MURATA NCP18XW223E03RB

!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
Cat.No.R44E-12
R44E.pdf
10.2.22
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for EU RoHS Compliant
•
•
•
All the products in this catalog comply with EU RoHS.
EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CONTENTS
1
Part Numbering
2
Basic Characteristics
6
1
for Temperature Sensor and Compensation 0201 (0603) Size
7
2
for Temperature Sensor and Compensation 0402 (1005) Size
8
3
for Temperature Sensor and Compensation 0603 (1608) Size
10
4
for Temperature Sensor and Compensation 0805 (2012) Size
12
for Temp. Sensor and Compensation Chip Type Standard Land Pattern Dimensions
13
for Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
14
for Temp. Sensor and Compensation Chip Type !Caution/Notice
18
for Temp. Sensor and Compensation Chip Type Package
22
for Temperature Sensor Thermo String Type
25
for Temperature Sensor Thermo String Type Specifications and Test Methods
26
6
for Temperature Sensor Lead Type
28
7
for Temperature Sensor Lead Insulation Type
29
5
for Temperature Sensor Temperature Characteristics (Center Value)
31
for Temperature Sensor Thermo String Type/Lead Type !Caution/Notice
32
for Temperature Sensor Thermo String Type/Lead Type Package
34
8
for Inrush Current Suppression Lead Type
35
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
37
for Inrush Current Suppression Lead Type !Caution/Notice
41
for Inrush Current Suppression Lead Type Package
43
2
3
4
5
6
7
8
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
NTC Thermistors for Temp. Sensor and Compensation Chip Type
(Part Number)
NC
P
18
XH
103
q
w e
r
t
03
RB
y u
i
J
qProduct ID
tResistance
Product ID
NC
NTC Thermistors Chip Type
wSeries
Code
Series
P
Plated Termination Series
Expressed by three-digit alphanumerics. The unit is ohm (Ω).
The first and second figures are significant digits, and the third
figure expresses the number of zeros which follow the two
figures. If there is a decimal point, it is expressed by the capital
letter "R". In this case, all figures are significant digits.
Ex.
Code
eDimensions (LgW)
1kΩ
103
10kΩ
104
100kΩ
Code
Dimensions (LgW)
EIA
03
0.60g0.30mm
0201
15
1.00g0.50mm
0402
Code
Resistance Tolerance
18
1.60g0.80mm
0603
D
±0.5%
21
2.00g1.25mm
0805
E
±3%
F
±1%
J
±5%
rTemperature Characteristics
2
Resistance
102
yResistance Tolerance
Code
Temperature Characteristics
WB
Nominal B-Constant 4050e4099K
uIndividual Specifications
WD
Nominal B-Constant 4150e4199K
Structures and others are expressed by two figures.
WF
Nominal B-Constant 4250e4299K
WL
Nominal B-Constant 4450e4499K
WM
Nominal B-Constant 4500e4549K
XC
Nominal B-Constant 3100e3149K
XF
Nominal B-Constant 3250e3299K
Code
Individual Specifications
03
Standard Type
Please contact us for details.
iPackaging
XH
Nominal B-Constant 3350e3399K
Code
XM
Nominal B-Constant 3500e3549K
RA
Plastic Taping 4mm Pitch
XQ
Nominal B-Constant 3650e3699K
RB
Paper Taping 4mm Pitch
XV
Nominal B-Constant 3900e3949K
RC
Paper Taping 2mm Pitch (10000 pcs.)
XW
Nominal B-Constant 3950e3999K
RL
Paper Taping 2mm Pitch (15000 pcs.)
Packaging
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistor for Temperature Sensor Thermo String Type
(Part Number)
NXF
T
15
XH
103
q
w
e
r
t
F
A
2
B
y u i o
qProduct ID
025
!0
uLead Wire Type
Product ID
NXF
NTC Thermistors Sensor Thermo String Type
wIndividual Specifications
Code
Lead Wire Type
A
ø0.3 Copper Lead Wire with Polyurethane Coat
iShape of the Lead Wire Kink
Code
Individual Specifications
Code
Shape of the Lead Wire Kink
T
Commercial Type
1
The Twist of Lead Wire Type
2
Standard Type
eChip Dimensions
Code
Dimensions (LxT)
EIA
15
1.00 x 0.50mm
0402
oPackaging
Code
Packaging
B
Bulk
rTemperature Characteristics
!0Dimensions (Full Length)
Code
Temperature Characteristics
WB
Nominal B-Constant 4050–4099K
Code
Dimensions (Full Length)
WF
Nominal B-Constant 4250–4299K
025
25mm
XH
Nominal B-Constant 3350–3399K
030
30mm
040
40mm
050
50mm
060
60mm
070
70mm
080
80mm
tResistance
Expressed by three figures. The unit is (Ω). The first and second
figures are significant digits, and the third figure expresses the
number of zeros which follow the two figures.
Ex.
Code
Resistance
103
10kΩ
473
47kΩ
104
100kΩ
yResistance Tolerance
Code
Resistance Tolerance
F
±1%
090
90mm
100
100mm
110
110mm
120
120mm
130
130mm
140
140mm
150
150mm
3
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors for Temperature Sensor Lead Type
(Part Number)
NT
SA0
XH
103
q
w
e
r
F
E1 B0
t y
u
qProduct ID
tResistance Tolerance
Product ID
NT
NTC Thermistors
Code
Resistance Tolerance
E
±3%
F
±1%
wSeries
Code
Series
SA0
for Temperature Sensors No Lead-coating Type
SD0
for Temperature Sensors Lead-coating Type
(Total Length 30mm max.)
SD1
for Temperature Sensors Lead-coating Type
(Total Length 30 to 50mm)
eTemperature Characteristics
Individual Specifications
E1
Standard Bulk (NTSA, NTSD0 Series)
N6
Standard Ammo Pack Taping (NTSA Series)
PB
Standard Bulk (NTSD1 Series)
Code
Temperature Characteristics
Code
Packaging
WB
Nominal B-Constant 4050e4099K
A0
Ammo Pack Taping
WC
Nominal B-Constant 4100e4149K
B0
Bulk
WD
Nominal B-Constant 4150e4199K
WF
Nominal B-Constant 4250e4299K
uTotal Length (NTSD1 Series)
XH
Nominal B-Constant 3350e3399K
Code
Total Length
XM
Nominal B-Constant 3500e3549K
30
30mm
XR
Nominal B-Constant 3700e3749K
40
40mm
XV
Nominal B-Constant 3900e3949K
50
50mm
rResistance
4
Code
uPackaging (NTSA/NTSD0 Series)
Expressed by three-digit alphanumerics. The unit is ohm (Ω).
The first and second figures are significant digits, and the third
figure expresses the number of zeros which follow the two
figures. If there is a decimal point, it is expressed by the capital
letter "R". In this case, all figures are significant digits.
Ex.
yIndividual Specifications
A lead structure and other specifications are expressed by two digits.
Code
Resistance
202
2kΩ
203
20kΩ
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors for Inrush Current Suppression Lead Type
(Part Number)
NT
PA7
160
L
BM
B0
q
w
e
r
t
y
qProduct ID
rResistance Tolerance
Product ID
NT
NTC Thermistors
wSeries
Code
Resistance Tolerance
L
±15%
tIndividual Specifications
Code
Series
Nominal Body Diameter
PA7
ø7mm
PA9
A lead structure and other specifications are expressed by two
capital letters.
ø9mm
Code
Individual Specifications
Body Diameter
ø10mm
B1
Standard Type (Ammo Pack)
ø7mm, ø9mm
ø13mm
BM
Standard Type (Bulk)
ø7mm, ø9mm
PAJ
ø18mm
D6
PAN
ø22mm
DK
Standard (Bulk)
ø18mm, ø22mm
DN
Standard (Bulk)
ø10mm, ø13mm
Inrush Current
Suppression
Lead Type
PAA
PAD
Standard Type (Ammo Pack) ø10mm, ø13mm
eResistance
Expressed by three-digit alphanumerics. The unit is ohm (Ω).
The first and second figures are significant digits, and the third
figure expresses the number of zeros which follow the two
figures. If there is a decimal point, it is expressed by the capital
letter "R". In this case, all figures are significant digits.
Ex.
Code
yPackaging
Code
Packaging
A0
Ammo Pack Taping
B0
Bulk
Resistance
3R0
3Ω
100
10Ω
5
PDF catalog
is downloaded
from!CAUTION
the website(for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
are
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
!Note • This
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
insubject
this catalog
to prevent
burning,
etc.
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Basic Characteristics
!Basic Characteristics
1. Zero-power Resistance of Thermistor: R
Resistance vs. Temperature
102
Resistance vs. Temperature Characteristics, R/R25
R=R0 expB (1/T-1/T0) ..............(1)
R: Resistance in ambient temperature T (K)
(K: absolute temperature)
R0: Resistance in ambient temperature T0 (K)
B: B-Constant of Thermistor
2. B-Constant
as (1) formula
B=Rn (R/R0) / (1/T-1/T0)
............(2)
3. Thermal Dissipation Constant
When electric power P (mW) is spent in ambient
temperature T1 and thermistor temperature rises T2,
there is a formula as follows
P=C (T2-T1) ..................(3)
C: Thermal dissipation constant (mW/°C)
Thermal dissipation constant is varied with dimensions,
measurement conditions, etc.
101
1
10−1
B=3450
B=3900
B=4100
10−2
−20
0
20 40 60 80 100 120
Temperature (˚C)
4. Thermal Time Constant
Period in which Thermistor's temperature will change
63.2% of its temperature difference from ambient
temperature T0 (°C) to T1 (°C).
Thermal Time Constant
T1
Temperature
X
63.2%
T0
Time
!Performance
Item
Resistance
Condition
Measured by zero-power in specified ambient temperature.
Calculated between two specified ambient temperatures by next formula.
T and T0 is absolute temperature (K).
B-Constant
B=
Thermal Dissipation
Constant
Rn (R/R0)
1/TY1/T0
Shows necessary electric power that Thermistor's temperature rises 1˚C by self heating.
It is calculated by next formula. (mW/˚C)
C=
P
TYT0
Rated Electric Power
Shows necessary electric power that Thermistor's temperature rises to a specified temperature by self heating in ambient
temperature 25˚C.
Permissive Operating Current
It is possible to keep Thermistor's temperature rising max. 1˚C.
Please inquire about test conditions and ratings.
6
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
1
for Temperature Sensor and Compensation 0201 (0603) Size
0.30±0.03
0201/0402/0603/0805 sized Chip NTC Thermistors have Ni
barrier termination and provide excellent solderability
and offer high stability in environment by unique inner
construction.
