppXM221 NCPppXM331 220Ω 330Ω 3500K 3500K Resistance (Ω) Resistance (Ω) 4947.904 7421.856 3703.755 5555.632 2798.873 4198.309 2135.887 3203.831 1645.037 2467.555 1278.034 1917.051 1000.620 1500.930 789.612 1184.418 627.752 941.628 502.474 753.711 405.010 607.514 328.480 492.720 268.044 402.066 220.000 330.000 181.576 272.365 150.668 226.002 125.681 188.521 105.336 158.004 88.717 133.076 75.059 112.588 63.777 95.666 54.415 81.622 46.631 69.946 40.115 60.172 34.637 51.955 30.013 45.019 26.110 39.165 22.790 34.186 19.957 29.935 17.541 26.312 15.453 23.180 13.663 20.494 12.114 18.171 10.778 16.168 NCPppXQ471 470Ω 3650K Resistance (Ω) 11822.473 8767.745 6570.224 4971.784 3796.933 2923.400 2269.599 1775.225 1399.050 1110.220 887.257 713.463 577.375 470.000 384.800 316.757 262.177 218.069 182.297 153.150 129.249 109.551 93.281 79.750 68.446 58.996 51.036 44.332 38.640 33.790 29.664 26.123 23.091 20.472 NCPppXQ681 680Ω 3650K Resistance (Ω) 17104.854 12685.248 9505.855 7193.219 5493.436 4229.599 3283.675 2568.411 2024.158 1606.275 1283.691 1032.245 835.351 680.000 556.733 458.287 379.320 315.504 263.749 221.579 186.998 158.499 134.960 115.383 99.029 85.356 73.839 64.140 55.905 48.888 42.918 37.795 33.409 29.618 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en Continued on the following page. 14 1 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. Part Number NCPppXM102 NCPppXQ102 NCPppXM152 NCPppXW152 NCPppXM222 NCPppXW222 NCPppXM332 NCPppXW332 2.2kΩ 3.3kΩ 1kΩ Resistance 1kΩ 1.5kΩ 1.5kΩ 2.2kΩ 3.3kΩ 3650K 3950K B-Constant 3500K 3500K 3500K 3950K 3500K 3950K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Y40 21.266 25.154 31.899 51.791 46.786 70.179 113.941 75.961 Y35 16.150 18.655 24.225 37.172 35.530 53.295 81.779 54.520 Y30 12.347 13.979 18.520 27.005 27.162 40.743 59.411 39.607 Y25 9.503 10.578 14.255 19.843 20.907 31.360 43.654 29.103 Y20 7.365 8.079 11.047 14.728 16.203 24.304 32.401 21.601 Y15 5.747 6.220 8.621 11.044 12.644 18.966 24.297 16.198 Y10 4.516 4.829 6.773 8.362 9.934 14.901 18.396 12.264 Y5 3.572 3.777 5.358 6.389 7.858 11.787 14.055 9.370 0 2.844 2.977 4.266 4.922 6.257 9.386 10.829 7.219 5 2.280 2.362 3.419 3.825 5.015 7.523 8.414 5.609 10 1.839 1.888 2.758 2.994 4.045 6.067 6.586 4.391 15 1.492 1.518 2.238 2.361 3.283 4.924 5.195 3.463 20 1.218 1.229 1.827 1.876 2.680 4.019 4.126 2.751 25 1.000 1.000 1.500 1.500 2.200 3.300 3.300 2.200 30 0.825 0.819 1.238 1.207 1.816 2.724 2.656 1.771 35 0.685 0.674 1.027 0.978 1.507 2.260 2.152 1.434 40 0.571 0.558 0.857 0.797 1.257 1.885 1.753 1.169 45 0.479 0.464 0.718 0.653 1.053 1.580 1.437 0.958 50 0.403 0.388 0.605 0.538 0.887 1.331 1.184 0.789 55 0.341 0.326 0.512 0.446 0.751 1.126 0.981 0.654 60 0.290 0.275 0.435 0.371 0.638 0.957 0.817 0.545 65 0.247 0.233 0.371 0.311 0.544 0.816 0.684 0.456 70 0.212 0.199 0.318 0.261 0.466 0.700 0.575 0.383 75 0.182 0.170 0.274 0.221 0.401 0.602 0.486 0.324 80 0.157 0.146 0.236 0.187 0.346 0.520 0.412 0.275 85 0.136 0.126 0.205 0.160 0.300 0.450 0.351 0.234 90 0.119 0.109 0.178 0.137 0.261 0.392 0.301 0.200 95 0.104 0.094 0.155 0.117 0.228 0.342 0.258 0.172 100 0.091 0.082 0.136 0.101 0.200 0.299 0.223 0.149 105 0.080 0.072 0.120 0.088 0.175 0.263 0.193 0.129 110 0.070 0.063 0.105 0.076 0.155 0.232 0.168 0.112 115 0.062 0.056 0.093 0.067 0.137 0.205 0.146 0.098 120 0.055 0.049 0.083 0.058 0.121 0.182 0.128 0.085 125 0.049 0.044 0.074 0.051 0.108 0.162 0.113 0.075 Part Number NCPppXM472 NCPppXW472 NCPppXH682 NCPppXW682 NCPppXH103 NCPppXV103 NCPppXH153 NCPppXW153 4.7kΩ 4.7kΩ 6.8kΩ 6.8kΩ 10kΩ 10kΩ 15kΩ 15kΩ Resistance 3950K 3950K B-Constant 3500K 3380K 3950K 3380K 3900K 3380K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Y40 105.705 162.279 133.043 234.787 195.652 328.996 293.478 517.912 Y35 79.126 116.474 100.756 168.515 148.171 237.387 222.256 371.724 Y30 59.794 84.615 77.076 122.422 113.347 173.185 170.021 270.048 Y25 45.630 62.173 59.540 89.953 87.559 127.773 131.338 198.426 Y20 35.144 46.147 46.401 66.766 68.237 95.327 102.355 147.278 Y15 27.303 34.604 36.482 50.066 53.650 71.746 80.474 110.439 Y10 21.377 26.200 28.904 37.906 42.506 54.564 63.759 83.617 Y5 16.869 20.018 23.047 28.963 33.892 41.813 50.838 63.888 0 13.411 15.423 18.509 22.313 27.219 32.330 40.828 49.221 5 10.735 11.984 14.974 17.338 22.021 25.194 33.032 38.245 10 8.653 9.380 12.189 13.571 17.926 19.785 26.888 29.936 15 7.018 7.399 9.978 10.705 14.674 15.651 22.010 23.613 20 5.726 5.877 8.215 8.503 12.081 12.468 18.121 18.756 25 4.700 4.700 6.800 6.800 10.000 10.000 15.000 15.000 30 3.879 3.783 5.654 5.474 8.315 8.072 12.472 12.074 35 3.219 3.064 4.725 4.434 6.948 6.556 10.422 9.780 40 2.685 2.497 3.967 3.613 5.834 5.356 8.751 7.969 45 2.250 2.046 3.344 2.961 4.917 4.401 7.375 6.531 50 1.895 1.686 2.829 2.440 4.161 3.635 6.241 5.382 55 1.604 1.397 2.404 2.022 3.535 3.019 5.302 4.459 60 1.363 1.164 2.050 1.683 3.014 2.521 4.521 3.713 65 1.163 0.974 1.759 1.409 2.586 2.115 3.879 3.108 70 0.996 0.819 1.515 1.185 2.228 1.781 3.341 2.613 75 0.857 0.692 1.309 1.001 1.925 1.509 2.887 2.208 80 0.740 0.587 1.135 0.849 1.669 1.284 2.503 1.873 85 0.641 0.500 0.988 0.724 1.452 1.097 2.178 1.597 90 0.558 0.428 0.862 0.620 1.268 0.941 1.902 1.367 95 0.487 0.368 0.755 0.532 1.110 0.810 1.664 1.174 100 0.426 0.318 0.662 0.459 0.974 0.701 1.461 1.013 105 0.375 0.275 0.583 0.398 0.858 0.608 1.287 0.878 110 0.330 0.239 0.515 0.346 0.758 0.530 1.137 0.763 115 0.292 0.208 0.457 0.302 0.672 0.463 1.007 0.665 120 0.259 0.182 0.406 0.264 0.596 0.406 0.895 0.582 125 0.230 0.160 0.361 0.232 0.531 0.358 0.797 0.511 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en Continued on the following page. 2 15 4 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. 4 Part Number NCPppXH223 NCPppXW223 NCPppWL223 NCPppWB333 NCPppWF333 NCPppWL333 NCPppWB473 NCPppWL473 22kΩ 22kΩ 22kΩ 33kΩ 33kΩ 33kΩ 47kΩ 47kΩ Resistance 3380K 3950K 4485K 4050K 4250K 4485K 4050K 4485K B-Constant Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Y40 759.605 1073.436 1227.263 1451.049 1610.154 1747.920 430.434 2293.249 Y35 545.196 753.900 874.449 1019.238 1130.850 1245.428 325.976 1610.605 Y30 396.070 535.073 630.851 725.084 802.609 898.485 249.364 1143.110 Y25 291.025 383.590 460.457 522.021 575.385 655.802 192.629 819.487 Y20 216.008 277.643 339.797 379.842 416.464 483.954 150.121 593.146 Y15 161.977 202.813 253.363 279.371 304.219 360.850 118.029 433.281 Y10 122.638 149.462 190.766 207.566 224.193 271.697 93.514 319.305 Y5 93.702 111.082 144.964 155.639 166.623 206.463 74.563 237.312 0 72.191 83.233 111.087 117.814 124.850 158.214 59.881 177.816 5 56.093 62.858 85.842 89.925 94.287 122.259 48.446 134.287 10 43.907 47.831 66.861 69.204 71.747 95.227 39.436 102.184 15 34.633 36.664 52.470 53.675 54.996 74.730 32.282 78.327 20 27.509 