Corporate: www.cdtechno.com Corporate: www.cdtechno.com Product: www.cdpoweronline.com TX1000 1000 Watt, Single Output, AC/DC Power Supply Harmonic Correction to EN61000-3-2 z Self-Cooled 5”x 4.88”x 12” Chassis z 70-80% Efficiency z Wide Range Input of 90-264VAC z Optional ORing Diode z FCC / CISPR 22 Class A EMI Filtering z UL/CUL 1950, VDE EN60950 z z CE Marked Typical Power Factor of 0.99 z z EN61000-4 Immunity Active Current Sharing ng z l jusstm TX1000 Th TX10 The 000 Series off single-o ssingle-output, i gle-output in gle-ou put put, t, adjustment, active current sharing, adju st eaad d o 1kW W power power supplies aree ffully ullyy featured d M remote remo re motte t inhibit, power fail warning, DC t en worldwide. forr usage world for fo worl wo orl r dw dwide. wide. de. With Weith Wi active signal, and thermal shutdown. A OK si macti c a l ((P (PFC) Poower F Power Factor actor Correctio Correction C orrection PFC F ) to p complete array of output voltages from e r Rwi o EN61000-3-2, wide-range EN N61 N61000-3-2, 61000-3-2, 6 000-3-2, w ide-rangee input innpu of 902.5 to 48VDC is available. The selff y r tVoAC 264VAC, compliance 264V 264VAC AC, EMI co complian ompliance to FCC and cooled 5” x 4.88” x 12” chassis provides c4V a F t c CISPR Mark, and immunity CISP C P R 22, 2, “CE “CE” M industry-standard modularity that a t Con EN61000-4, the TX1000 series is too EN6 EN6100 6 permits optimum flexibility in ready for global deployment. Standard installation. An optional ORing diode is features include remote sense offered on all models greater than 5VDC compensation, output voltage models. PRODUCT SELECTION CHART MODEL OUTPUT VOLTAGE TX10005AASLPLNH OUTPUT CURRENT 5.0 200A (1) 12.0 84A (1) TX10005CASLPLNH 15.0 67A TX10005DASLPLNH(1) 18.0 56A (1) 24.0 42A (1) TX10005BASLPLNH TX10005EASLPLNH TX10005FASLPLNH 28.0 36A (1) TX10005GASLPLNH 36.0 28A TX10005HASLPLNH(1) 48.0 21A (1) TX10005JASLPLNH 20.0 50A (1) 3.3 182A (1) 2.5 200A TXD10005KASLPLNH TXD10005LASLPLNH Notes: (1) Model specified without optional ORing diode; to specify the diode option, replace the letter “N” with the letter “D”, no O-Ring diode on 5V models. TX1000 Rev D 1/2003 INPUT SPECIFICATIONS PARAMETERS Operating Range Input Current Inrush Current Efficiency Holdup Power Factor CONDITIONS 47-63Hz Nominal line, full load 120VAC, 250C, cold start MIN 90 240VAC, 250C, cold start Nominal line, full load Full load (1) 70 20 TYP 75 Full load MAX 264 12 UNITS VAC A 80 160 80 Apk Apk % msec MAX 1000 UNITS Watts % % Amps % pk-pk 0.99 Notes: (1) Harmonic currents meet EN61000-3-2 OUTPUT SPECIFICATIONS PARAMETERS Output Power Voltage Adjustment Range Output Regulation Minimum Load PARD Temperature Coefficient CONDITIONS All environmental and line conditions Relative to nominal output voltage Line and load (each) MIN TYP +5 +0.2 0 Measured at output terminals, 20MHz 0MHz Hz 00 to 500C 1 %/0C +0.2 +0. + +0 02 l ode M t en cem pla r Re fo ENVIRONMENTAL SPECIFICATIONS ECIFICA ory PARAMETERS Ambient Temperature (Operating) Ambient Temperature Altitude (Operating) Altitude (Non-operating) Shock Vibration Cooling Fact t c ta Con CONDITIONS COND OND IONS NS S Output put de-rated de-rate de-rat ed linearly to 5 50% 0% of rated rated capacity between between 500C