0.15±0.05
0.15±0.05
0.60±0.03
■ Features
0.30±0.03
1. Excellent solderability and high stability in
environment
2. Excellent long time aging stability
3. High accuracy in resistance and B-Constant
4. Reflow soldering possible
5. NCP series are recognized by UL/cUL.
(UL1434, File No.E137188)
Electrode
(Ag System + Ni Plating + Sn Plating)
(in mm)
■ Applications
1. Temperature compensation for transistor, IC and
crystal oscillator in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric circuits
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
NCP03YS110J05RL
11 ±5%
2750 ±3%
2758
2758
2758
9.50
100
1
NCP03YS220J05RL
22 ±5%
2750 ±3%
2758
2758
2758
6.70
100
1
NCP03YS330J05RL
33 ±5%
2750 ±3%
2758
2758
2758
5.50
100
1
NCP03YS470J05RL
47 ±5%
2750 ±3%
2758
2758
2758
4.60
100
1
NCP03YS680J05RL
68 ±5%
2750 ±3%
2758
2758
2758
3.80
100
1
NCP03YS101J05RL
100 ±5%
2750 ±3%
2758
2758
2758
3.10
100
1
NCP03XM102p05RL
1.0k
3500 ±1%
3539
3545
3560
1.00
100
1
NCP03XM152p05RL
1.5k
3500 ±1%
3539
3545
3560
0.81
100
1
NCP03XM222p05RL
2.2k
3500 ±1%
3539
3545
3560
0.67
100
1
NCP03XM332p05RL
3.3k
3500 ±1%
3539
3545
3560
0.55
100
1
NCP03XM472p05RL
4.7k
3500 ±1%
3539
3545
3560
0.46
100
1
NCP03XH682p05RL
6.8k
3380 ±1%
3428
3434
3455
0.38
100
1
NCP03XH103F05RL
10k ±1%
3380 ±1%
3428
3434
3455
0.31
100
1
NCP03XH103p05RL
10k
3380 ±1%
3428
3434
3455
0.31
100
1
NCP03XV103p05RL
10k
3900 ±1%
3930
3934
3944
0.31
100
1
NCP03XH153p05RL
15k
3380 ±1%
3428
3434
3455
0.25
100
1
NCP03XH223p05RL
22k
3380 ±1%
3428
3434
3455
0.21
100
1
NCP03WF333p05RL
33k
4250 ±1%
4303
4311
4334
0.17
100
1
NCP03WB473p05RL
47k
4050 ±3%
4101
4108
4131
0.14
100
1
NCP03WL473p05RL
47k
4485 ±1%
4537
4543
4557
0.14
100
1
NCP03WF683p05RL
68k
4250 ±1%
4303
4311
4334
0.12
100
1
NCP03WL683p05RL
68k
4485 ±1%
4537
4543
4557
0.12
100
1
NCP03WF104F05RL
100k ±1%
4250 ±1%
4303
4311
4334
0.10
100
1
NCP03WF104p05RL
100k
4250 ±1%
4303
4311
4334
0.10
100
1
NCP03WL104p05RL
100k
4485 ±1%
4537
4543
4557
0.10
100
1
NCP03WL154p05RL
150k
4485 ±1%
4537
4543
4557
0.08
100
1
NCP03WL224p05RL
220k
4485 ±1%
4537
4543
4557
0.06
100
1
Part Number
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
A blank column is filled with resistance tolerance codes (E: ±3%, J: ±5%).
Rated Electric Power is necessary electric power that Thermistor's temperature rises 100°C by self heating at 25°C in still air.
Operating Temperature Range: -40°C to +125°C
7
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
for Temperature Sensor and Compensation 0402 (1005) Size
0.5±0.05
0201/0402/0603/0805 sized Chip NTC Thermistor have Ni
barrier termination and provide excellent solderability
and offer high stability in environment by unique inner
construction.
0.25±0.10
0.25±0.10
1.0±0.05
■ Features
1. Excellent solderability and high stability in
environment
2. Excellent long time aging stability
3. High accuracy in resistance and B-Constant
4. Reflow soldering possible
5. Same B-constant in the same resistance in the three
sizes (0805 size / 0603 size / 0402 size)
Easy to use smaller size in the circuits
6. NCP series are recognized by UL/cUL.
(UL1434, File No.E137188)
0.5±0.05
2
Electrode
(Ag System + Ni Plating + Sn Plating)
(in mm)
■ Applications
1. Temperature compensation for transistor, IC and
crystal oscillator in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric
circuits
Part Number
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
NCP15XC220p03RC
22
3100 ±3%
3126
3128
3136
6.70
100
1
NCP15XC330p03RC
33
3100 ±3%
3126
3128
3136
5.50
100
1
NCP15XC470p03RC
47
3100 ±3%
3126
3128
3136
4.60
100
1
NCP15XC680p03RC
68
3100 ±3%
3126
3128
3136
3.80
100
1
NCP15XF101p03RC
100
3250 ±3%
3282
3284
3296
3.10
100
1
NCP15XF151p03RC
150
3250 ±3%
3282
3284
3296
2.50
100
1
NCP15XM221p03RC
220
3500 ±3%
3539
3545
3560
2.10
100
1
NCP15XM331p03RC
330
3500 ±3%
3539
3545
3560
1.70
100
1
NCP15XQ471p03RC
470
3650 ±2%
3688
3693
3706
1.40
100
1
NCP15XQ681p03RC
680
3650 ±3%
3688
3693
3706
1.20
100
1
NCP15XQ102p03RC
1.0k
3650 ±2%
3688
3693
3706
1.00
100
1
NCP15XW152p03RC
1.5k
3950 ±3%
3982
3987
3998
0.81
100
1
NCP15XW222p03RC
2.2k
3950 ±3%
3982
3987
3998
0.67
100
1
NCP15XW332p03RC
3.3k
3950 ±3%
3982
3987
3998
0.55
100
1
NCP15XM472p03RC
4.7k
3500 ±2%
3539
3545
3560
0.46
100
1
NCP15XW682p03RC
6.8k
3950 ±3%
3982
3987
3998
0.38
100
1
NCP15XH103D03RC
10k ±0.5%
3380 ±0.7%
3428
3434
3455
0.31
100
1
NCP15XH103F03RC
10k ±1%
3380 ±1%
3428
3434
3455
0.31
100
1
NCP15XH103p03RC
10k
3380 ±1%
3428
3434
3455
0.31
100
1
NCP15XV103p03RC
10k
3900 ±3%
3930
3934
3944
0.31
100
1
NCP15XW153p03RC
15k
3950 ±3%
3982
3987
3998
0.25
100
1
NCP15XW223p03RC
22k
3950 ±3%
3982
3987
3998
0.21
100
1
NCP15WL223p03RC
22k
4485 ±1%
4537
4543
4557
0.21
100
1
NCP15WB333p03RC
33k
4050 ±3%
4101
4108
4131
0.17
100
1
NCP15WL333p03RC
33k
4485 ±1%
4537
4543
4557
0.17
100
1
Continued on the following page.
8
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Part Number
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
NCP15WB473D03RC
47k ±0.5%
4050 ±0.5%
4101
4108
4131
0.14
100
1
NCP15WB473F03RC
47k ±1%
4050 ±1%
4101
4108
4131
0.14
100
1
NCP15WB473p03RC
47k
4050 ±1%
4101
4108
4131
0.14
100
1
NCP15WL473p03RC
47k
4485 ±1%
4537
4543
4557
0.14
100
1
NCP15WD683p03RC
68k
4150 ±3%
4201
4209
4232
0.12
100
1
NCP15WL683p03RC
68k
4485 ±1%
4537
4543
4557
0.12
100
1
4303
4311
4334
0.10
100
1
NCP15WF104D03RC
100k ±0.5% 4250 ±0.5%
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
NCP15WF104F03RC
100k ±1%
4250 ±1%
4303
4311
4334
0.10
100
1
NCP15WF104p03RC
100k
4250 ±1%
4303
4311
4334
0.10
100
1
NCP15WL104p03RC
100k
4485 ±1%
4537
4543
4557
0.10
100
1
NCP15WL154p03RC
150k
4485 ±1%
4537
4543
4557
0.08
100
1
NCP15WM154p03RC
150k
4500 ±3%
4571
4582
4614
0.08
100
1
NCP15WM224p03RC
220k
4500 ±3%
4571
4582
4614
0.06
100
1
NCP15WM474p03RC
470k
4500 ±3%
4571
4582
4614
0.04
100
1
2
A blank column is filled with resistance tolerance codes (E: ±3%, J: ±5%).
Rated Electric Power is necessary electric power that Thermistor's temperature rises 100°C by self heating at 25°C in still air.
Operating Temperature Range: -40°C to +125°C
9
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
for Temperature Sensor and Compensation 0603 (1608) Size
0.8±0.15
0201/0402/0603/0805 sized Chip NTC Thermistors have Ni
barrier termination and provide excellent solderability
and offer high stability in environment by unique inner
construction.
0.2-0.6
0.2-0.6
1.6±0.15
■ Features
1. Excellent solderability and high stability in
environment
2. Excellent long time aging stability
3. High accuracy in resistance and B-constant
4. Flow / Reflow soldering possible
5. Same B-Constant in the same resistance in the three
sizes (0805 size / 0603 size / 0402 size)
Easy to use smaller size in the circuits
6. NCP series are recognized by UL/cUL.
(UL1434, File No.E137188)
0.8±0.15
3
Electrode
(Ag System + Ni Plating + Sn Plating)
(in mm)
■ Applications
1. Temperature compensation for transistor, IC and
crystal oscillator in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric
circuits
Part Number
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
NCP18XF101p03RB
100
3250 ±3%
3282
3284
3296
3.10
100
1
NCP18XF151p03RB
150
3250 ±3%
3282
3284
3296
2.50
100
1
NCP18XM221p03RB
220
3500 ±3%
3539
3545
3560
2.10
100
1
NCP18XM331p03RB
330
3500 ±3%
3539
3545
3560
1.70
100
1
NCP18XQ471p03RB
470
3650 ±2%
3688
3693
3706
1.40
100
1
NCP18XQ681p03RB
680
3650 ±3%
3688
3693
3706
1.20
100
1
NCP18XQ102p03RB
1.0k
3650 ±2%
3688
3693
3706
1.00
100
1
NCP18XW152p03RB
1.5k
3950 ±3%
3982
3987
3998
0.81
100
1
NCP18XW222p03RB
2.2k
3950 ±3%
3982
3987
3998
0.67
100
1
NCP18XW332p03RB
3.3k
3950 ±3%
3982
3987
3998
0.55
100
1
NCP18XM472p03RB
4.7k
3500 ±2%
3539
3545
3560
0.46
100
1
NCP18XW682p03RB
6.8k
3950 ±3%
3982
3987
3998
0.38
100
1
NCP18XH103D03RB
10k ±0.5%
3380 ±0.7%
3428
3434
3455
0.31
100
1
NCP18XH103F03RB
10k ±1%
3380 ±1%
3428
3434
3455
0.31
100
1
NCP18XH103p03RB
10k
3380 ±1%
3428
3434
3455
0.31
100
1
NCP18XV103p03RB
10k
3900 ±3%
3930
3934
3944
0.31
100
1
NCP18XW153p03RB
15k
3950 ±3%
3982
3987
3998
0.25
100
1
NCP18XW223p03RB
22k
3950 ±3%
3982
3987
3998
0.21
100
1
NCP18WB333p03RB
33k
4050 ±3%
4101
4108
4131
0.17
100
1
NCP18WB473D03RB
47k ±0.5%
4030 ±0.5%
4101
4108
4131
0.14
100
1
NCP18WB473F10RB
47k ±1%
4050 ±1.5%
4101
4108
4131
0.14
100
1
NCP18WB473p03RB
47k
4050 ±2%
4101
4108
4131
0.14
100
1
NCP18WD683p03RB
68k
4150 ±3%
4201
4209
4232
0.12
100
1
4255
4260
4282
0.10
100
1
4255
4260
4282
0.10
100
1
NCP18WF104D03RB
NCP18WF104F12RB
100k ±0.5% 4200 ±0.5%
100k ±1%
4200 ±1%
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
Continued on the following page.
10
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Part Number
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
NCP18WF104p03RB
100k
4250 ±2%
4255
4260
4282
0.10
100
1
NCP18WM154p03RB
150k
4500 ±3%
4571
4582
4614
0.08
100
1
NCP18WM224p03RB
220k
4500 ±3%
4571
4582
4614
0.06
100
1
NCP18WM474p03RB
470k
4500 ±3%
4571
4582
4614
0.04
100
1
A blank column is filled with resistance tolerance codes (E: ±3%, J: ±5%).
Rated Electric Power is necessary electric power that Thermistor's temperature rises 100°C by self heating at 25°C in still air.
Operating Temperature Range: -40°C to +125°C
3
11
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
1.25±0.2
for Temperature Sensor and Compensation 0805 (2012) Size
0201/0402/0603/0805 sized Chip NTC Thermistors have Ni
barrier termination and provide excellent solderability
and offer high stability in environment by unique inner
construction.