28.304 41.471 41.937 42.455 59.065 26.577 60.467 25 22.000 22.000 33.000 33.000 33.000 47.000 22.000 47.000 30 17.709 17.214 26.430 26.143 25.822 37.643 18.292 36.776 35 14.344 13.557 21.298 20.845 20.335 30.334 15.285 28.962 40 11.688 10.744 17.266 16.723 16.115 24.591 12.834 22.952 45 9.578 8.566 14.076 13.498 12.849 20.048 10.817 18.301 50 7.894 6.871 11.538 10.954 10.306 16.433 9.154 14.679 55 6.540 5.544 9.506 8.940 8.317 13.539 7.777 11.845 60 5.446 4.498 7.870 7.334 6.748 11.209 6.631 9.610 65 4.559 3.669 6.549 6.046 5.504 9.328 5.690 7.839 70 3.832 3.009 5.475 5.011 4.513 7.798 4.901 6.427 75 3.239 2.479 4.595 4.170 3.718 6.544 4.234 5.296 80 2.748 2.052 3.874 3.487 3.078 5.518 3.671 4.384 85 2.342 1.707 3.282 2.928 2.560 4.674 3.195 3.646 90 2.004 1.426 2.789 2.469 2.139 3.972 2.790 3.046 95 1.722 1.196 2.379 2.091 1.794 3.388 2.441 2.555 100 1.486 1.008 2.038 1.777 1.511 2.902 2.142 2.152 105 1.287 0.852 1.751 1.516 1.278 2.494 1.888 1.820 110 1.119 0.724 1.509 1.298 1.085 2.150 1.668 1.546 115 0.975 0.617 1.306 1.116 0.925 1.860 1.477 1.318 120 0.854 0.528 1.134 0.962 0.792 1.615 1.312 1.128 125 0.750 0.454 0.987 0.832 0.681 1.406 1.169 0.970 Part Number NCPppWD683 NCPppWF683 NCPppWL683 NCPppWF104 NCP18WF104F NCPppWL104 NCPppWL154 NCPppWM154 150kΩ 150kΩ Resistance 68kΩ 100kΩ 68kΩ 68kΩ 100kΩ 100kΩ±1% 4485K 4500K B-Constant 4150K 4485K 4250K 4485K 4250K 4200K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Y40 2735.359 4879.254 7318.881 2990.041 7899.466 3317.893 4397.119 4205.686 Y35 1937.391 3426.818 5140.228 2100.247 5466.118 2330.237 3088.599 2966.436 Y30 1389.345 2432.149 3648.224 1494.113 3834.499 1653.862 2197.225 2118.789 Y25 1008.014 1743.590 2615.385 1075.679 2720.523 1185.641 1581.881 1531.319 Y20 738.978 1262.012 1893.018 782.705 1951.216 858.168 1151.037 1118.422 Y15 547.456 921.875 1382.813 575.674 1415.565 626.875 846.579 825.570 Y10 409.600 679.373 1019.059 427.712 1036.984 461.974 628.988 615.526 Y5 309.217 504.919 757.379 320.710 767.079 343.345 471.632 463.104 0 235.606 378.333 567.499 242.768 572.667 257.266 357.012 351.706 5 180.980 285.717 428.575 185.300 431.264 194.287 272.500 269.305 10 140.139 217.414 326.121 142.603 327.405 147.841 209.710 207.891 15 109.344 166.654 249.981 110.602 250.538 113.325 162.651 161.722 20 85.929 128.653 192.979 86.415 193.166 87.484 127.080 126.723 25 68.000 100.000 150.000 68.000 150.000 68.000 100.000 100.000 30 54.167 78.247 117.370 53.871 117.281 53.208 79.222 79.439 35 43.421 61.622 92.433 42.954 92.293 41.903 63.167 63.509 40 35.016 48.835 73.252 34.460 73.090 33.208 50.677 51.084 45 28.406 38.937 58.406 27.814 58.240 26.477 40.904 41.336 50 23.166 31.231 46.846 22.572 46.665 21.237 33.195 33.628 55 18.997 25.202 37.803 18.422 37.605 17.137 27.091 27.510 60 15.657 20.448 30.671 15.113 30.453 13.904 22.224 22.621 65 12.967 16.679 25.018 12.459 24.804 11.342 18.323 18.692 70 10.794 13.675 20.513 10.325 20.293 9.299 15.184 15.525 75 9.021 11.268 16.902 8.592 16.679 7.662 12.635 12.947 80 7.575 9.329 13.993 7.185 13.776 6.343 10.566 10.849 85 6.387 7.758 11.638 6.033 11.428 5.276 8.873 9.129 90 5.407 6.481 9.721 5.087 9.520 4.407 7.481 7.713 95 4.598 5.437 8.155 4.309 7.966 3.697 6.337 6.546 100 3.922 4.580 6.869 3.661 6.688 3.114 5.384 5.572 105 3.359 3.873 5.810 3.124 5.639 2.634 4.594 4.764 110 2.887 3.289 4.933 2.675 4.772 2.236 3.934 4.087 115 2.489 2.804 4.206 2.299 4.052 1.907 3.380 3.518 120 2.155 2.400 3.601 1.983 3.454 1.632 2.916 3.040 125 1.870 2.064 3.096 1.715 2.955 1.403 2.522 2.634 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en Continued on the following page. 16 3 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R44E.pdf • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value) Continued from the preceding page. Part Number NCPppWL224 NCPppWM224 NCPppWM474 220kΩ 470kΩ Resistance 220kΩ 4500K 4500K B-Constant 4485K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Y40 11585.884 10734.358 24751.661 Y35 8016.973 7539.001 17127.169 Y30 5623.931 5350.729 12014.762 Y25 3990.100 3835.898 8524.305 Y20 2861.784 2776.427 6113.811 Y15 2076.162 2028.126 4435.437 Y10 1520.909 1494.620 3249.216 Y5 1125.049 1110.822 2403.515 0 839.912 832.332 1794.358 5 632.521 628.577 1351.294 10 480.194 478.310 1025.870 15 367.455 366.639 785.018 20 283.310 283.036 605.252 25 220.000 220.000 470.000 30 172.012 172.143 367.480 35 135.364 135.569 289.186 40 107.198 107.436 229.014 45 85.419 85.662 182.485 50 68.441 68.708 146.215 55 55.153 55.444 117.828 60 44.665 44.984 95.420 65 36.379 36.694 77.718 70 29.763 30.085 63.584 75 24.462 24.789 52.260 80 20.205 20.523 43.166 85 16.761 17.068 35.808 90 13.962 14.258 29.828 95 11.684 11.961 24.961 100 9.809 10.075 20.955 105 8.270 8.521 17.668 110 6.998 7.236 14.951 115 5.942 6.169 12.695 120 5.067 5.281 10.824 125 4.334 4.540 9.259 4 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en 4 17 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R44E.pdf • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type !Caution/Notice ■ !Caution (Storage and Operating Conditions) This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics or cause failures and burn-out. 1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) ■ !Caution (Others) 4 Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product. ■ Notice (Storage and Operating Conditions) To keep solderability of product from declining, the following storage condition is recommended. 1. Storage condition: Temperature -10 to +40 degrees C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. ■ Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. ■ Notice (Handling) The ceramic of this product is fragile, and care must be taken not to load an excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping. 18 2. Volatile or flammable gas 3. Dusty conditions 4. Under vacuum, or under high or low pressure 5. Wet or humid locations 6. Places with salt water, oils, chemical liquids or organic solvents 7. Strong vibrations 8. Other places where similar hazardous conditions exist R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type !Caution/Notice ■ Notice (Soldering and Mounting) 1. Mounting Position Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. Component Direction Locate this product horizontal to the direction in which stress acts. Mounting Close to Board Separation Line C Perforation Holes A B Keep this product on the PC Board away from the Separation Line. Worst ← A-C-B-D → Better D Slit 4 2. Allowable Soldering Temperature and Time NCP03/15 Series Allowable Reflow Soldering Temp. and Time 280 Temperature (°C) (a) Solder within the temperature and time combinations indicated by the slanted lines in the following graphs. (b) Excessive soldering conditions may cause dissolution of metallization or deterioration of solder-wetting on the external electrode. (c) In case of repeated soldering, the accumulated soldering time should be within the range shown in the figure below. (For example, Reflow peak temperature: 260°C, twice -> The total accumulated soldering time at 260°C is within 30 seconds.) 