and 700C MIN TYP MAX 0 +70 -50 +85 -200 +10,000 -200 +50,000 Per MIL-STD-810D, Method 516.3, Procedure II, in each axis, including NTSA drop test Per MIL-STD-810D, Method 514.3, Procedure II, in each axis, including NTSA drop test The TX1000 is provided with an internal cooling fan. Non-operatin Non-operating Product: www.cdpoweronline.com TX1000 Rev D 1/2003 UNITS 0 C C Feet Feet 0 2 PRODUCT FEATURES FEATURES Remote Sense Active Current Sharing ORing Diode OVP CHARACTERISTIC 500mV compensation Single Wire; 5% tolerance if outputs are over 25% of rated load Optional on all models (not available on 5V model) 125% of nominal (+7.5%) Thermal Shutdown DC OK Signal Power Fail Warning Signal Remote Inhibit Automatic Restart Logic “1” when output is within +3% of nominal Transition to Logic “0” at least 5msec before loss of output regulation Logic “0” applied will inhibit output (referenced to –Sense terminal) PRODUCT COMPLIANCES APPROVAL UL and cUL VDE FCC CISPR 22 EN61000-3-2 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 CE Mark CHARACTERISTIC UL1950, 3rd Edition (1) EN60950 Class A requirements for conducted emissions Class A requirements for conducted emissions Harmonic Currents, Class A Electrostatic Discharge, Level 4 Radiated Immunity, Level 2 Electrical Fast Transients, Level vel 3 Input Surge Immunity, y, Level evell 3 Conducted Immunity Immunity, munity, Level 4 Immunity, Level Magnetic gnetic Field F Im mmunity, y, Leve y, el 2 Low L w Voltage g Dire Direc Directive ectiv ctive Notes: (1) UL1950, 3rd del o M nt eme c a l p Edition on n incorporates ates the the requireme requirements ents of CSA 1950. r199R50.e o f y ctor a F ct taORDERING n RING INFORMATION INF o C MODEL DESIGNATION TX1000 BASE MODEL Chassis: “5” = 5” x 4.88” x 12”; “M” = modified Output Voltage: See Chart below Input Filter: “A” designates Class A EMI filter Fan: “S” designates Standard Fan Remote Inhibit: “L” designates that Logic “0” applied inhibits output “P” designates Active Input Power Factor Correction with widerange input voltage of 90-264 VAC Power Fail Warning: “L” designates transition to Logic “0” upon loss of AC Output ORing diode: “N” = None; “D” = Diode Option DC OK: “H” designates that Logic “1” indicates a DC OK condition OUTPUT VOLTAGES A = 5V G = 36V B = 12V H = 48V C = 15V J = 20V D = 18V K = 3.3V E = 24V L = 2.5V F = 28V Product: www.cdpoweronline.com TX1000 Rev D 1/2003 3 MECHANICAL V ADJ J1 PIN 1 .19 MAX 3.000 1.00 1.22 AIR FLOW 8-32UNC-2B .25 MAX. SCREW PENETRATION 4 PLACES 6.375 12.00 12.0 00 el d o nt M y ctor a F ct eme c a l ep for R 10 2 J1 9 1 ta Con .60 4.88 +.000 -.170 .315 TYP 1.85 1.95 J1 CONNECTOR 3.45 AMP NO. 87579-2 OR EQUIVALENT 1/4 - 20 UNC-2A HEX HEAD SCREW 2 PLACES Power Electronics Division, Americas 3400 E Britannia Drive, Tucson, Arizona 85706 Tel: 800.547.2537 Fax: 520.295.4197 1.00 1.60 REMOTE INHIBIT DC OK N/C N/C POWER FAIL CURRENT SHARE + SENSE N/C _ SENSE N/C TB1 6-32 UNF-2A PHILSLOT TORQUE TO 9 INCH/LBS MAX. 3 PLACES 1 2 3 4 5 6 7 8 9 10 5.00 PIN FUNCTION NO. C&D Technologies, EMEA/AP Milton Keynes MK14 5BU UK Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545 Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications. Product: www.cdpoweronline.com TX1000 Rev D 1/2003 4