0.2-0.7
2.0±0.2
■ Features
4
0.2-0.7
0.85±0.15
1. Excellent solderability and high stability in
environment
2. Excellent long time aging stability
3. High accuracy in resistance and B-constant
4. Flow / Reflow soldering possible
5. Same B-Constant in the same resistance in the three
sizes (0805 size / 0603 size / 0402 size)
Easy to use smaller size in the circuits
6. NCP series are recognized by UL/cUL.
(UL1434, File No.E137188)
Electrode
(Ag System + Ni Plating + Sn Plating)
(in mm)
■ Applications
1. Temperature compensation for transistor, IC and
crystal oscillator in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric
circuits
Part Number
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
NCP21XM221J03RA
220 ±5%
3500 ±3%
3539
3545
3560
3.00
200
2
NCP21XQ471J03RA
470 ±5%
3650 ±3%
3688
3693
3706
2.00
200
2
NCP21XQ102J03RA
1.0k ±5%
3650 ±3%
3688
3693
3706
1.40
200
2
NCP21XW222J03RA
2.2k ±5%
3950 ±3%
3982
3987
3998
0.90
200
2
NCP21XM472J03RA
4.7k ±5%
3500 ±3%
3539
3545
3560
0.65
200
2
NCP21XV103J03RA
10k ±5%
3900 ±3%
3930
3934
3944
0.44
200
2
NCP21XW153J03RA
15k ±5%
3950 ±3%
3982
3987
3998
0.36
200
2
NCP21XW223J03RA
22k ±5%
3950 ±3%
3982
3987
3998
0.30
200
2
NCP21WB333J03RA
33k ±5%
4050 ±3%
4101
4108
4131
0.24
200
2
NCP21WB473J03RA
47k ±5%
4050 ±3%
4101
4108
4131
0.20
200
2
NCP21WF104J03RA
100k ±5%
4250 ±3%
4303
4311
4334
0.14
200
2
Rated Electric Power is necessary electric power that Thermistor's temperature rises 100°C by self heating at 25°C in still air.
Operating Temperature Range: -40°C to +125°C
12
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type Standard Land Pattern Dimensions
c
Chip
b
Part Number
NCP03
NCP15
NCP18
NCP21
Solder Resist
Land
a
Dimensions (mm)
Soldering
Methods
Chip (LxW)
a
b
Reflow Soldering 0.6x0.3
0.25
0.25
Reflow Soldering 1.0x0.5
0.4 0.4-0.5
Flow Soldering
0.6-1.0 0.8-0.9
1.6x0.8
Reflow Soldering
0.6-0.8 0.6-0.7
Flow Soldering
1.0-1.1 0.9-1.0
2.0x1.25
Reflow Soldering
1.0-1.1 0.6-0.7
c
0.3
0.5
0.6-0.8
0.6-0.8
1.0-1.2
1.0-1.2
4
13
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
4
Part Number NCPppYS110
11Ω
Resistance
2750K
B-Constant
Temp. (°C) Resistance (Ω)
Y40
127.366
Y35
101.662
Y30
81.726
Y25
66.148
Y20
53.946
Y15
44.273
Y10
36.494
Y5
30.262
0
25.226
5
21.150
10
17.828
15
15.103
20
12.859
25
11.000
30
9.452
35
8.162
40
7.077
45
6.161
50
5.389
55
4.731
60
4.168
65
3.687
70
3.273
75
2.915
80
2.605
85
2.335
90
2.100
95
1.894
100
1.713
105
1.554
110
1.412
115
1.287
120
1.176
125
1.077
NCPppYS220
22Ω
2750K
Resistance (Ω)
254.732
203.325
163.452
132.296
107.893
88.546
72.987
60.523
50.451
42.300
35.657
30.205
25.719
22.000
18.904
16.323
14.155
12.323
10.778
9.461
8.336
7.374
6.545
5.830
5.210
4.671
4.201
3.789
3.427
3.107
2.825
2.574
2.352
2.153
NCPppXC220
22Ω
3100K
Resistance (Ω)
355.823
273.975
213.003
166.943
131.997
105.318
84.670
68.628
55.981
45.859
37.819
31.396
26.211
22.000
18.560
15.735
13.403
11.462
9.842
8.488
7.348
6.399
5.595
4.896
4.299
3.795
3.360
2.983
2.656
2.367
2.116
1.901
1.712
1.543
NCPppYS330
33Ω
2750K
Resistance (Ω)
382.098
304.987
245.178
198.444
161.839
132.819
109.481
90.785
75.677
63.449
53.485
45.308
38.578
33.000
28.356
24.485
21.232
18.484
16.167
14.192
12.504
11.061
9.817
8.744
7.814
7.006
6.301
5.683
5.140
4.661
4.237
3.862
3.528
3.230
NCPppXC330
33Ω
3100K
Resistance (Ω)
533.734
410.962
319.504
250.415
197.996
157.978
127.005
102.942
83.972
68.789
56.728
47.094
39.317
33.000
27.840
23.603
20.104
17.193
14.763
12.732
11.022
9.598
8.392
7.345
6.448
5.692
5.040
4.474
3.983
3.551
3.173
2.851
2.568
2.314
NCPppYS470
47Ω
2750K
Resistance (Ω)
544.201
434.376
349.193
282.633
230.498
189.167
155.927
129.299
107.782
90.367
76.176
64.529
54.944
47.000
40.386
34.872
30.239
26.326
23.025
20.213
17.809
15.753
13.982
12.454
11.130
9.979
8.974
8.094
7.320
6.638
6.035
5.500
5.024
4.600
NCPppXC470
47Ω
3100K
Resistance (Ω)
760.166
585.310
455.051
356.652
281.994
224.998
180.886
146.614
119.596
97.972
80.794
67.073
55.997
47.000
39.651
33.616
28.633
24.487
21.026
18.133
15.698
13.670
11.952
10.461
9.184
8.107
7.179
6.373
5.673
5.057
4.520
4.060
3.657
3.296
NCPppYS680
68Ω
2750K
Resistance (Ω)
787.354
628.459
505.215
408.915
333.487
273.688
225.597
187.071
155.940
130.744
110.212
93.361
79.494
68.000
58.430
50.454
43.750
38.089
33.313
29.244
25.766
22.792
20.230
18.019
16.102
14.437
12.984
11.710
10.591
9.604
8.731
7.957
7.269
6.655
Part Number NCPppXC680
68Ω
Resistance
3100K
B-Constant
Temp. (°C) Resistance (Ω)
Y40
1099.815
Y35
846.832
Y30
658.372
Y25
516.007
Y20
407.991
Y15
325.529
Y10
261.707
Y5
212.123
0
173.033
5
141.747
10
116.894
15
97.042
20
81.016
25
68.000
30
57.368
35
48.636
40
41.426
45
35.428
50
30.421
55
26.235
60
22.712
65
19.778
70
17.293
75
15.134
80
13.288
85
11.729
90
10.386
95
9.220
100
8.208
105
7.317
110
6.539
115
5.874
120
5.291
125
4.768
NCPppYS101
100Ω
2750K
Resistance (Ω)
1157.874
924.204
742.963
601.346
490.422
402.482
331.760
275.105
229.324
192.270
162.076
137.296
116.902
100.000
85.927
74.197
64.339
56.013
48.989
43.006
37.891
33.517
29.750
26.498
23.680
21.231
19.094
17.221
15.575
14.124
12.840
11.702
10.690
9.787
NCPppXF101
100Ω
3250K
Resistance (Ω)
1824.175
1390.685
1070.653
831.138
650.960
514.441
409.700
328.877
265.759
215.785
176.395
145.161
120.152
100.000
83.669
70.361
59.456
50.470
43.029
36.830
31.649
27.364
23.756
20.651
18.011
15.800
13.908
12.263
10.844
9.622
8.563
7.648
6.850
6.162
NCPppXF151
150Ω
3250K
Resistance (Ω)
2736.262
2086.028
1605.979
1246.708
976.440
771.661
614.550
493.315
398.639
323.677
264.592
217.742
180.228
150.000
125.503
105.541
89.184
75.705
64.543
55.246
47.473
41.045
35.634
30.976
27.016
23.700
20.862
18.394
16.265
14.434
12.844
11.472
10.275
9.243
NCPppXM221 NCPppXM331
220Ω
330Ω
3500K
3500K
Resistance (Ω) Resistance (Ω)
4947.904
7421.856
3703.755
5555.632
2798.873
4198.309
2135.887
3203.831
1645.037
2467.555
1278.034
1917.051
1000.620
1500.930
789.612
1184.418
627.752
941.628
502.474
753.711
405.010
607.514
328.480
492.720
268.044
402.066
220.000
330.000
181.576
272.365
150.668
226.002
125.681
188.521
105.336
158.004
88.717
133.076
75.059
112.588
63.777
95.666
54.415
81.622
46.631
69.946
40.115
60.172
34.637
51.955
30.013
45.019
26.110
39.165
22.790
34.186
19.957
29.935
17.541
26.312
15.453
23.180
13.663
20.494
12.114
18.171
10.778
16.168
NCPppXQ471
470Ω
3650K
Resistance (Ω)
11822.473
8767.745
6570.224
4971.784
3796.933
2923.400
2269.599
1775.225
1399.050
1110.220
887.257
713.463
577.375
470.000
384.800
316.757
262.177
218.069
182.297
153.150
129.249
109.551
93.281
79.750
68.446
58.996
51.036
44.332
38.640
33.790
29.664
26.123
23.091
20.472
NCPppXQ681
680Ω
3650K
Resistance (Ω)
17104.854
12685.248
9505.855
7193.219
5493.436
4229.599
3283.675
2568.411
2024.158
1606.275
1283.691
1032.245
835.351
680.000
556.733
458.287
379.320
315.504
263.749
221.579
186.998
158.499
134.960
115.383
99.029
85.356
73.839
64.140
55.905
48.888
42.918
37.795
33.409
29.618
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
Continued on the following page.
14
1
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Continued from the preceding page.