270 260 250 240 230 220 0 10 20 30 40 50 Time (sec.) 60 70 80 90 NCP18/21 Series Allowable Reflow Soldering Temp. and Time 280 280 270 270 Temperature (°C) Temperature (°C) Allowable Flow Soldering Temp. and Time 260 250 240 230 220 210 260 250 240 230 220 210 0 10 20 Time (sec.) 30 0 10 20 30 40 50 60 70 80 90 100 110 Time (sec.) Continued on the following page. 1 19 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type !Caution/Notice Continued from the preceding page. 3. Recommended Temperature Profile for Soldering NCP03/15 Series Reflow Soldering Conditions Temperature (°C) (a) Insufficient preheating may cause a crack on ceramic body. The difference between preheating temperature and maximum temperature in the profile shall be 100 °C. (b) Rapid cooling by dipping in solvent or by other means is not recommended. Preheating (in air) Soldering 1-2 min. *20sec. 300 Gradual Cooling (in air) 200 100 0 * In case of repeated soldering, the accumulated soldering time should be within the range shown in the figure 2 above. Preheating: 160±10°C, 1-2 min. Soldering: 240-270°C, 20sec. NCP18/21 Series Flow Soldering Conditions 4 Soldering 300 Gradual Cooling (in air) Temperature (°C) Temperature (°C) Preheating (in air) Reflow Soldering Conditions 200 100 0 1-2 min. Preheating (in air) Soldering 1-2 min. *20sec. 300 Gradual Cooling (in air) 200 100 0 *10sec. Preheating: 160±10°C, 1-2 min. Soldering: 230-270°C, 20sec. Preheating: 160±10°C, 1-2 min. Soldering: 230-260°C, 10sec. 4. Solder and Flux (1) Solder and Paste (a) Reflow Soldering: NCP03/15/18/21 Series Use RA/RMA type or equivalent type of solder paste. For your reference, we are using the solder paste below for any internal tests of this product. •RMA9086 90-4-M20 (Sn:Pb=63wt%:37wt%) (Manufactured by Alpha Metals Japan Ltd.) •M705-221BM5-42-11 (Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%) (Manufactured by Senju Metal Industry Co., Ltd.) (b) Flow Soldering: NCP18/21 Series We are using the solder paste below for any internal tests of this product. •Sn:Pb=63wt%:37wt% •Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt% (2) Flux Use rosin type flux in soldering process. If the flux listed below is used, some problems might be caused in the product characteristics and reliability. Please do not use the following flux. • Strong acidic flux (with halide content exceeding 0.1wt%). • Water-soluble flux (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 5. Cleaning Conditions For removing the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change of the external electrodes' quality. • Please keep mounted parts and a substrate from an occurrence of resonance in ultrasonic cleaning. • Please do not clean the products in the case of using a non-washed type flux. NCP03/15 NCP18/21 Solvent Isopropyl Alcohol Isopropyl Alcohol Dipping Cleaning Less than 5 minutes at room temp. or less than 2 minutes at 40°C max. Less than 5 minutes at room temp. or less than 2 minutes at 40°C max. Less than 5 minutes and 20W/r Ultrasonic Cleaning Frequency of 28kHz to 40kHz Less than 1 minute and 20W/r Frequency of several 10kHz to 100kHz 6. Drying After cleaning, promptly dry this product. Continued on the following page. 20 2 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type !Caution/Notice Continued from the preceding page. 7. Printing Conditions of Solder Paste The amount of solder is critical. Standard height of fillet is shown in the table below. Too much soldering may cause mechanical stress, resulting in cracking, mechanical and/or electronic damage. Reference: Optimum Solder Amount E T Electrode Solder Solder Part Number The Solder Paste Thickness T 100µm 1/3EVTVE NCP03 NCP15 150µm 1/3EVTVE NCP18/NCP21 200µm 0.2mmVTVE 4 8. Adhesive Application and Curing Thin or insufficient adhesive may result in loose component contact with land during flow soldering. Low viscosity adhesive causes chips to slip after mounting. 3 21 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type Package Minimum Quantity Guide Quantity (pcs.) Part Number Paper Tape NCP03 15,000 NCP15 10,000 NCP18 4,000 NCP21 - Embossed Tape 4,000 Tape Carrier Packaging 1. Dimensions of Reel 2.0±0.5 ø60 W1.0 Y0 ø13.0±0.2 ø21.0±0.8 4 9.0 W1.0 Y0 ø180 W0 Y1.5 13.0±1.0 (in mm) 2. Taping Method (1) A tape in a reel contains Leader unit and Trailer unit where products are not packed. (Please refer to the figure at the right.) Leader Unit 190-250 210-250 40 min. Trailer Unit Vacant Section Top Tape alone Cover Tape alone (2) The top and base tapes or, plastic and cover tape are not stuck at the first five pitches minimum. Chip-mounting Unit (3) A label should be attached on the reel. (MURATA's part number, inspection number and quantity should be marked on the label.) (4) Taping reels are packed in a package. Direction of Feed (in mm) Continued on the following page. 1 22 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type Package Continued from the preceding page. 3. Paper Tape (NCP03/15/18 Series) 8.0±0.3 0.8 max. 3.5±0.05 0.38∗ Direction of Feed ø1.5+0.1/–0 1.15∗ 8.0±0.3 0.68∗ 2.0±0.05 4.0±0.1 0.5 max. 3.5±0.05 ø1.5+0.1/–0 1.75±0.1 2.0±0.05 4.0±0.1 1.75±0.1 NCP15 Series NCP03 Series 0.65∗ ∗ Reference Value Direction of Feed ∗ Reference Value 1.1 max. 1.85∗ 4 8.0±0.3 ø1.5+0.1/–0 3.5±0.05 2.0±0.05 4.0±0.1 4.0±0.1 1.75±0.1 NCP18 Series 1.05∗ Direction of Feed ∗ Reference Value (in mm) (1) Other Conditions (a) Packaging Products are packaged in the cavity of the base tape and sealed by top tape and bottom tape. (b) Tape Top tape and bottom tape have no joints and products are packaged and sealed in the cavity of the base tape, continuously. (2) Peeling Force of Top Tape 165-180 ° F ∗ 1 Peeling angle: 165 to 180 degrees against the fixed surface of tape. ∗ 2 Peeling speed: 300mm/min. ∗ 3 Peeling force: 0.1 - 0.6N (3) Pull Strength Pull strength of top tape is specified at 10N minimum. Pull strength of bottom tape should be specified 5N minimum. Continued on the following page. 232 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temp. Sensor and Compensation Chip Type Package Continued from the preceding page. 4. Embossed Tape (NCP21 Series) 2.0±0.05 4.0±0.1 4.0±0.1 Products are packaged in each cavity of the Embossed tape and sealed by Cover tape. +0.1 φ1.5 -1 2.25∗ Cover tape has no joints. 