Part Number NCPppXM102 NCPppXQ102 NCPppXM152 NCPppXW152 NCPppXM222 NCPppXW222 NCPppXM332 NCPppXW332
2.2kΩ
3.3kΩ
1kΩ
Resistance
1kΩ
1.5kΩ
1.5kΩ
2.2kΩ
3.3kΩ
3650K
3950K
B-Constant
3500K
3500K
3500K
3950K
3500K
3950K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
21.266
25.154
31.899
51.791
46.786
70.179
113.941
75.961
Y35
16.150
18.655
24.225
37.172
35.530
53.295
81.779
54.520
Y30
12.347
13.979
18.520
27.005
27.162
40.743
59.411
39.607
Y25
9.503
10.578
14.255
19.843
20.907
31.360
43.654
29.103
Y20
7.365
8.079
11.047
14.728
16.203
24.304
32.401
21.601
Y15
5.747
6.220
8.621
11.044
12.644
18.966
24.297
16.198
Y10
4.516
4.829
6.773
8.362
9.934
14.901
18.396
12.264
Y5
3.572
3.777
5.358
6.389
7.858
11.787
14.055
9.370
0
2.844
2.977
4.266
4.922
6.257
9.386
10.829
7.219
5
2.280
2.362
3.419
3.825
5.015
7.523
8.414
5.609
10
1.839
1.888
2.758
2.994
4.045
6.067
6.586
4.391
15
1.492
1.518
2.238
2.361
3.283
4.924
5.195
3.463
20
1.218
1.229
1.827
1.876
2.680
4.019
4.126
2.751
25
1.000
1.000
1.500
1.500
2.200
3.300
3.300
2.200
30
0.825
0.819
1.238
1.207
1.816
2.724
2.656
1.771
35
0.685
0.674
1.027
0.978
1.507
2.260
2.152
1.434
40
0.571
0.558
0.857
0.797
1.257
1.885
1.753
1.169
45
0.479
0.464
0.718
0.653
1.053
1.580
1.437
0.958
50
0.403
0.388
0.605
0.538
0.887
1.331
1.184
0.789
55
0.341
0.326
0.512
0.446
0.751
1.126
0.981
0.654
60
0.290
0.275
0.435
0.371
0.638
0.957
0.817
0.545
65
0.247
0.233
0.371
0.311
0.544
0.816
0.684
0.456
70
0.212
0.199
0.318
0.261
0.466
0.700
0.575
0.383
75
0.182
0.170
0.274
0.221
0.401
0.602
0.486
0.324
80
0.157
0.146
0.236
0.187
0.346
0.520
0.412
0.275
85
0.136
0.126
0.205
0.160
0.300
0.450
0.351
0.234
90
0.119
0.109
0.178
0.137
0.261
0.392
0.301
0.200
95
0.104
0.094
0.155
0.117
0.228
0.342
0.258
0.172
100
0.091
0.082
0.136
0.101
0.200
0.299
0.223
0.149
105
0.080
0.072
0.120
0.088
0.175
0.263
0.193
0.129
110
0.070
0.063
0.105
0.076
0.155
0.232
0.168
0.112
115
0.062
0.056
0.093
0.067
0.137
0.205
0.146
0.098
120
0.055
0.049
0.083
0.058
0.121
0.182
0.128
0.085
125
0.049
0.044
0.074
0.051
0.108
0.162
0.113
0.075
Part Number NCPppXM472 NCPppXH682 NCPppXW682 NCPppXH103 NCPppXV103 NCPppXH153 NCPppXW153 NCPppXH223
4.7kΩ
6.8kΩ
6.8kΩ
10kΩ
10kΩ
15kΩ
15kΩ
22kΩ
Resistance
3950K
3380K
B-Constant
3500K
3380K
3950K
3380K
3900K
3380K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
105.705
133.043
234.787
195.652
328.996
293.478
517.912
430.434
Y35
79.126
100.756
168.515
148.171
237.387
222.256
371.724
325.976
Y30
59.794
77.076
122.422
113.347
173.185
170.021
270.048
249.364
Y25
45.630
59.540
89.953
87.559
127.773
131.338
198.426
192.629
Y20
35.144
46.401
66.766
68.237
95.327
102.355
147.278
150.121
Y15
27.303
36.482
50.066
53.650
71.746
80.474
110.439
118.029
Y10
21.377
28.904
37.906
42.506
54.564
63.759
83.617
93.514
Y5
16.869
23.047
28.963
33.892
41.813
50.838
63.888
74.563
0
13.411
18.509
22.313
27.219
32.330
40.828
49.221
59.881
5
10.735
14.974
17.338
22.021
25.194
33.032
38.245
48.446
10
8.653
12.189
13.571
17.926
19.785
26.888
29.936
39.436
15
7.018
9.978
10.705
14.674
15.651
22.010
23.613
32.282
20
5.726
8.215
8.503
12.081
12.468
18.121
18.756
26.577
25
4.700
6.800
6.800
10.000
10.000
15.000
15.000
22.000
30
3.879
5.654
5.474
8.315
8.072
12.472
12.074
18.292
35
3.219
4.725
4.434
6.948
6.556
10.422
9.780
15.285
40
2.685
3.967
3.613
5.834
5.356
8.751
7.969
12.834
45
2.250
3.344
2.961
4.917
4.401
7.375
6.531
10.817
50
1.895
2.829
2.440
4.161
3.635
6.241
5.382
9.154
55
1.604
2.404
2.022
3.535
3.019
5.302
4.459
7.777
60
1.363
2.050
1.683
3.014
2.521
4.521
3.713
6.631
65
1.163
1.759
1.409
2.586
2.115
3.879
3.108
5.690
70
0.996
1.515
1.185
2.228
1.781
3.341
2.613
4.901
75
0.857
1.309
1.001
1.925
1.509
2.887
2.208
4.234
80
0.740
1.135
0.849
1.669
1.284
2.503
1.873
3.671
85
0.641
0.988
0.724
1.452
1.097
2.178
1.597
3.195
90
0.558
0.862
0.620
1.268
0.941
1.902
1.367
2.790
95
0.487
0.755
0.532
1.110
0.810
1.664
1.174
2.441
100
0.426
0.662
0.459
0.974
0.701
1.461
1.013
2.142
105
0.375
0.583
0.398
0.858
0.608
1.287
0.878
1.888
110
0.330
0.515
0.346
0.758
0.530
1.137
0.763
1.668
115
0.292
0.457
0.302
0.672
0.463
1.007
0.665
1.477
120
0.259
0.406
0.264
0.596
0.406
0.895
0.582
1.312
125
0.230
0.361
0.232
0.531
0.358
0.797
0.511
1.169
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
Continued on the following page.
2
15
4
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Continued from the preceding page.
4
Part Number NCPppXW223 NCPppWL223 NCPppWB333 NCPppWF333 NCPppWL333 NCPppWB473 NCPppWL473 NCPppWD683
22kΩ
22kΩ
33kΩ
33kΩ
33kΩ
47kΩ
47kΩ
68kΩ
Resistance
3950K
4485K
4050K
4250K
4485K
4050K
4485K
4150K
B-Constant
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
759.605
1073.436
1227.263
1451.049
1610.154
1747.920
2293.249
2735.359
Y35
545.196
753.900
874.449
1019.238
1130.850
1245.428
1610.605
1937.391
Y30
396.070
535.073
630.851
725.084
802.609
898.485
1143.110
1389.345
Y25
291.025
383.590
460.457
522.021
575.385
655.802
819.487
1008.014
Y20
216.008
277.643
339.797
379.842
416.464
483.954
593.146
738.978
Y15
161.977
202.813
253.363
279.371
304.219
360.850
433.281
547.456
Y10
122.638
149.462
190.766
207.566
224.193
271.697
319.305
409.600
Y5
93.702
111.082
144.964
155.639
166.623
206.463
237.312
309.217
0
72.191
83.233
111.087
117.814
124.850
158.214
177.816
235.606
5
56.093
62.858
85.842
89.925
94.287
122.259
134.287
180.980
10
43.907
47.831
66.861
69.204
71.747
95.227
102.184
140.139
15
34.633
36.664
52.470
53.675
54.996
74.730
78.327
109.344
20
27.509
28.304
41.471
41.937
42.455
59.065
60.467
85.929
25
22.000
22.000
33.000
33.000
33.000
47.000
47.000
68.000
30
17.709
17.214
26.430
26.143
25.822
37.643
36.776
54.167
35
14.344
13.557
21.298
20.845
20.335
30.334
28.962
43.421
40
11.688
10.744
17.266
16.723
16.115
24.591
22.952
35.016
45
9.578
8.566
14.076
13.498
12.849
20.048
18.301
28.406
50
7.894
6.871
11.538
10.954
10.306
16.433
14.679
23.166
55
6.540
5.543
9.506
8.940
8.314
13.539
11.842
18.997
60
5.446
4.497
7.870
7.334
6.746
11.209
9.607
15.657
65
4.559
3.669
6.549
6.046
5.503
9.328
7.837
12.967
70
3.832
3.009
5.475
5.011
4.513
7.798
6.428
10.794
75
3.239
2.481
4.595
4.170
3.721
6.544
5.300
9.021
80
2.748
2.056
3.874
3.487
3.084
5.518
4.393
7.575
85
2.342
1.713
3.282
2.928
2.569
4.674
3.659
6.387
90
2.004
1.434
2.789
2.469
2.151
3.972
3.063
5.407
95
1.722
1.206
2.379
2.091
1.809
3.388
2.577
4.598
100
1.486
1.019
2.038
1.777
1.529
2.902
2.178
3.922
105
1.287
0.866
1.751
1.516
1.299
2.494
1.849
3.359
110
1.119
0.739
1.509
1.298
1.108
2.150
1.578
2.887
115
0.975
0.633
1.306
1.116
0.949
1.860
1.352
2.489
120
0.854
0.545
1.134
0.962
0.817
1.615
1.164
2.155
125
0.750
0.471
0.987
0.832
0.707
1.406
1.006
1.870
Part Number NCPppWF683 NCPppWL683 NCPppWF104 NCP18WF104F NCPppWL104 NCPppWL154 NCPppWM154 NCPppWL224
150kΩ
150kΩ
220kΩ
Resistance
100kΩ
68kΩ
68kΩ
100kΩ
100kΩ±1%
4485K
4500K
4485K
B-Constant
4485K
4250K
4485K
4250K
4200K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
4879.254
7318.881
2990.041
7899.466
3317.893
10734.358
4397.119
4205.686
Y35
3426.818
5140.228
2100.247
5466.118
2330.237
7539.001
3088.599
2966.436
Y30
2432.149
3648.224
1494.113
3834.499
1653.862
5350.729
2197.225
2118.789
Y25
1743.590
2615.385
1075.679
2720.523
1185.641
3835.898
1581.881
1531.319
Y20
1262.012
1893.018
782.705
1951.216
858.168
2776.427
1151.037
1118.422
Y15
921.875
1382.813
575.674
1415.565
626.875
2028.126
846.579
825.570
Y10
679.373
1019.059
427.712
1036.984
461.974
1494.620
628.988
615.526
Y5
504.919
757.379
320.710
767.079
343.345
1110.822
471.632
463.104
0
378.333
567.499
242.768
572.667
257.266
832.332
357.012
351.706
5
285.717
428.575
185.300
431.264
194.287
628.577
272.500
269.305
10
217.414
326.121
142.603
327.405
147.841
478.310
209.710
207.891
15
166.654
249.981
110.602
250.538
113.325
366.639
162.651
161.722
20
128.653
192.979
86.415
193.166
87.484
283.036
127.080
126.723
25
100.000
150.000
68.000
150.000
68.000
220.000
100.000
100.000
30
78.247
117.370
53.871
117.281
53.208
172.143
79.222
79.439
35
61.622
92.433
42.954
92.293
41.903
135.569
63.167
63.509
40
48.835
73.252
34.460
73.090
33.208
107.436
50.677
51.084
45
38.937
58.406
27.814
58.240
26.477
85.662
40.904
41.336
50
31.231
46.846
22.572
46.665
21.237
68.708
33.195
33.628
55
25.195
37.793
18.422
37.605
17.133
55.429
27.091
27.510
60
20.441
30.661
15.113
30.453
13.900
44.970
22.224
22.621
65
16.675
25.013
12.459
24.804
11.339
36.686
18.323
18.692
70
13.677
20.516
10.325
20.293
9.300
30.090
15.184
15.525
75
11.277
16.916
8.592
16.679
7.668
24.810
12.635
12.947
80
9.346
14.019
7.185
13.776
6.356
20.562
10.566
10.849
85
7.785
11.678
6.033
11.428
5.294
17.128
8.873
9.129
90
6.517
9.776
5.087
9.520
4.432
14.338
7.481
7.713
95
5.482
8.223
4.309
7.966
3.728
12.061
6.337
6.546
100
4.634
6.951
3.661
6.688
3.151
10.194
5.384
5.572
105
3.935
5.902
3.124
5.639
2.676
8.657
4.594
4.764
110
3.357
5.035
2.675
4.772
2.283
7.385
3.934
4.087
115
2.877
4.315
2.299
4.052
1.956
6.329
3.380
3.518
120
2.476
3.714
1.983
3.454
1.684
5.448
2.916
3.040
125
2.141
3.211
1.715
2.955
1.456
4.710
2.522
2.634
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
Continued on the following page.
16
3
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)
Continued from the preceding page.
Part Number NCPppWM224 NCPppWM474
220kΩ
470kΩ
Resistance
4500K
4500K
B-Constant
Temp. (°C) Resistance (kΩ) Resistance (kΩ)
Y40
11585.884
24751.661
Y35
8016.973
17127.169
Y30
5623.931
12014.762
Y25
3990.100
8524.305
Y20
2861.784
6113.811
Y15
2076.162
4435.437
Y10
1520.909
3249.216
Y5
1125.049
2403.515
0
839.912
1794.358
5
632.521
1351.294
10
480.194
1025.870
15
367.455
785.018
20
283.310
605.252
25
220.000
470.000
30
172.012
367.480
35
135.364
289.186
40
107.198
229.014
45
85.419
182.485
50
68.441
146.215
55
55.153
117.828
60
44.665
95.420
65
36.379
77.718
70
29.763
63.584
75
24.462
52.260
80
20.205
43.166
85
16.761
35.808
90
13.962
29.828
95
11.684
24.961
100
9.809
20.955
105
8.270
17.668
110
6.998
14.951
115
5.942
12.695
120
5.067
10.824
125
4.334
9.259
4
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
4
17
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type !Caution/Notice
■ !Caution (Storage and Operating Conditions)
This product is designed for application in an
ordinary environment (normal room temperature,
humidity and atmospheric pressure).
Do not use under the following conditions because
all these factors can deteriorate the product
characteristics or cause failures and burn-out.
1. Corrosive gas or deoxidizing gas
(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,
Sulfuric acid gas, Nitric oxide gas, etc.)
■ !Caution (Others)
4
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damages that may be
caused by the abnormal function or the failure of our
product.
■ Notice (Storage and Operating Conditions)
To keep solderability of product from declining, the
following storage condition is recommended.
1. Storage condition:
Temperature -10 to +40 degrees C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Use this product within 6 months after delivery by
first-in and first-out stocking system.