3.5±0.05 (b) Tape φ1.0 +0.3 -0 1.05 0.2 8.0±0.3 (a) Packaging 1.75±0.1 (1) Other Conditions 1.45∗ ∗ Reference Value Direction of Feed (in mm) (2) Peeling Force of Cover Tape 165-180 ° F 4 ∗ 1 Peeling angle: 165 to 180 degrees against the fixed surface of tape. ∗ 2 Peeling speed: 300mm/min. ∗ 3 Peeling force: 0.1 - 0.7N (3) Tape Strength Pull strength of Embossed tape and Cover tape should be specified 10N minimum. 3 24 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 NTC Thermistors Temperature Sensor Thermo String Type 1.2±0.4 1.2±0.4 This product is a small flexible lead type NTC Thermistor with a small head and a thin lead wire. 25 to 100±2 110 to 150±3 ■ Features The full length 25mm, 30 to 150mm Interval 10mm. B-Constant (25-50°C) (K) 1.2±0.4 25 to 100±2 110 to 150±3 1.2±0.4 5 ø0.30±0.05 3+2/-1 1. Temperature compensation for transistor, IC and crystal oscillator in mobile communications 2. Temperature sensor for rechargeable batteries 3. Temperature compensation of LCD 4. Temperature compensation in general use of electric circuits Resistance (25°C) (ohm) (in mm) NXFT15_1B Type(twist) ■ Applications Part Number ø0.30±0.05 3+2/-1 1. High accuracy and highly sensitive temperature sensing is mode possible by the small size and high accuracy NTC Thermistor. 2. Narrow space temperature sensing is made possible by the small sensing head and the thin lead wire. 3. Flexibility and a wide variety of lengths (25 mm to 150mm) enables the design of flexible temperature sensing architectures. 4. This product is compatible with our 0402 (EIA) size chip Thermistor. 5. Excellent long-term aging stability 6. This is halogen free product. * * Cl= max.900ppm, Br=max.900ppm and Cl+Br=max.1500ppm 7. NXFT series are recognized by UL/cUL (UL1434, File No. E137188). The full length 25mm, 30 to 150mm Interval 10mm. (in mm) NXFT15_2B Type(without twist) B-Constant B-Constant B-Constant (25-80°C) (25-85°C) (25-100°C) (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) Operating Current for Sensor (25°C) (mA) Rated Electric Typical Dissipation Thermal Time Power (25°C) Constant (25°C) Constant (mW) (mW/°C) (25°C) (s) NXFT15XH103FApBppp 10k ±1% 3380 ±1% 3423 3431 3452 0.12 7.5 1.5 4 NXFT15WB473FApBppp 47k ±1% 4050 ±1% 4091 4097 4114 0.06 7.5 1.5 4 NXFT15WF104FApBppp 100k ±1% 4250 ±1% 4303 4311 4334 0.04 7.5 1.5 4 p is the filled with lead shape (1: twist, 2: without twist). ppp is the filled with Total-length codes. (25mm, 30 to 150mm interval 10mm, ex. 050=50mm) Operating Current for Sensor rises Thermistor's temperature by 0.1°C Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 30°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C 25 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temperature Sensor Thermo String Type Specifications and Test Methods No. Item 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 Humidity Storage Test 4 Temperature Cycle 5 High Temperature Load 6 Insulation Break down Voltage Specifications · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. Test Methods 125±2°C in air, for 1000 +48/-0 hours without loading. -40 +0/-3°C in air, for 1000 +48/-0 hours without loading. 60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without loading. · Resistance (R25°C) fluctuation rate: less than ±2%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. -40 +0/-3°C, 30 minutes in air +25±2°C, 10 to 15 minutes in air +125±2°C, 30 minutes in air + 25 +2/-0°C, 10 to 15 minutes in air (1 cycle) Continuous 100 cycles, without loading. 85±2°C in air, with 'Operating Current for Sensor' for 1000 +48/-0 hrs. · No damage electrical characteristics at DC100 V, 1 min. 2mm length of coating resin from the top of Thermistor is to be dipped into beads of lead (Pb), and DC100V 1 minute is applied to circuit between beads of lead (Pb) and lead wire. Both lead wires are dipped into 350±10°C solder for 3.5±0.5 seconds, or 260±5°C solder for 10±1 seconds according to Fig-1 (solder <JIS Z 3282 H60A>). 7 Resistance to Soldering Heat · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. 5 1 to 2mm Solder Fig-1 8 Solderability More than 90% of lead wire surface shall be covered by solder. Both lead wires are dipped into flux (25wt% colophony <JIS K 5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds. Then both lead wires are dipped into 235±5°C solder <JIS Z 3282 H60A> for 2±0.5 seconds according to Fig-1. The lead wire shall be inserted in a ø1.0mm hole until resin part contacts with a substrate as shown in fig.-2, and 1N force for 10 seconds shall be applied to the lead wire. 9 Lead Wire Pull Strength · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. 1N (10 sec.) Fig-2 Hold the lead wires as in Fig-3. Bend by 90 degrees and again bend back to the initial position. Then bend to the other side by 90 degrees and again bend back to the initial position. After bending process, 10N force for 3 seconds shall be applied to the lead wire. 10 Lead Wire Bending Strength · Lead wire does not break. 10N (3 sec.) Fig-3 * · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C -50°C. · After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure). Continued on the following page. 26 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temperature Sensor Thermo String Type Specifications and Test Methods Continued from the preceding page. No. Item Specifications Test Methods NTC Thermistor shall be dropped without any force onto concrete floor from 1 meter height one time. 11 Free Fall NTC Thermistor shall be fixed to the vibration test equipment. Vibration of total 1.5 mm amplitude, Frequency sequence of 10Hz - 55Hz - 10Hz in 1 minute, shall be applied for right angled 3 directions for each 2 hours duration. 12 Vibration · Resistance (R25°C) fluctuation rate: less than ±1%. · B-Constant (B25/50°C) fluctuation rate: less than ±1%. · No visible damage at resin part. Mount Oscillating Direction Z Solder is attached from the reverse side. Oscillating Direction Y Oscillating Direction X * · R25 is zero-power resistance at 25°C. · B25/50 is calculated by zero-power resistance of Thermistor in 25°C -50°C. · After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure). 5 27 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 NTC Thermistors Temperature Sensor Lead Type 3.0 max. (∗3.3 max.) 1.8 max. (∗2.5 max.) 6.0 max. This product is a sensor type NTC Thermistor developed by our unique ceramic technology and automatic assemble, to be used in normal temperature ranges. Epoxy Resin 31±1 ■ Features 1. High accuracy of B-Constant tolerance +/-0.5% +/-1% of resistance and +/-0.5% of B-Constant is realized due to technical advantages of the material and manufacturing process. 2. Quick response This product provides faster response time due to its smaller size. 3. Taping type is available. 4. Strong lead strength Original lead-wiring technique assures reliable connection. It can be formed and bent flexibly according to the mounting conditions. Solder Plated Copper Ply Wire ø0.4±0.03 2.5±1.0 ∗ Applicable to NTSA0XM202, NTSA0WB203 and NTSA0WC303 Types. (in mm) ■ Applications 1. Rechargeable batteries 2. Battery charging circuits 3. Printer heads 4. DC fan motors 5. Home appliance equipment Resistance (25°C) (ohm) B-Constant (25-50°C) (K) NTSA0XM202pE1B0 2.0k 3500 ±0.5% 3523 3526 3543 1.05 21 2.1 7 NTSA0XR502pE1B0 5.0k 3700 ±1% 3727 3738 3760 0.68 15 1.5 7 NTSA0XH103pE1B0 10k 3380 ±0.5% 3428 3434 3455 0.38 15 1.5 7 NTSA0XV103pE1B0 10k 3900 ±0.5% 3930 3934 3944 0.46 15 1.5 7 NTSA0WB203pE1B0 20k 4050 ±1% 4078 4080 4096 0.31 21 2.1 7 NTSA0WC303pE1B0 30k 4100 ±1% 4128 4130 4147 0.26 21 2.1 7 NTSA0WD503pE1B0 50k 4150 ±1% 4205 4213 4234 0.20 15 1.5 7 NTSA0WF104pE1B0 100k 4250 ±1% 4303 4311 4334 0.14 15 1.5 7 6 Part Number B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation Thermal Time (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) Constant (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) (25°C) (s) p is filled with resistance tolerance codes (F: ±1%, E: ±3%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 35°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C Taping type of part numbers with "N6A0" is available (Lead Spacing=5mm, Lead Diameter=ø0.5mm). 28 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 NTC Thermistors Temperature Sensor Lead Insulation Type 3.0 max. (∗3.8 max.) 2.0 max. (∗2.5 max.) 27.0±2.0 (Coating Area) This product is a sensor type NTC Thermistor developed by our unique ceramic technology and automatic assemble, to be used in normal temperature ranges. 2.5 −0.5 0.60-0.95 3±1.5 +1.5 1. Electric insulation on lead wire 2. Excellent bending resistance due to suitable hardness of surface coating 3. Easy handling due to most suitable hardness of surface of coating 4. High accuracy of B-Constant tolerance +/-0.5% +/-1% of resistance and +/-0.5% of B-Constant is realized due to technical advantages of the material and manufacturing processes. 5±1 ■ Features ø0.4±0.03 (Solder Plated Copper Ply Wire) NTSD0 Series ∗ Applicable to NTSD0XM202, NTSD0WB203 and NTSD0WC303 Types. 3.0 max. (∗3.8 max.) (in mm) 2.0 max. (∗2.5 max.) Epoxy Resin ø0.46±0.03 Polyurethane Wire +1.5 1. Rechargeable batteries 2. Battery charging circuits 3. Printer heads 4. DC fan motors 5. Home appliance equipment 2.5-0.5 2.5±1.2 L ±2.0 ■ Applications ø0.45±0.05 Sn-Ag Solder Copper Wire ∗ NTSD1XM202/NTSD1WB203/NTSD1WC303 Types Type NTSD1_FPB30 NTSD1_FPB40 NTSD1_FPB50 NTSD1 Series (0.8) (in mm) L (mm) 30 40 50 NTSD0 Series Resistance (25°C) (ohm) B-Constant (25-50°C) (K) NTSD0XM202pE1B0 2.0k 3500 ±0.5% 3523 3526 3543 1.05 21 2.1 7 NTSD0XR502pE1B0 5.0k 3700 ±1% 3727 3738 3760 0.68 15 1.5 7 NTSD0XH103pE1B0 10k 3380 ±0.5% 3428 3434 3455 0.38 15 1.5 7 NTSD0XV103pE1B0 10k 3900 ±0.5% 3930 3934 3944 0.46 15 1.5 7 NTSD0WB203pE1B0 20k 4050 ±1% 4078 4080 4096 0.31 21 2.1 7 NTSD0WC303pE1B0 30k 4100 ±1% 4128 4130 4147 0.26 21 2.1 7 NTSD0WD503pE1B0 50k 4150 ±1% 4205 4213 4234 0.20 15 1.5 7 NTSD0WF104pE1B0 100k 4250 ±1% 4303 4311 4334 0.14 15 1.5 7 Part Number B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation Thermal Time (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) Constant (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) (25°C) (s) 7 p is filled with resistance tolerance codes (F: ±1%, E: ±3%). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 35°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C NTSD1 Series Part Number Resistance (25°C) (ohm) B-Constant (25-50°C) (K) B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation Thermal Time (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) Constant (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) (25°C) (s) NTSD1XM202FPBpp 2.0k ±1% 3500 ±0.5% 3523 3526 3543 1.05 21 2.1 7 NTSD1XR502FPBpp 5.0k ±1% 3727 3738 3760 0.68 15 1.5 7 NTSD1XH103FPBpp 10k ±1% 3380 ±0.5% 3428 3434 3455 0.38 15 1.5 7 NTSD1XV103FPBpp 10k ±1% 3900 ±0.5% 3930 3934 3944 0.46 15 1.5 7 NTSD1WB203FPBpp 20k ±1% 4050 ±1% 4078 4080 4096 0.31 21 2.1 7 NTSD1WC303FPBpp 30k ±1% 4100 ±1% 4128 4130 4147 0.26 21 2.1 7 3700 ±1% Continued on the following page. 29 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Continued from the preceding page. Resistance (25°C) (ohm) B-Constant (25-50°C) (K) NTSD1WD503FPBpp 50k ±1% 4150 ±1% 4205 4213 4234 0.20 15 1.5 7 NTSD1WF104FPBpp 100k ±1% 4250 ±1% 4303 4311 4334 0.14 15 1.5 7 Part Number B-Constant B-Constant B-Constant Permissive Operating Rated Electric Typical Dissipation Thermal Time (25-80°C) (25-85°C) (25-100°C) Current (25°C) Power (25°C) Constant (25°C) Constant (Reference Value) (K) (Reference Value) (K) (Reference Value) (K) (mA) (mW) (mW/°C) (25°C) (s) pp is filled with Total-length codes (30, 40, 50). Rated Electric Power shows the required electric power that causes Thermistor's temperature to rise to 35°C by self heating, at ambient temperature of 25 °C. Operating Temperature Range: -40°C to +125°C ■ Temperature Tolerance - Temperature Characteristics Resistance Tolerance: +/-1% B-Constant Tolerance: +/-1% Resistance Tolerance: +/-1% B-Constant Tolerance: +/-0.5% 2.0 1.0 0 -50 7 30 3.0 Temperature Tolerance (±°C) Temperature Tolerance (±°C) 3.0 0 50 Temperature (°C) 100 150 2.0 1.0 0 -50 0 50 Temperature (°C) 100 150 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R44E.pdf • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temperature Sensor Temperature Characteristics (Center Value) Part Number NXFpXH103 NXFpWB473 NXFpWF104 10kΩ 47kΩ 100kΩ Resistance 3380K 4050K 4250K B-Constant Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Y40 197.388 1690.590 4221.280 Y35 149.395 1215.320 2995.040 Y30 114.345 882.908 2147.000 Y25 88.381 647.911 1554.600 Y20 68.915 480.069 1136.690 Y15 54.166 359.009 839.019 Y10 42.889 270.868 624.987 Y5 34.196 206.113 469.678 0 27.445 158.126 355.975 5 22.165 122.267 272.011 10 18.010 95.256 209.489 15 14.720 74.754 162.559 20 12.099 59.075 127.057 25 10.000 47.000 100.000 30 8.309 37.636 79.222 35 6.939 30.326 63.167 40 5.824 24.583 50.677 45 4.911 20.043 40.904 50 4.160 16.433 33.195 55 3.539 13.545 27.091 60 3.024 11.223 22.224 65 2.593 9.345 18.323 70 2.233 7.818 15.184 75 1.929 6.571 12.635 80 1.673 5.548 10.566 85 1.455 4.704 8.873 90 1.270 4.004 7.481 95 1.112 3.422 6.337 100 0.976 2.936 5.384 105 0.860 2.528 4.594 110 0.759 2.184 3.934 115 0.673 1.893 3.380 120 0.598 1.646 2.916 125 0.532 1.436 2.522 Part Number NTSppXM202 NTSppXR502 NTSppXH103 NTSppXV103 NTSppWB203 NTSppWC303 NTSppWD503 NTSppWF104 Resistance 20kΩ 30kΩ 50kΩ 100kΩ 2.0kΩ 5.0kΩ 10kΩ 10kΩ B-Constant 3500K 3700K 3380K 3900K 4050K 4100K 4150K 4250K Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Y40 733.007 44.657 1149.500 123.484 