3. Storage place:
Do not store this product in corrosive gas
(Sulfuric acid gas, Chlorine gas, etc.) or in direct
sunlight.
■ Notice (Rating)
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
■ Notice (Handling)
The ceramic of this product is fragile, and care must
be taken not to load an excessive press - force or
not to give a shock at handling.
Such forces may cause cracking or chipping.
18
2. Volatile or flammable gas
3. Dusty conditions
4. Under vacuum, or under high or low-pressure
5. Wet or humid locations
6. Places with salt water, oils, chemical liquids or
organic solvents
7. Strong vibrations
8. Other places where similar hazardous conditions
exist
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type !Caution/Notice
■ Notice (Soldering and Mounting)
1. Mounting Position
Choose a mounting position that minimizes the stress
imposed on the chip during flexing or bending of the
board.
Component Direction
Locate this
product
horizontal to the
direction in
which stress
acts.
Mounting Close to Board Separation Line
C
Perforation
Holes
A
B
Keep this product on the
PC Board away from the
Separation Line.
Worst ← A-C-B-D → Better
D
Slit
4
2. Allowable Soldering Temperature and Time
NCP03/15 Series
Allowable Reflow Soldering Temp. and Time
280
Temperature (°C)
(a) Solder within the temperature and time combinations,
indicated by the slanted lines in the fllowing graphs.
(b) The excessive soldering conditions may cause
dissolution of metallization or deterioration of solderwetting on the external electrode.
(c) In case of repeated soldering, the accumulated soldering
time should be within the range shown below figure. (For
example, Reflow peak temperature: 260°C, twice -> The
total accumulated soldering time at 260°C is within 30
seconds.)
270
260
250
240
230
220
0
10
20
30 40 50
Time (sec.)
60
70
80
90
NCP18/21 Series
Allowable Reflow Soldering Temp. and Time
280
280
270
270
Temperature (°C)
Temperature (°C)
Allowable Flow Soldering Temp. and Time
260
250
240
230
220
210
260
250
240
230
220
210
0
10
20
Time (sec.)
30
0 10 20 30 40 50 60 70 80 90 100 110
Time (sec.)
Continued on the following page.
1
19
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type !Caution/Notice
Continued from the preceding page.
3. Recommendable Temperature Profile for Soldering
NCP03/15 Series
Reflow Soldering Conditions
Temperature (°C)
(a) Insufficient preheating may cause a crack on ceramic
body. The difference between preheating temperature
and maximum temperature in the profile shall be 100 °C.
(b) Rapid cooling by dipping in solvent or by other means is
not recommended.
Preheating (in air)
Soldering
1-2 min.
*20sec.
300
Gradual Cooling
(in air)
200
100
0
* In case of repeated soldering, the accumulated soldering
time should be within the range shown above figure 2.
Preheating: 160±10°C, 1-2 min.
Soldering: 240-270°C, 20sec.
NCP18/21 Series
Flow Soldering Conditions
4
Soldering
300
Gradual Cooling
(in air)
Temperature (°C)
Temperature (°C)
Preheating (in air)
Reflow Soldering Conditions
200
100
0
1-2 min.
Preheating (in air)
Soldering
1-2 min.
*20sec.
300
Gradual Cooling
(in air)
200
100
0
*10sec.
Preheating: 160±10°C, 1-2 min.
Soldering: 230-270°C, 20sec.
Preheating: 160±10°C, 1-2 min.
Soldering: 230-260°C, 10sec.
4. Solder and Flux
(1) Solder and Paste
(a) Reflow Soldering: NCP03/15/18/21 Series
Use RA/RMA type or equivalent type of solder paste. For
your reference, we are using the solder paste below for
any internal tests of this product.
•RMA9086 90-4-M20 (Sn:Pb=63wt%:37wt%)
(Manufactured by Alpha Metals Japan Ltd.)
•M705-221BM5-42-11 (Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%)
(Manufactured by Senju Metal Industry Co., Ltd.)
(b) Flow Soldering: NCP18/21 Series
We are using the solder paste below for any internal tests
of this product.
•Sn:Pb=63wt%:37wt%
•Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%
(2) Flux
Use rosin type flux in soldering process.
If below flux is used, some problems might be caused in
the product characteristics and reliability.
Please do not use below flux.
• Strong acidic flux (with halide content exceeding
0.1wt%).
• Water-soluble flux
(*Water-soluble flux can be defined as non rosin type
flux including wash-type flux and non-wash-type flux.)
5. Cleaning Conditions
For removing the flux after soldering, observe the following
points in order to avoid deterioration of the characteristics or
any change of the external electrodes' quality.
• Please keep mounted parts and a substrate from an
occurance of resonace in ultrasonic cleaning.
• Please do not clean the products in the case of using a
non-washed type flux.
NCP03/15
NCP18/21
Solvent
Isopropyl Alcohol
Isopropyl Alcohol
Dipping Cleaning
Less than 5 minutes at
room temp. or less than
2 minutes at 40°C max.
Less than 5 minutes at
room temp. or less than
2 minutes at 40°C max.
Less than 5 minutes and
20W/r
Ultrasonic Cleaning
Frequency of 28kHz to
40kHz
Less than 1 minute and
20W/r
Frequency of several
10kHz to 100kHz
6. Drying
After cleaning, promptly dry this product.
Continued on the following page.
20
2
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type !Caution/Notice
Continued from the preceding page.
7. Printing Conditions of Solder Paste
The amount of solder is critical. Standard height of fillet is
shown in the table below.
Too much soldering may cause mechanical stress,
resulting in cracking, mechanical and/or electronic
damage.
Reference: Optimum Solder Amount
E
T
Electrode
Solder
Solder
Part Number
The Solder Paste Thickness
T
100µm
1/3EVTVE
NCP03
NCP15
150µm
1/3EVTVE
NCP18/NCP21
200µm
0.2mmVTVE
4
8. Adhesive Application and Curing
Thin or insufficient adhesive may result in loose
component contact with land during flow soldering.
Low viscosity adhesive causes chips to slip after
mounting.
3
21
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type Package
Minimum Quantity Guide
Quantity (pcs.)
Part Number
Paper Tape
NCP03
15000
NCP15
10000
NCP18
4000
NCP21
-
Embossed Tape
4000
Tape Carrier Packaging
1. Dimensions of Reel
2.0±0.5
ø60 W1.0
Y0
ø13.0±0.2
ø21.0±0.8
4
9.0 W1.0
Y0
ø180 W0
Y1.5
13.0±1.0
(in mm)
2. Taping Method
(1) A tape in a reel contains Leader unit and Trailer unit where
products are not packed. (Please refer to the figure right.)
(2) The top and base tapes or plastic and cover tape are not
Leader Unit
190-250
210-250
40 min.
Trailer Unit
Vacant Section Top Tape alone
Cover Tape alone
stuck at the first five pitches minimum.
(3) A label should be attached on the reel. (MURATA's part
Chip-mounting Unit
number, inspection number and quantity should be marked
on the label.)
(4) Taping reels are packed in a package.
Direction of Feed
(in mm)
Continued on the following page.
1
22
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type Package
Continued from the preceding page.
3. Paper Tape (NCP03/15/18 Series)
8.0±0.3
0.8 max.
3.5±0.05
0.38∗
Direction of Feed
ø1.5+0.1/–0
1.15∗
8.0±0.3
0.68∗
2.0±0.05
4.0±0.1
0.5 max.
3.5±0.05
ø1.5+0.1/–0
1.75±0.1
2.0±0.05
4.0±0.1
1.75±0.1
NCP15 Series
NCP03 Series
0.65∗
∗ Reference Value
Direction of Feed
∗ Reference Value
1.1 max.
1.85∗
4
8.0±0.3
ø1.5+0.1/–0
3.5±0.05
2.0±0.05
4.0±0.1
4.0±0.1
1.75±0.1
NCP18 Series
1.05∗
Direction of Feed
∗ Reference Value
(in mm)
(1) Other Conditions
(a) Packaging
Products are packaged in the cavity of the base tape and
sealed by top tape and bottom tape.
(b) Tape
Top tape and bottom tape have no joints and products
are packaged and sealed in the cavity of the base tape,
continuously.
(2) Peeling Force of Top Tape
165-180 °
F
∗ 1 Peeling angle: 165 to 180 degrees against the fixed surface of tape.
∗ 2 Peeling speed: 300mm/min.
∗ 3 Peeling force: 0.1 - 0.6N
(3) Pull Strength
Pull strength of top tape is specified at 10N minimum.
Pull strength of bottom tape should be specified 5N minimum.
Continued on the following page.
232
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temp. Sensor and Compensation Chip Type Package
Continued from the preceding page.
4. Embossed Tape (NCP21 Series)
2.0±0.05
4.0±0.1
4.0±0.1
Products are packaged in each cavity of the Embossed
tape and sealed by Cover tape.
+0.1
φ1.5 -1
2.25∗
Cover tape has no joints.
3.5±0.05
(b) Tape
φ1.0 +0.3
-0
1.05
0.2
8.0±0.3
(a) Packaging
1.75±0.1
(1) Other Conditions
1.45∗
∗ Reference Value
Direction of Feed
(in mm)
(2) Peeling Force of Cover Tape
165-180 °
F
4
∗ 1 Peeling angle: 165 to 180 degrees against the fixed surface of tape.
∗ 2 Peeling speed: 300mm/min.
∗ 3 Peeling force: 0.1 - 0.7N
(3) Tape Strength
Pull strength of Embossed tape and Cover tape should be
specified 10N minimum.
3
24
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
for Temperature Sensor Thermo String Type
1.2±0.4
1.2±0.4
This product is a small flexible lead type NTC Thermistor
with the small head and the thin lead wire.
25 to 100±2
110 to 150±3
■ Features
ø0.30±0.05
3+2/-1
1. High accuracy and high sensibility temperature sensing
is available by the small size and high accuracy NTC
Thermistor.
2. Narrow space temperature sensing is available by the
small sensing head and the thin lead wire.
3. Flexibility and wide variety length (25 mm to 150mm)
enables designing flexible temperature sensing
architectures.
4. This product is compatible with our 0402 (EIA) size
chip Thermistor.
5. Excellent long time aging stability
6. This is halogen free product. *
* Cl= max.900ppm, Br=max.900ppm and
Cl+Br=max.1500ppm
7. NXFT series are recognized by UL/cUL.
(UL1434, File No.E137188).
The full length 25mm, 30 to 150mm Interval 10mm.
(in mm)
NXFT15_1B Type(twist)
1.2±0.4
25 to 100±2
110 to 150±3
1.2±0.4
ø0.30±0.05
3+2/-1
■ Applications
5
1. Temperature compensation for transistor, IC and
crystal oscillator in mobile communications
2. Temperature sensor for rechargeable batteries
3. Temperature compensation of LCD
4. Temperature compensation in general use of electric
circuits
The full length 25mm, 30 to 150mm Interval 10mm.
(in mm)
NXFT15_2B Type(without twist)
Part Number
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
(25-80°C)
(25-85°C)
(25-100°C)
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
Operating Current
for Sensor (25°C)
(mA)
Rated Electric Typical Dissipation Thermal Time
Power (25°C) Constant (25°C)
Constant
(mW)
(mW/°C)
(s)
NXFT15XH103FApBppp
10k
3380 ±1%
3423
3431
3452
0.12
7.5
1.5
4
NXFT15WB473FApBppp
47k
4050 ±1%
4091
4097
4114
0.06
7.5
1.5
4
NXFT15WF104FApBppp
100k
4250 ±1%
4303
4311
4334
0.04
7.5
1.5
4
p is the fulled with lead shape (1:twist, 2:without twist).
ppp is the fulled with Total-length codes. (25mm, 30 to 150mm interval 10mm, ex. 050=50mm)
Operating Current for Sensor rises Thermistor's temperature by 0.1.°C
Rated Electric Power is necessary electric power that Thermistor's temperature rises 5°C by self heating at 25°C in still air.
Operating Temperature Range: -40°C to +125°C
25
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temperature Sensor Thermo String Type Specifications and Test Methods
No.
Item
1
High Temperature
Storage Test
2
Low Temperature
Storage Test
3
Humidity
Storage Test
4
Temperature
Cycle
5
High Temperature
Load
6
Insulation Break down Voltage
Specifications
· Resistance (R25°C) fluctuation rate: less than ±1%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
Test Methods
125±2°C in air, for 1000 +48/-0 hours without loading.
-40 +0/-3°C in air, for 1000 +48/-0 hours without loading.
60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without
loading.
· Resistance (R25°C) fluctuation rate: less than ±2%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
-40 +0/-3°C, 30 minutes in air
+25±2°C, 10 to 15 minutes in air
+125±2°C, 30 minutes in air
+ 25 +2/-0°C, 10 to 15 minutes in air (1 cycle)
Continuous 100 cycles, without loading.
85±2°C in air, with 'Operating Current for Sensor' for 1000
+48/-0 hrs.
· No damage electrical characteristics on DC100 V, 1 min.
2mm length of coating resin from the top of Thermistor is to be
dipped into beads of lead (Pb), and DC100V 1 minute is
applied to circuit between beads of lead (Pb) and lead wire.
Both lead wires are dipped into 350±10°C solder for 3.5±0.5
seconds, or 260±5°C solder for 10±1 seconds according to
Fig-1. (solder <JIS Z 3282 H60A>)
7
Resistance to
Soldering Heat
· Resistance (R25°C) fluctuation rate: less than ±1%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
5
1 to 2mm
Solder
Fig-1
8
Solderability
More than 90% of lead wire surface shall be covered by solder.
Both lead wires are dipped into flux (25wt% colophony <JIS K
5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds.
Then both lead wires are dipped into 235±5°C solder
<JIS Z 3282 H60A> for 2±0.5 seconds according to Fig-1.
The lead wire shall be inserted in a ø1.0mm hole until resin part
contacts with a substrate as shown in fig.-2. And 1N force for
10 seconds shall be applied to the lead wire.
9
Lead Wire
Pull Strength
· Resistance (R25°C) fluctuation rate: less than ±1%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
1N (10 sec.)
Fig-2
Hold the lead wires like Fig-3. Bend by 90 degrees and again
bend back to the initial position. Then bend to the other side by
90 degrees and again bend back to the initial position. After
bending process, 10N force for 3 seconds shall be applied to
the lead wire.
10
Lead Wire
Bending Strength
· Lead wire does not break.
10N (3 sec.)
Fig-3
* · R25 is zero-power resistance at 25°C.
· B25/50 is calculated by zero-power resistance of Thermistor in 25°C -50°C.
· After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).
Continued on the following page.
26
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temperature Sensor Thermo String Type Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Test Methods
NTC Thermistor shall be dropped without any force onto
concrete floor from 1 meter height one time.
11 Free Fall
NTC Thermistor shall be fixed to the vibration test equipment.
Vibration of total 1.5 mm amplitude, Frequency sequence of
10Hz - 55Hz - 10Hz in 1 minute, shall be applied for right
angled 3 directions for each 2 hours duration.
12 Vibration
· Resistance (R25°C) fluctuation rate: less than ±1%.
· B-Constant (B25/50°C) fluctuation rate: less than ±1%.
· No visible damage at resin part.
Mount
The oscillating
Direction Z
Solder is attached
from the reverse side.
The oscillating
Direction Y
The oscillating
Direction X
* · R25 is zero-power resistance at 25°C.
· B25/50 is calculated by zero-power resistance of Thermistor in 25°C -50°C.
· After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).
5
27
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
for Temperature Sensor Lead Type
3.0 max. (∗3.3 max.)
1.8 max. (∗2.5 max.)
6.0 max.
This product is a sensor type NTC Thermistor to be
useful in the normal temperature range developed by
the unique ceramic technology and the automatic
assembly.
31±1
Epoxy Resin
■ Features
1. High-accuracy of B-Constant tolerance +/-0.5%
+/-1% of resistance and +/-0.5% of B-Constant is
realized due to technical advantages of the
material and manufacturing process.
2. Quick response
This product provides faster response time due
to its smaller size.
3. Taping type is available.
4. Strong lead strength
Original lead-wiring technique assures reliable
connection. It can be formed and bent flexibly
according to the mounting conditions.
Solder Plated Copper Ply Wire
ø0.4±0.03
2.5±1.0
∗ Applicable to NTSA0XM202, NTSA0WB203
and NTSA0WC303 Types.
(in mm)
■ Applications
1. Rechargeable batteries
2. Battery charging circuits
3. Head of printers
4. DC fan motors
5. Home appliance equipments
6
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
NTSA0XM202pE1B0
2.0k
3500 ±0.5%
3523
3526
3543
1.05
21
2.1
7
NTSA0XR502pE1B0
5.0k
3700 ±1%
3727
3738
3760
0.68
15
1.5
7
NTSA0XH103pE1B0
10k
3380 ±0.5%
3428
3434
3455
0.38
15
1.5
7
NTSA0XV103pE1B0
10k
3900 ±0.5%
3930
3934
3944
0.46
15
1.5
7
NTSA0WB203pE1B0
20k
4050 ±1%
4078
4080
4096
0.31
21
2.1
7
NTSA0WC303pE1B0
30k
4100 ±1%
4128
4130
4147
0.26
21
2.1
7
NTSA0WD503pE1B0
50k
4150 ±1%
4205
4213
4234
0.20
15
1.5
7
NTSA0WF104pE1B0
100k
4250 ±1%
4303
4311
4334
0.14
15
1.5
7
Part Number
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation Thermal Time
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
Constant
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
(s)
A blank column is filled with resistance tolerance codes (F: ±1%, E: ±3%).
Rated Electric Power is necessary electric power that Thermistor's temperature rises 10°C by self heating at 25°C in still air.
Operating Temperature Range: -40°C to +125°C
Taping type of part numbers with "N6A0" is available (Lead spacing=5mm).
28
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
for Temperature Sensor Lead Insulation Type
3.0 max. (∗3.8 max.)
2.0 max. (∗2.5 max.)
1. Electric insulation on lead wire
2. Excellent bending resistance due to suitable
hardness of surface coating
3. Easy handling due to most suitable hardness of
surface of coating
4. High-accuracy of B-Constant tolerance +/-0.5%
+/-1% of resistance and +/-0.5% of B-Constant is
realized due to technical advantages of the
material and manufacturing process.
0.60-0.95
3±1.5
2.5 −0.5
5±1
+1.5
■ Features
27.0±2.0
(Coating Area)
This product is a sensor type NTC Thermistor to be
useful in the normal temperature range developed by
the unique ceramic technology and the automatic
assembly.
ø0.4±0.03
(Solder Plated
Copper Ply Wire)
NTSD0 Series
∗ Applicable to NTSD0XM202, NTSD0WB203
and NTSD0WC303 Types.
3.0 max. (∗3.8 max.)
(in mm)
2.0 max. (∗2.5 max.)
Epoxy Resin
+1.5
2.5-0.5
1. Rechargeable batteries
2. Battery charging circuits
3. Head of printers
4. DC fan motors
5. Home appliance equipments
2.5±1.2
■ Applications
L ±2.0
ø0.46±0.03
Polyurethane Wire
ø0.45±0.05
Sn-Ag Solder Copper Wire
∗ NTSD1XM202/NTSD1WB203/NTSD1WC303 Types
Type
NTSD1_FPB30
NTSD1_FPB40
NTSD1_FPB50
NTSD1 Series
(0.8)
(in mm)
L (mm)
30
40
50
NTSD0 Series
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
NTSD0XM202pE1B0
2.0k
3500 ±0.5%
3523
3526
3543
1.05
21
2.1
7
NTSD0XR502pE1B0
5.0k
3700 ±1%
3727
3738
3760
0.68
15
1.5
7
NTSD0XH103pE1B0
10k
3380 ±0.5%
3428
3434
3455
0.38
15
1.5
7
NTSD0XV103pE1B0
10k
3900 ±0.5%
3930
3934
3944
0.46
15
1.5
7
NTSD0WB203pE1B0
20k
4050 ±1%
4078
4080
4096
0.31
21
2.1
7
NTSD0WC303pE1B0
30k
4100 ±1%
4128
4130
4147
0.26
21
2.1
7
NTSD0WD503pE1B0
50k
4150 ±1%
4205
4213
4234
0.20
15
1.5
7
NTSD0WF104pE1B0
100k
4250 ±1%
4303
4311
4334
0.14
15
1.5
7
Part Number
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation Thermal Time
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
Constant
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
(s)
7
A blank column is filled with resistance tolerance codes (F: ±1%, E: ±3%).
Rated Electric Power is necessary electric power that Thermistor's temperature rises 10°C by self heating at 25°C in still air.
Operating Temperature Range: -40°C to +125°C
NTSD1 Series
Part Number
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation Thermal Time
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
Constant
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
(s)
NTSD1XM202FPBpp
2.0k ±1% 3500 ±0.5%
3523
3526
3543
1.05
21
2.1
7
NTSD1XR502FPBpp
5.0k ±1%
3727
3738
3760
0.68
15
1.5
7
NTSD1XH103FPBpp
10k ±1% 3380 ±0.5%
3428
3434
3455
0.38
15
1.5
7
NTSD1XV103FPBpp
10k ±1% 3900 ±0.5%
3930
3934
3944
0.46
15
1.5
7
NTSD1WB203FPBpp
20k ±1%
4050 ±1%
4078
4080
4096
0.31
21
2.1
7
NTSD1WC303FPBpp
30k ±1%
4100 ±1%
4128
4130
4147
0.26
21
2.1
7
3700 ±1%
Continued on the following page.
29
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Resistance
(25°C)
(ohm)
B-Constant
(25-50°C)
(K)
NTSD1WD503FPBpp
50k ±1%
4150 ±1%
4205
4213
4234
0.20
15
1.5
7
NTSD1WF104FPBpp
100k ±1%
4250 ±1%
4303
4311
4334
0.14
15
1.5
7
Part Number
B-Constant
B-Constant
B-Constant
Permissive Operating Rated Electric Typical Dissipation Thermal Time
(25-80°C)
(25-85°C)
(25-100°C)
Current (25°C)
Power (25°C) Constant (25°C)
Constant
(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)
(mA)
(mW)
(mW/°C)
(s)
A blank column is filled with Total-length codes. (30, 40, 50)
Rated Electric Power is necessary electric power that Thermistor's temperature rises 10°C by self heating at 25°C in still air.