1948.575 195.652 4256.752 347.808 Y35 524.831 33.505 819.651 92.295 1387.289 148.171 3005.888 248.591 Y30 380.184 25.388 591.391 69.614 999.456 113.347 2148.514 179.973 Y25 277.845 19.402 430.529 52.860 728.895 87.559 1555.020 131.832 Y20 205.260 14.961 316.870 40.480 537.039 68.237 1137.312 97.679 Y15 153.642 11.644 236.337 31.275 399.167 53.650 839.314 73.119 Y10 116.016 9.133 177.842 24.339 299.469 42.506 625.338 55.301 Y5 88.125 7.198 134.630 19.154 226.186 33.892 469.127 42.257 0 67.522 5.716 102.816 15.148 172.393 27.219 355.224 32.582 5 52.168 4.571 79.183 11.964 132.857 22.021 272.045 25.324 10 40.617 3.682 61.460 9.520 103.089 17.926 209.803 19.847 15 31.847 2.987 48.045 7.624 80.430 14.674 162.713 15.679 20 25.151 2.437 37.834 6.160 63.201 12.081 127.117 12.478 25 20.000 2.000 30.000 5.000 50.000 10.000 100.000 10.000 30 16.014 1.651 23.955 4.082 39.825 8.315 79.215 8.068 35 12.902 1.371 19.249 3.354 31.918 6.948 63.150 6.552 40 10.457 1.143 15.560 2.773 25.733 5.834 50.649 5.353 45 8.527 0.958 12.657 2.299 20.877 4.917 40.885 4.399 50 6.993 0.807 10.354 1.914 17.034 4.161 33.195 3.635 55 5.771 0.683 8.525 1.607 13.929 3.535 27.014 3.020 60 4.789 0.582 7.058 1.356 11.439 3.014 22.079 2.521 65 3.992 0.497 5.869 1.149 9.485 2.586 18.226 2.115 70 3.343 0.426 4.905 0.978 7.906 2.228 15.124 1.783 75 2.809 0.367 4.113 0.834 6.614 1.925 12.598 1.510 80 2.376 0.318 3.472 0.714 5.558 1.669 10.542 1.284 85 2.020 0.276 2.945 0.612 4.686 1.452 8.852 1.096 90 1.724 0.240 2.509 0.527 3.967 1.268 7.463 0.939 95 1.476 0.210 2.143 0.456 3.373 1.110 6.321 0.808 100 1.264 0.183 1.832 0.396 2.878 0.974 5.374 0.698 105 1.085 0.161 1.571 0.345 2.465 0.858 4.585 0.605 110 0.935 0.142 1.350 0.302 2.118 0.758 3.925 0.527 115 0.812 0.125 1.171 0.264 1.828 0.671 3.376 0.460 120 0.708 0.111 1.019 0.232 1.583 0.596 2.913 0.403 125 0.617 0.099 0.886 0.205 1.374 0.531 2.520 0.354 Detailed Resistance - Temperature Tables are downloadable from the following URL. http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en 1 31 7 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R44E.pdf • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temperature Sensor Thermo String Type/Lead Type !Caution/Notice ■ !Caution (Storage and Operating Conditions) This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics or cause failures and burn-out. 1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) 2. Volatile or flammable gas 3. Dusty conditions 4. Under vacuum, or under high or low pressure 5. Wet or humid locations 6. Places with salt water, oils, chemical liquids or organic solvents 7. Strong vibrations 8. Other places where similar hazardous conditions exist ■ !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product. ■ Notice (Storage and Operating Conditions) To keep solderability of product from declining, the following storage condition is recommended. 1. Storage condition: Temperature -10 to +40 degrees C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. ■ Notice (Rating) 7 Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. ■ Notice (Soldering and Mounting) NTS Series 1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down. 2. Do not touch the body with soldering iron. The soldering point should be min. 5mm away from the root of lead wire. 32 3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent. 4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R44E.pdf • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temperature Sensor Thermo String Type/Lead Type !Caution/Notice ■ Notice (Soldering and Mounting) NXF Series Please notice as shown below when you mount this product. 1. When you solder this product, do not melt the solder in resin head. If you melt the solder in resin head, there is the possibility of breaks in the wire, shorts and breaks of the lead insulation. In case you cut the lead wire of this product less than 20mm from resin head, the heat of melted solder at lead wire edge is propagated easily to the resin head along the lead wire. 2. Do not touch the resin head directly with solder iron. It may cause the melting of solder in resin head. 3. Do not separate the parallel lead wires 10mm or less from the resin head, when you separate parallel lead wires. 4. If you mold by resin this product, please evaluate the quality before you use it. 5. Do not bend the lead wire radius 1mm or less when you bend the lead wire. ■ Notice (Handling) 1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to cause a shock while handling. Such forces may cause cracking or chipping. 2. Do not apply excessive force to the lead. Otherwise, it may cause the junction between lead and element to break or crack. Holding element by side lead wire is recommended when lead wire is bent or cut. 7 33 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Temperature Sensor Thermo String Type/Lead Type Package Minimum Order Quantity Ammo Pack Taping Bulk Part Number Minimum Quantity (pcs.) Part Number 1,000 - NXFT Minimum Quantity (pcs.) - NTSA_E1B0 500 NTSD0 500 - - NTSD1_30 500 - - NTSD1_40 200 - - NTSD1_50 200 - - NTSA_N6A0 3,000 Taping Dimensions (NTSA_N6A0 Series) ∆S P P2 ∆h2 ∆h1 T D e H2 P1 ød W2 F H0 L W0 W1 W t2 I P0 Item 7 t1 øD0 Code Dimensions (mm) Pitch of Component P 12.7 Pitch of Sprocket Hole P0 12.7±0.3 Lead Spacing F 5.0+0.8/–0.2 Length from Hole Center to Component Center P2 6.35±1.3 Length from Hole Center to Lead P1 3.85±0.8 Body Diameter D 3.5 max. Deviation along Tape, Left or Right ∆S 0±2.0 Carrier Tape Width W 18.0±0.5 Position of Sprocket Hole W1 9.0±0.5 Lead Distance between Reference and Bottom Planes H0 16.0±1.0 Height of Component H2 4.0 max. I +0.5 to –1.0 Protrusion Length Diameter of Sprocket Hole Lead Diameter D0 4.0±0.1 d 0.50±0.03 Total Tape Thickness t1 0.6±0.3 Total Thickness, Tape and Lead Wire t2 1.6 max. ∆h1, ∆h2 1.0 max. L 11.0+0/–2.0 Hold down Tape Width W0 11.0 min. Hold down Tape Position W2 1.5±1.5 Coating Extension on Lead e Up to the crimp point Body Thickness T 2.6 max. Deviation across Tape Portion to Cut in Case of Defect (in mm) 34 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 NTC Thermistors Inrush Current Suppression Lead Type NTPAN : 23.0 max. NTPAJ : 20.0 max. ■ Features Coating Extension on Lead : to line A A 3.5±1.0 1. Lead is not contained in the ceramic element, the terminations, the solder for inner connection or the coating resin. 