Operating Temperature Range: -40°C to +125°C
■ Temperature Tolerance - Temperature Characteristics
Resistance Tolerance: +/-1% B-Constant Tolerance: +/-1%
Resistance Tolerance: +/-1% B-Constant Tolerance: +/-0.5%
2.0
1.0
0
-50
7
30
3.0
Temperature Tolerance (±°C)
Temperature Tolerance (±°C)
3.0
0
50
Temperature (°C)
100
150
2.0
1.0
0
-50
0
50
Temperature (°C)
100
150
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temperature Sensor Temperature Characteristics (Center Value)
Part Number NXFpXH103
NXFpWB473
NXFpWF104
10kΩ
47kΩ
100kΩ
Resistance
3380K
4050K
4250K
B-Constant
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
197.388
1690.590
4221.280
Y35
149.395
1215.320
2995.040
Y30
114.345
882.908
2147.000
Y25
88.381
647.911
1554.600
Y20
68.915
480.069
1136.690
Y15
54.166
359.009
839.019
Y10
42.889
270.868
624.987
Y5
34.196
206.113
469.678
0
27.445
158.126
355.975
5
22.165
122.267
272.011
10
18.010
95.256
209.489
15
14.720
74.754
162.559
20
12.099
59.075
127.057
25
10.000
47.000
100.000
30
8.309
37.636
79.222
35
6.939
30.326
63.167
40
5.824
24.583
50.677
45
4.911
20.043
40.904
50
4.160
16.433
33.195
55
3.539
13.545
27.091
60
3.024
11.223
22.224
65
2.593
9.345
18.323
70
2.233
7.818
15.184
75
1.929
6.571
12.635
80
1.673
5.548
10.566
85
1.455
4.704
8.873
90
1.270
4.004
7.481
95
1.112
3.422
6.337
100
0.976
2.936
5.384
105
0.860
2.528
4.594
110
0.759
2.184
3.934
115
0.673
1.893
3.380
120
0.598
1.646
2.916
125
0.532
1.436
2.522
Part Number NTSppXM202 NTSppXR502 NTSppXH103 NTSppXV103 NTSppWB203 NTSppWC303 NTSppWD503 NTSppWF104
Resistance
20kΩ
30kΩ
50kΩ
100kΩ
2.0kΩ
5.0kΩ
10kΩ
10kΩ
B-Constant
3500K
3700K
3380K
3900K
4050K
4100K
4150K
4250K
Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)
Y40
733.007
44.657
1149.500
123.484
1948.575
195.652
4256.752
347.808
Y35
524.831
33.505
819.651
92.295
1387.289
148.171
3005.888
248.591
Y30
380.184
25.388
591.391
69.614
999.456
113.347
2148.514
179.973
Y25
277.845
19.402
430.529
52.860
728.895
87.559
1555.020
131.832
Y20
205.260
14.961
316.870
40.480
537.039
68.237
1137.312
97.679
Y15
153.642
11.644
236.337
31.275
399.167
53.650
839.314
73.119
Y10
116.016
9.133
177.842
24.339
299.469
42.506
625.338
55.301
Y5
88.125
7.198
134.630
19.154
226.186
33.892
469.127
42.257
0
67.522
5.716
102.816
15.148
172.393
27.219
355.224
32.582
5
52.168
4.571
79.183
11.964
132.857
22.021
272.045
25.324
10
40.617
3.682
61.460
9.520
103.089
17.926
209.803
19.847
15
31.847
2.987
48.045
7.624
80.430
14.674
162.713
15.679
20
25.151
2.437
37.834
6.160
63.201
12.081
127.117
12.478
25
20.000
2.000
30.000
5.000
50.000
10.000
100.000
10.000
30
16.014
1.651
23.955
4.082
39.825
8.315
79.215
8.068
35
12.902
1.371
19.249
3.354
31.918
6.948
63.150
6.552
40
10.457
1.143
15.560
2.773
25.733
5.834
50.649
5.353
45
8.527
0.958
12.657
2.299
20.877
4.917
40.885
4.399
50
6.993
0.807
10.354
1.914
17.034
4.161
33.195
3.635
55
5.771
0.683
8.525
1.607
13.929
3.535
27.014
3.020
60
4.789
0.582
7.058
1.356
11.439
3.014
22.079
2.521
65
3.992
0.497
5.869
1.149
9.485
2.586
18.226
2.115
70
3.343
0.426
4.905
0.978
7.906
2.228
15.124
1.783
75
2.809
0.367
4.113
0.834
6.614
1.925
12.598
1.510
80
2.376
0.318
3.472
0.714
5.558
1.669
10.542
1.284
85
2.020
0.276
2.945
0.612
4.686
1.452
8.852
1.096
90
1.724
0.240
2.509
0.527
3.967
1.268
7.463
0.939
95
1.476
0.210
2.143
0.456
3.373
1.110
6.321
0.808
100
1.264
0.183
1.832
0.396
2.878
0.974
5.374
0.698
105
1.085
0.161
1.571
0.345
2.465
0.858
4.585
0.605
110
0.935
0.142
1.350
0.302
2.118
0.758
3.925
0.527
115
0.812
0.125
1.171
0.264
1.828
0.671
3.376
0.460
120
0.708
0.111
1.019
0.232
1.583
0.596
2.913
0.403
125
0.617
0.099
0.886
0.205
1.374
0.531
2.520
0.354
Detailed Resistance - Temperature Tables are downloadable from the following URL.
http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en
1
31
7
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temperature Sensor Thermo String Type/Lead Type !Caution/Notice
■ !Caution (Storage and Operating Conditions)
This product is designed for application in an
ordinary environment (normal room temperature,
humidity and atmospheric pressure).
Do not use under the following conditions because
all these factors can deteriorate the product
characteristics or cause failures and burn-out.
1. Corrosive gas or deoxidizing gas
(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,
Sulfuric acid gas, Nitric oxide gas, etc.)
2. Volatile or flammable gas
3. Dusty conditions
4. Under vacuum, or under high or low-pressure
5. Wet or humid locations
6. Places with salt water, oils, chemical liquids or
organic solvents
7. Strong vibrations
8. Other places where similar hazardous conditions
exist
■ !Caution (Others)
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damages that may be
caused by the abnormal function or the failure of our
product.
■ Notice (Storage and Operating Conditions)
To keep solderability of product from declining, the
following storage condition is recommended.
1. Storage condition:
Temperature -10 to +40 degrees C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Use this product within 6 months after delivery by
first-in and first-out stocking system.
■ Notice (Rating)
7
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
■ Notice (Soldering and Mounting) NTS Series
1. Be sure that the preheat-up does not melt the
soldering of this product. Excessive heat may
cause failure to open, short or insulation break
down.
2. Do not touch the body with soldering iron.
The soldering point should be min. 5mm away from
the root of lead wire.
32
3. Handling after unpacking:
After unpacking, reseal product promptly or
store it in a sealed container with a drying agent.
4. Storage place:
Do not store this product in corrosive gas
(Sulfuric acid gas, Chlorine gas, etc.) or in direct
sunlight.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temperature Sensor Thermo String Type/Lead Type !Caution/Notice
■ Notice (Soldering and Mounting) NXF Series
Please notice as shown below when you mount this product.
1. Do not melt the solder in resin head, when you solder
this product. If you melt the solder in resin head,
it has posibility that the break of wire, short and
break of lead insulation. In case you cut the lead
wire of this product less than 20mm from resin head,
the heat of melted solder at lead wire edge is
propagated easily to the resin head along the lead
wire.
2. Do not touch the resin head directly by solder iron.
It may cause the melt of solder in resin head.
3. Do not separate the parallel lead wires 10mm or less
from theresin head, when you separate parallel lead
wires.
4. If you mold by resin this product, please evaluate
the qualityl of this product before you use it.
5. Do not bend the lead wire radius 1mm or less when
you bend the lead wire.
■ Notice (Handling)
1. The ceramic element of this product is fragile, and
care must be taken not to load an excessive
press-force or not to give a shock at handling.
Such forces may cause cracking or chipping.
2. Do not apply an excessive force to the lead.
Otherwise, it may cause junction between lead and
element to break or crack. Holding element by side
lead wire is recommended when lead wire is bent or
cut.
7
33
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Temperature Sensor Thermo String Type/Lead Type Package
Minimum Quantity
Minimum Quantity (pcs.)
Part Number
Bulk
Ammo Pack Taping
NXF
1000
-
NTSA
500
3000
NTSD0
500
-
NTSD1_30
500
-
NTSD1_40
200
-
NTSD1_50
200
-
Taping Dimensions (NTSA_N6A0 Series)
∆S
P
P2
∆h2
∆h1
T
D
e
H2
P1
ød
W2
F
H0
L
W0
W1
W
t2
I
P0
Item
7
t1
øD0
Code
Dimensions (mm)
Pitch of Component
P
12.7
Pitch of Sprocket Hole
P0
12.7±0.3
Lead Spacing
F
5.0+0.8/–0.2
Length from Hole Center to Component Center
P2
6.35±1.3
Length from Hole Center to Lead
P1
3.85±0.8
Body Diameter
D
3.5 max.
Deviation along Tape, Left or Right
∆S
0±2.0
Carrier Tape Width
W
18.0±0.5
Position of Sprocket Hole
W1
9.0±0.5
Lead Distance between Reference and Bottom Planes
H0
16.0±1.0
Height of Component
H2
4.0 max.
I
+0.5 to –1.0
Protrusion Length
Diameter of Sprocket Hole
Lead Diameter
D0
4.0±0.1
d
0.50±0.03
Total Tape Thickness
t1
0.6±0.3
Total Thickness, Tape and Lead Wire
t2
1.6 max.
∆h1, ∆h2
1.0 max.
L
11.0+0/–2.0
Hole Down Tape Width
W0
11.0 min.
Hole Down Tape Position
W2
1.5±1.5
Coating Extension on Lead
e
Up to the crimp point
Body Thickness
T
2.6 max.
Deviation across Tape
Portion to Cut in Case of Defect
(in mm)
34
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
NTC Thermistors
for Inrush Current Suppression Lead Type
NTPAN : 23.0 max.
NTPAJ : 20.0 max.
■ Features
Coating Extension
on Lead : to line A
A
3.5±1.0
1. Lead is not contained in the ceramic element, the
terminations, the solder for inner connection and
the coating resin.
2. Most suitable for power supplies of less than 100W
3. Excellent recovery characteristics due to resin
coating with excellent heat characteristics
4. Highly reliable
5.5 max.
10.0 max.
This product effectively supresses surge currents
which are generated when switching power regulators
are turned on.
NTPAN/NTPAJ Series
ø0.8±0.05
Sn plated Cu wire
10.0±1.5
(in mm)
NTPAD : 16.0 max.
NTPAA : 12.0 max.
■ Applications
10.0 max.
1. Switching power supplies
2. CRT monitors
3. Color televisions
4. VCR-Power supplies
5. Other power circuits
5.5 max.
5.0 max.
Coating Extension
on Lead : to line A
3.5±1.0
A
NTPAD/NTPAA Series
ø0.8±0.05
Sn plated Cu wire
7.5±1.5
(in mm)
5.0 max.
6.0 max.
NTPA9 : 11.0 max.
NTPA7 : 9.0 max.
Coating Extension
on Lead : to line A
3.5±1.0
A
NTPA7/NTPA9 Series
ø0.6±0.05
Sn plated Cu wire
5.0±1.5
(in mm)
Resistance
(25°C)
(ohm)
Permissible Max.
Current (25°C)
(A)
Permissible Max.
Current (55°C)
(A)
Thermal Time
Constant (25°C)
(s)
Thermal Dissipation
Constant (25°C)
(mW/°C)
NTPAN3R0LDKB0
3.0 ±15%
5.4
4.7
135
26.8
NTPAN4R0LDKB0
4.0 ±15%
4.7
4.1
130
26.8
NTPAN6R0LDKB0
6.0 ±15%
3.9
3.4
130
26.8
NTPAJ4R0LDKB0
4.0 ±15%
4.0
3.5
125
21.8
NTPAJ6R0LDKB0
6.0 ±15%
3.4
2.9
125
21.8
NTPAJ8R0LDKB0
8.0 ±15%
3.0
2.6
130
21.8
NTPAJ100LDKB0
10.0 ±15%
2.6
2.2
130
21.8
NTPAD3R9LDNB0
3.9 ±15%
3.3
2.9
65
18.2
NTPAD5R1LDNB0
5.1 ±15%
3.0
2.6
85
18.8
NTPAD8R0LDNB0
8.0 ±15%
2.7
2.3
65
18.7
NTPAD160LDNB0
16.0 ±15%
2.0
1.7
100
19.1
NTPAA2R2LDNB0
2.2 ±15%
3.7
3.2
70
13.5
Part Number
Continued on the following page.
35
8
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Resistance
(25°C)
(ohm)
Permissible Max.
Current (25°C)
(A)
Permissible Max.
Current (55°C)
(A)
Thermal Time
Constant (25°C)
(s)
Thermal Dissipation
Constant (25°C)
(mW/°C)
NTPAA3R9LDNB0
3.9 ±15%
2.7
2.3
70
13.5
NTPAA5R1LDNB0
5.1 ±15%
2.5
2.2
70
13.5
NTPAA8R2LDNB0
8.2 ±15%
2.0
1.7
70
13.5
NTPAA100LDNB0
10.0 ±15%
1.7
1.5
70
13.5
NTPA9160LBMB0
16.0 ±15%
1.4
1.2
65
11.6
NTPA74R0LBMB0
4.0 ±15%
2.3
2.0
40
9.4
NTPA78R0LBMB0
8.0 ±15%
1.7
1.5
40
9.5
NTPA7160LBMB0
16.0 ±15%
1.2
1.0
40
9.9
NTPA7220LBMB0
22.0 ±15%
1.0
0.88
40
9.1
Part Number
NTPAD/NTPAA/NTPA9/NTPA7 series are also availabe on tape. The final alphabet of the part number should be "DNB0=>D6A0", "BNB0 =>B1A0".
Operating Temperature Range: -20°C to +160°C
■ Permissible Electrolytic Capacitor
Voltage (AC)
100Vrms
120Vrms
132Vrms
220Vrms
240Vrms
264Vrms
NTPAN
8600µF
5972µF
4936µF
1777µF
1493µF
1234µF
NTPAJ
5000µF
3472µF
2870µF
1033µF
868µF
717µF
NTPAD
2700µF
1875µF
1550µF
558µF
469µF
387µF
NTPAA
1400µF
972µF
803µF
289µF
243µF
201µF
NTPA9
800µF
556µF
459µF
165µF
139µF
115µF
NTPA74R0
700µF
486µF
402µF
145µF
122µF
100µF
NTPA78R0
570µF
396µF
327µF
118µF
99µF
82µF
400µF
278µF
230µF
83µF
69µF
57µF
Part Number
NTPA7160
NTPA7220
■ Application Circuit
■ Determination of Allowable Current
1.0
−t˚
+
−
Max. Current Ratio
NTC
0.5
0
8
36
20
40
60
80
100
Ambient Temperature (˚C)
120
140
160
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
■ NTPAN3R0L Type
■ NTPAN4R0L Type
Ta=25˚C
Ta=25˚C
1
100
0.1
0.1
1
10
1
1
100
0.1
0.01
0.01
10
0.1
Current (A)
Current (A)
■ NTPAN6R0L Type
■ NTPAJ4R0L Type
Ta=25˚C
Ta=25˚C
1
100
0.1
10
0.1
1
10
1
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
1
100
0.1
0.01
0.01
10
0.1
Current (A)
■ NTPAJ8R0L Type
Ta=25˚C
Ta=25˚C
1000
1
100
0.1
10
0.1
1
Current (A)
1
10
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
Thermistor's Temperature (˚C)
10
Resistance Ratio (Rt/R25)
1
10
1
Current (A)
■ NTPAJ6R0L Type
0.01
0.01
Thermistor's Temperature (˚C)
1000
Thermistor's Temperature (˚C)
10
0.01
0.01
1
10
1
1
100
0.1
0.01
0.01
10
0.1
1
Thermistor's Temperature (˚C)
0.01
0.01
10
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
Thermistor's Temperature (˚C)
1000
Thermistor's Temperature (˚C)
10
1
10
8
Current (A)
Continued on the following page.
37
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
Continued from the preceding page.
■ NTPAJ100L Type
■ NTPAD3R9L Type
Ta=25˚C
Ta=25˚C
1
100
0.1
0.1
1
10
1
1
100
0.1
0.01
0.01
10
0.1
Current (A)
Current (A)
■ NTPAD5R1L Type
■ NTPAD8R0L Type
Ta=25˚C
Ta=25˚C
1
100
0.1
10
0.1
1
10
1
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
1
100
0.1
0.01
0.01
10
0.1
Current (A)
■ NTPAA2R2L Type
Ta=25˚C
Ta=25˚C
1000
1
100
0.1
10
0.1
1
Current (A)
1
10
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
Thermistor's Temperature (˚C)
10
0.01
0.01
1
10
1
Current (A)
■ NTPAD160L Type
8
1
100
0.1
0.01
0.01
10
0.1
1
1
10
Current (A)
Continued on the following page.
38
Thermistor's Temperature (˚C)
1000
Thermistor's Temperature (˚C)
10
0.01
0.01
1
10
1
Thermistor's Temperature (˚C)
0.01
0.01
10
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
Thermistor's Temperature (˚C)
1000
Thermistor's Temperature (˚C)
10
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
Continued from the preceding page.
■ NTPAA3R9L Type
■ NTPAA5R1L Type
Ta=25˚C
Ta=25˚C
1000
100
0.1
10
0.01
0.01
0.1
1
10
1
1
Thermistor's Temperature (˚C)
1
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
Thermistor's Temperature (˚C)
10
100
0.1
10
0.01
0.01
0.1
Current (A)
1
10
1
Current (A)
■ NTPAA8R2L Type
■ NTPAA100L Type
Ta=25˚C
1
100
0.1
10
0.01
0.01
0.1
1
100
0.1
0.01
0.01
1
10
1
1000
Resistance Ratio
Thermistor's Temperature
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
Ta=25°C
10
10
Thermistor's temperature (˚C)
1000
Thermistor's Temperature (˚C)
10
1
0.1
1
10
Current (A)
Current (A)
■ NTPA9160L Type
■ NTPA74R0L Type
Ta=25˚C
0.1
0.01
0.01
10
1
0.1
1
Current (A)
10
1
100
0.1
0.01
0.01
10
0.1
1
Thermistor's Temperature (˚C)
100
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature
1
10
1000
Thermistor's temperature (˚C)
Ta=25°C
10
1
10
8
Current (A)
Continued on the following page.
39
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)
Continued from the preceding page.
■ NTPA78R0L Type
■ NTPA7160L Type
Ta=25˚C
Ta=25˚C
1
100
0.1
0.01
0.01
10
0.1
1
10
1
Ta=25˚C
1000
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
1
100
0.1
10
1
Current (A)
8
40
1
10
Thermistor's Temperature (˚C)
10
0.1
100
0.1
10
0.1
1
Current (A)
■ NTPA7220L Type
0.01
0.01
1
0.01
0.01
Current (A)
1000
Resistance Ratio
Thermistor's Temperature (˚C)
Resistance Ratio (Rt/R25)
Resistance Ratio (Rt/R25)
Resistance Ratio
Thermistor's Temperature (˚C)
10
1
10
Thermistor's Temperature (˚C)
1000
Thermistor's Temperature (˚C)
10
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Inrush Current Suppression Lead Type !Caution/Notice
■ !Caution (Storage and Operating Conditions)
1. This product is designed for the Switching Power
Supply with smoothing capacitors.
Other applications of this product may result in
fire.
2. Use this product within the specified maximum
current. Otherwise it may catch fire in the worst
case.
3. Use this product with smoothing capacitor within
the specified maximum capacitance value. Otherwise
it may catch fire in the worst case.
4. This product is designed for application in an
ordinary environment
(normal room temperature, humidity and atmospheric
pressure).
Do not use under the following conditions because
all these factors can deteriorate the
product characteristics cause failure and burn-out.
(1) Corrosive gas or deoxidizing gas.
(Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) Volatile or flammable gas
(3) Dusty conditions
(4) Under high or low pressure
(5) Wet or humid conditions
(6) Near with salt water, oils, chemical liquids or
organic solvents
(7) Strong vibrations
(8) Other places where similar hazardous conditions
exist.
■ !Caution (Others)
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damages that may be
caused by the abnormal function or the failure of our
product.
■ Notice (Storage and Operating Conditions)
To keep solderability of product from declining, the
following storage condition is recommended.
1. Storage condition:
Temperature -10 to +40 degrees C
Humidity less than 75%RH (not dewing condition)
2. Storage term:
Use this product within 6 months after delivery by
first-in and first-out stocking system.
3. Handling after unpacking:
After unpacking, reseal product promptly or
store it in a sealed container with a drying agent.
4. Storage place:
Do not store this product in corrosive gas
(Sulfuric acid gas, Chlorine gas, etc.) or in direct
sunlight.
■ Notice (Rating)
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
8
■ Notice (Soldering and Mounting)
1. Be sure that the preheat-up does not melt the
soldering of this product. Excessive heat may
cause failure to open, short or insulation break
down.
2. Do not touch the body with soldering iron.
The soldering point should be min. 5mm away from
the root of lead wire.
41
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Inrush Current Suppression Lead Type !Caution/Notice
■ Notice (Handling)
1. When this product is operated, temperature of some
area may be about 160 (degree C).
Use proper surrounding parts and material which
withstand such temperature. If they are inadequate
and kept at high temperature for long time, they
may be deteriorated or may produce harmful gas.
And, such harmful gas may deteriorate the element
of this product.
2. This product does not have waterproof construction.
Splashed water may cause failure mode such as
deterioration of characteristics or current leak.
So, do not apply cleaning to immerse it into water
or any solvent.
■ Notice (Others)
1. This product may allow passing higher current than
its initial value when it receives inrush current
again just after the last one until it cools down
and recovers its original resistance enough.
Be sure the highest current under actual condition
on the operating repetition and the operating
temperature.
2. The resin coating of this product does not
guarantee insulating. Keep an adequate insulating
distance to surrounding parts.
8
42
3. The ceramic element of this product is fragile, and
care must be taken not to load an excessive
press-force or not to give a shock at handling.
Such forces may cause cracking or chipping to the
element.
4. Do not apply an excessive force to the lead wire.
Otherwise, it may cause break off junction between
lead wire and element, or may crack element.
So, fix lead wire of element side when lead wire
is bent or cut.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Inrush Current Suppression Lead Type Package
■ Minimum Quantity
Part Numbers
Minimum Quantity (pcs.)
Bulk
Ammo Pack Taping
NTPA7
500
1000
NTPA9
300
1000
NTPAA
300
750
NTPAD
150
400
NTPAJ
100
-
NTPAN
50
-
■ Taping Dimensions (NTPAD/NTPAA_D6A0 Series)
∆S
P
P2
∆h1
D
∆h2
e
H2
T
F
d
t1
t2
l
0
Item
øD
P0
W
W0
L
W1
H0
P1
W2
A
Code
Dimensions (mm)
Pitch of Component
P
30.0
Pitch of Sprocket Hole
P0
15.0±0.3
Lead Spacing
F
7.5±0.5
Length from Hole Center to Component Center
P2
7.5±1.5
Length from Hole Center to Lead
P1
3.75±1.0
Body Diameter
D
(refer to the table below)
Body Thickness
T
(refer to the table below)
Deviation Along Tape, Left or Right
∆S
±2.0
Carrier Tape Width
W
18.0±0.5
Position of Sprocket Hole
W1
9.0±0.5
Lead Distance between Reference and Bottom Plane
H0
16.0±0.5
Height of Component
H2
10.0 max.
I
W0.5 to Y6.0
Protrusion Length
Diameter of Sprocket Hole
D0
4.0±0.1
Lead Diameter
d
0.8±0.05
Total Tape Thickness
t1
0.6±0.3
Total Thickness, Tape and Lead Wire
t2
2.0 max.
∆h1, ∆h2
2.0 max.
Deviation Across Tape
L
Portion to Cut in Case of Defect
Hold Down Tape Width
W0
11.5 min.
Hold Down Tape Position
W2
4.0 max.
e
to line A
Coating Extension on Lead
D (mm)
T (mm)
NTPAD
Type
16.0 max.
5.5 max.
NTPAA
12.0 max.
5.0 max.
8
11.0+0
–2.0
Continued on the following page.
43
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
R44E.pdf
10.2.22
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Inrush Current Suppression Lead Type Package
Continued from the preceding page.
■ Taping Dimensions (NTPA9/NTPA7_B1A0 Series)
P
P2
∆S
∆h1
∆h2
D
e
H2
T
d
W2
Item
t2
t1
Dimensions (mm)
P
12.7
Pitch of Sprocket Hole
P0
12.7±0.3
Lead Spacing
F
5.0+0.8
–0.3
Length from Hole Center to Component Center
P2
6.35±1.3
Length from Hole Center to Lead
P1
3.85±0.8
Body Diameter
D
(refer to the table below)
Body Thickness
T
5.0 max.
∆S
±1.5
Carrier Tape Width
W
18.0±0.5
Position of Sprocket Hole
W1
9.0+0.5
–0.75
Lead Distance between Reference and Bottom Planes
H0
16.0±1.0
Height of Component
H2
6.0 max.
I
W0.5 to Y4.0
D0
4.0±0.3
Lead Diameter
d
0.6±0.05
Total Tape Thickness
t1
0.6±0.3
Total Thickness, Tape and Lead Wire
t2
2.0 max.
Protrusion Length
Diameter of Sprocket Hole
∆h1, ∆h2
Deviation Across Tape
Portion to Cut in Case of Defect
L
1.5 max.
11.0+0
–2.0
Hold Down Tape Width
W0
11.0 min.
Hold Down Tape Position
W2
4.0 max.
e
to line A
Coating Extension on Lead
Type
44
Code
Pitch of Component
Deviation Along Tape, Left or Right
8
0
P0
W
W0
L
W1
H0
F
øD
P1
l
A
D (mm)
NTPA9
11.0 max.
NTPA7
9.0 max.
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
R44E.pdf
10.2.22