2. Most suitable for power supplies of less than 100W 3. Excellent recovery characteristics due to resin coating with excellent heat characteristics 4. Highly reliable 5.5 max. 10.0 max. This product effectively suppresses surge currents which are generated when switching power regulators are turned on. NTPAN/NTPAJ Series ø0.8±0.05 Sn plated Cu wire 10.0±1.5 (in mm) NTPAD : 16.0 max. NTPAA : 12.0 max. ■ Applications 10.0 max. 1. Switching power supplies 2. CRT monitors 3. Televisions 4. VCR Power supplies 5. Other power circuits 5.5 max. 5.0 max. Coating Extension on Lead : to line A 3.5±1.0 A NTPAD/NTPAA Series ø0.8±0.05 Sn plated Cu wire 7.5±1.5 (in mm) 5.0 max. 6.0 max. NTPA9 : 11.0 max. NTPA7 : 9.0 max. Coating Extension on Lead : to line A 3.5±1.0 A NTPA7/NTPA9 Series ø0.6±0.05 Sn plated Cu wire 5.0±1.5 (in mm) Resistance (25°C) (ohm) Permissible Max. Current (25°C) (A) Permissible Max. Current (55°C) (A) Thermal Time Constant (25°C) (s) Thermal Dissipation Constant (25°C) (mW/°C) NTPAN3R0LDKB0 3.0 ±15% 5.4 4.7 135 26.8 NTPAN4R0LDKB0 4.0 ±15% 4.7 4.1 130 26.8 NTPAN6R0LDKB0 6.0 ±15% 3.9 3.4 130 26.8 NTPAJ4R0LDKB0 4.0 ±15% 4.0 3.5 125 21.8 NTPAJ6R0LDKB0 6.0 ±15% 3.4 2.9 125 21.8 NTPAJ8R0LDKB0 8.0 ±15% 3.0 2.6 130 21.8 NTPAJ100LDKB0 10.0 ±15% 2.6 2.2 130 21.8 NTPAD3R9LDNB0 3.9 ±15% 3.3 2.9 65 18.2 NTPAD5R1LDNB0 5.1 ±15% 3.0 2.6 85 18.8 NTPAD8R0LDNB0 8.0 ±15% 2.7 2.3 65 18.7 NTPAD160LDNB0 16.0 ±15% 2.0 1.7 100 19.1 NTPAA2R2LDNB0 2.2 ±15% 3.7 3.2 70 13.5 Part Number Continued on the following page. 35 8 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Continued from the preceding page. Resistance (25°C) (ohm) Permissible Max. Current (25°C) (A) Permissible Max. Current (55°C) (A) Thermal Time Constant (25°C) (s) Thermal Dissipation Constant (25°C) (mW/°C) NTPAA3R9LDNB0 3.9 ±15% 2.7 2.3 70 13.5 NTPAA5R1LDNB0 5.1 ±15% 2.5 2.2 70 13.5 NTPAA8R2LDNB0 8.2 ±15% 2.0 1.7 70 13.5 NTPAA100LDNB0 10.0 ±15% 1.7 1.5 70 13.5 NTPA9160LBMB0 16.0 ±15% 1.4 1.2 65 11.6 NTPA74R0LBMB0 4.0 ±15% 2.3 2.0 40 9.4 NTPA75R0LBMB0 5.0 ±15% 1.9 1.6 40 9.4 NTPA78R0LBMB0 8.0 ±15% 1.7 1.5 40 9.5 NTPA7100LBMB0 10.0 ±15% 1.4 1.2 40 9.5 NTPA7160LBMB0 16.0 ±15% 1.2 1.0 40 9.9 NTPA7220LBMB0 22.0 ±15% 1.0 0.88 40 9.1 Part Number NTPAD/NTPAA/NTPA9/NTPA7 series are also availabe on tape. The final alphabet of the part number should be "DNB0=>D6A0", "BNB0 =>B1A0". Operating Temperature Range: -20°C to +160°C ■ Permissible Electrolytic Capacitor Voltage (AC) 100Vrms 120Vrms 132Vrms 220Vrms 240Vrms 264Vrms NTPAN 8600µF 5972µF 4936µF 1777µF 1493µF 1234µF NTPAJ 5000µF 3472µF 2870µF 1033µF 868µF 717µF NTPAD 2700µF 1875µF 1550µF 558µF 469µF 387µF NTPAA 1400µF 972µF 803µF 289µF 243µF 201µF NTPA9 800µF 556µF 459µF 165µF 139µF 115µF 700µF 486µF 402µF 145µF 122µF 100µF 570µF 396µF 327µF 118µF 99µF 82µF 400µF 278µF 230µF 83µF 69µF 57µF Part Number NTPA74R0 NTPA75R0 NTPA78R0 NTPA7100 NTPA7160 NTPA7220 ■ Application Circuit ■ Determination of Allowable Current 1.0 −t˚ + − Max. Current Ratio NTC 0.5 0 8 36 20 40 60 80 100 Ambient Temperature (˚C) 120 140 160 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) ■ NTPAN3R0L Type ■ NTPAN4R0L Type Ta=25˚C Ta=25˚C 1 100 0.1 0.1 1 10 1 1 100 0.1 0.01 0.01 10 0.1 Current (A) Current (A) ■ NTPAN6R0L Type ■ NTPAJ4R0L Type Ta=25˚C Ta=25˚C 1 100 0.1 10 0.1 1 10 1 1000 Resistance Ratio Thermistor's Temperature (˚C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (˚C) 10 1 100 0.1 0.01 0.01 10 0.1 Current (A) ■ NTPAJ8R0L Type Ta=25˚C Ta=25˚C 1000 1 100 0.1 10 0.1 1 Current (A) 1 10 1000 Resistance Ratio Thermistor's Temperature (˚C) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (˚C) 10 Thermistor's Temperature (˚C) 10 Resistance Ratio (Rt/R25) 1 10 1 Current (A) ■ NTPAJ6R0L Type 0.01 0.01 Thermistor's Temperature (˚C) 1000 Thermistor's Temperature (˚C) 10 0.01 0.01 1 10 1 1 100 0.1 0.01 0.01 10 0.1 1 Thermistor's Temperature (˚C) 0.01 0.01 10 1000 Resistance Ratio Thermistor's Temperature (˚C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (˚C) 10 Thermistor's Temperature (˚C) 1000 Thermistor's Temperature (˚C) 10 1 10 8 Current (A) Continued on the following page. 37 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) Continued from the preceding page. ■ NTPAJ100L Type ■ NTPAD3R9L Type Ta=25˚C Ta=25˚C 1 100 0.1 0.1 1 10 1 1 100 0.1 0.01 0.01 10 0.1 Current (A) Current (A) ■ NTPAD5R1L Type ■ NTPAD8R0L Type Ta=25˚C Ta=25˚C 1 100 0.1 10 0.1 1 10 1 1000 Resistance Ratio Thermistor's Temperature (˚C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (˚C) 10 1 100 0.1 0.01 0.01 10 0.1 Current (A) ■ NTPAA2R2L Type Ta=25˚C Ta=25˚C 1000 1 100 0.1 10 0.1 1 Current (A) 1 10 1000 Resistance Ratio Thermistor's Temperature (˚C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (˚C) 10 Thermistor's Temperature (˚C) 10 0.01 0.01 1 10 1 Current (A) ■ NTPAD160L Type 8 1 100 0.1 0.01 0.01 10 0.1 1 1 10 Current (A) Continued on the following page. 38 Thermistor's Temperature (˚C) 1000 Thermistor's Temperature (˚C) 10 0.01 0.01 1 10 1 Thermistor's Temperature (˚C) 0.01 0.01 10 1000 Resistance Ratio Thermistor's Temperature (˚C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (˚C) 10 Thermistor's Temperature (˚C) 1000 Thermistor's Temperature (˚C) 10 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) Continued from the preceding page. ■ NTPAA3R9L Type ■ NTPAA5R1L Type Ta=25˚C Ta=25˚C 1000 100 0.1 10 0.01 0.01 0.1 1 10 1 1 Thermistor's Temperature (˚C) 1 1000 Resistance Ratio Thermistor's Temperature (˚C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (˚C) 10 Thermistor's Temperature (˚C) 10 100 0.1 10 0.01 0.01 0.1 Current (A) 1 10 1 Current (A) ■ NTPAA8R2L Type ■ NTPAA100L Type Ta=25˚C 1 100 0.1 10 0.01 0.01 0.1 1 100 0.1 0.01 0.01 1 10 1 1000 Resistance Ratio Thermistor's Temperature Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (˚C) Ta=25°C 10 10 Thermistor's temperature (˚C) 1000 Thermistor's Temperature (˚C) 10 1 0.1 1 10 Current (A) Current (A) ■ NTPA9160L Type ■ NTPA74R0L Type Ta=25˚C 0.1 0.01 0.01 10 1 0.1 1 Current (A) 10 1 100 0.1 0.01 0.01 10 0.1 1 Thermistor's Temperature (˚C) 100 1000 Resistance Ratio Thermistor's Temperature (˚C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature 1 10 1000 Thermistor's temperature (˚C) Ta=25°C 10 1 10 8 Current (A) Continued on the following page. 39 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical) Continued from the preceding page. ■ NTPA75R0L Type ■ NTPA78R0L Type Ta=25˚C Ta=25˚C 100 0.1 10 1 10 100 0.1 0.01 0.01 1 0.1 1 10 0.1 Current (A) ■ NTPA7160L Type Ta=25˚C Ta=25˚C 100 10 0.1 1 10 Current (A) Ta=25˚C 1000 Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (˚C) 1 100 0.1 10 1 Current (A) 40 1 10 Thermistor's Temperature (˚C) 10 0.1 10 0.1 1 Current (A) ■ NTPA7220L Type 0.01 0.01 100 0.1 0.01 0.01 1 0.1 1 1 10 Thermistor's Temperature (˚C) 1 1000 Resistance Ratio Thermistor's Temperature (˚C) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (˚C) Resistance Ratio (Rt/R25) 10 1000 Thermistor's Temperature (˚C) 10 8 1 10 1 Current (A) ■ NTPA7100L Type 0.01 0.01 Thermistor's Temperature (˚C) 1 1000 Resistance Ratio Thermistor's Temperature (˚C) Resistance Ratio (Rt/R25) Resistance Ratio (Rt/R25) Resistance Ratio Thermistor's Temperature (˚C) 0.01 0.01 10 1000 Thermistor's Temperature (˚C) 10 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R44E.pdf • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Inrush Current Suppression Lead Type !Caution/Notice ■ !Caution (Storage and Operating Conditions) 1. This product is designed for the Switching Power Supply with smoothing capacitors. Other applications of this product may result in fire. 2. Use this product within the specified maximum current. Otherwise it may catch fire in the worst case. 3. Use this product with smoothing capacitor within the specified maximum capacitance value. Otherwise it may catch fire in the worst case. 4. This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all of these factors can deteriorate the product characteristics causing failure and burn-out. (1) Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) Volatile or flammable gas (3) Dusty conditions (4) Under high or low pressure (5) Wet or humid conditions (6) Near with salt water, oils, chemical liquids or organic solvents (7) Strong vibrations (8) Other places where similar hazardous conditions exist. ■ !Caution (Others) Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product. ■ Notice (Storage and Operating Conditions) To keep solderability of product from declining, the following storage condition is recommended. 1. Storage condition: Temperature -10 to +40 degrees C Humidity less than 75%RH (not dewing condition) 2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system. 3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent. 4. Storage place: Do not store this product in corrosive gas (Sulfuric acid gas, Chlorine gas, etc.) or in direct sunlight. ■ Notice (Rating) Use this product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of this product. 8 ■ Notice (Soldering and Mounting) 1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down. 2. Do not touch the body with soldering iron. The soldering point should be min. 5mm away from the root of lead wire. 41 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. R44E.pdf • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Inrush Current Suppression Lead Type !Caution/Notice ■ Notice (Handling) 1. When this product is operated, temperature of some areas may be about 160 (degree C). Use proper surrounding parts and material which withstand such temperature. If they are inadequate and kept at high temperature for a long time, they may be deteriorated or may produce harmful gas; such harmful gas may deteriorate the element of this product. 2. This product does not have waterproof construction. Splashed water may cause failure mode such as deterioration of characteristics or current leak. Therefore, do not immerse it in water or any solvent. ■ Notice (Others) 1. This product may allow passing higher current than its initial value when it receives inrush current again shortly after the previous one after it cools down and sufficiently recovers its original resistance. Be sure the highest current under actual condition remains within the operating repetition and the operating temperature. 2. The resin coating of this product does not guarantee insulating. Keep an adequate insulating distance to surrounding parts. 8 42 3. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or give a shock at handling. Such forces may cause cracking or chipping to the element. 4. Do not apply excessive force to the lead wire. Otherwise, it may cause the junction between lead and element to break or crack. So, fix lead wire of element side when lead wire is bent or cut. R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Inrush Current Suppression Lead Type Package ■ Minimum Order Quantity Bulk Ammo Pack Taping Part Number Minimum Quantity (pcs.) Part Number Minimum Quantity (pcs.) NTPAN_DKB0 50 - - NTPAJ_DKB0 100 - - NTPAD_DNB0 150 NTPAD_D6A0 400 NTPAA_DNB0 300 NTPAA_D6A0 750 NTPA9_BMB0 300 NTPA9_B1A0 1,000 NTPA7_BMB0 500 NTPA7_B1A0 1,000 ■ Taping Dimensions (NTPAD/NTPAA_D6A0 Series) ∆S P P2 ∆h1 D ∆h2 e H2 T F d t1 t2 l 0 Item øD P0 W W0 L W1 H0 P1 W2 A Code Dimensions (mm) Pitch of Component P 30.0 Pitch of Sprocket Hole P0 15.0±0.3 Lead Spacing F 7.5±0.5 Length from Hole Center to Component Center P2 7.5±1.5 Length from Hole Center to Lead P1 3.75±1.0 Body Diameter D (refer to the table below) Body Thickness T (refer to the table below) Deviation Along Tape, Left or Right ∆S ±2.0 Carrier Tape Width W 18.0±0.5 Position of Sprocket Hole W1 9.0±0.5 Lead Distance between Reference and Bottom Plane H0 16.0±0.5 Height of Component H2 10.0 max. I W0.5 to Y6.0 Protrusion Length Diameter of Sprocket Hole D0 4.0±0.1 Lead Diameter d 0.8±0.05 Total Tape Thickness t1 0.6±0.3 Total Thickness, Tape and Lead Wire t2 2.0 max. ∆h1, ∆h2 2.0 max. Deviation Across Tape L Portion to Cut in Case of Defect Hold down Tape Width W0 11.5 min. Hold down Tape Position W2 4.0 max. e to line A Coating Extension on Lead D (mm) T (mm) NTPAD Type 16.0 max. 5.5 max. NTPAA 12.0 max. 5.0 max. 8 11.0+0 –2.0 Continued on the following page. 43 R44E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only ourour product specifications or consult the approval sheetsheet for product specifications before ordering. only typical typical specifications specifications because becausethere thereisisno nospace spacefor fordetailed detailedspecifications. specifications.Therefore, Therefore,please pleasereview approve product specifications or transact the approval for product specifications before ordering. Feb.21,2011 Inrush Current Suppression Lead Type Package Continued from the preceding page. ■ Taping Dimensions (NTPA9/NTPA7_B1A0 Series) P P2 ∆S ∆h1 ∆h2 D e H2 T d W2 Item t2 t1 Dimensions (mm) P 12.7 Pitch of Sprocket Hole P0 12.7±0.3 Lead Spacing F 5.0+0.8 –0.3 Length from Hole Center to Component Center P2 6.35±1.3 Length from Hole Center to Lead P1 3.85±0.8 Body Diameter D (refer to the table below) Body Thickness T 5.0 max. ∆S ±1.5 Carrier Tape Width W 18.0±0.5 Position of Sprocket Hole W1 9.0+0.5 –0.75 Lead Distance between Reference and Bottom Planes H0 16.0±1.0 Height of Component H2 6.0 max. I W0.5 to Y4.0 D0 4.0±0.3 Lead Diameter d 0.6±0.05 Total Tape Thickness t1 0.6±0.3 Total Thickness, Tape and Lead Wire t2 2.0 max. Protrusion Length Diameter of Sprocket Hole ∆h1, ∆h2 Deviation Across Tape Portion to Cut in Case of Defect L 1.5 max. 11.0+0 –2.0 Hold down Tape Width W0 11.0 min. Hold down Tape Position W2 4.0 max. e to line A Coating Extension on Lead Type 44 Code Pitch of Component Deviation Along Tape, Left or Right 8 0 P0 W W0 L W1 H0 F øD P1 l A D (mm) NTPA9 11.0 max. NTPA7 9.0 max. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. R44E.pdf Feb.21,2011