14-DIP-300 Tube Packing Data 1414-DIPDIP-300 Packing Configuration: Figure 1.0 Packaging Description: 14-DIP-300 parts are shipped in tube. The tube is made of PVC plastic treated with anti-static agent.These tubes in standard option are placed inside a dissipative plastic bubble sheet, barcode labeled, and placed inside a box made of recyclable corrugated paper. One box contains sixty tubes maximum (see fig. 1.0). And one or several of these boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts shipped. The units in this option are placed inside a small box laid with anti-static bubble sheet. These smaller boxes are individually labeled and placed inside a larger box. These larger boxes then will be placed finally inside a labeled shipping box which still comes in different sizes depending on the number of units shipped. 25 units per Tube Bubble Sheet 60 Tubes per box 1414-DIPDIP-300 Packaging Configuration: Figure 2.0 FKS Label 1414-DIP DIP-300 Packaging Information 517mm x 140mm x 63mm Inner box (1,500cap) Standard (no flow code) Rail/Tube Packaging Option Packaging type Qty per Tube/Inner Box 25 Inner Box Dimension (mm) 517x140x63 Max qty per Box 1,500 Outer Box Dimension (mm) 554x308x223 Max qty per Box 9,000 Weight per unit (gm) 0.9543 Note/Comments Inner Box Barcode Label Sample MBB : NOR P/U : 660 S/T : LOGO I/B: L OGO HIC : 0 P/T:O MIX: X DVC: P ETC: Outer Box Barcode Label Sample 00 / 03 / 17 06:30 00 / 03 / 17 07:30 DVC: LOT: Q’TY: KA7812KA7812-AE LOT: TKLEE777 Q’TY: 1000 W/W: 0103 OPTION: 20000025 01 KA7812KA7812-AE IMSYS777 12000 A710103105 IM 88706892 01 7103 554mm x 308mm x 223mm Outer box(9,000cap) 1414-DIP DIP-300 Tube Configuration: Figure 3.0 FKS Label Note: All dimensions are in mm Ø3.0 ± 0.1 F S937 3080A F S937 3080A F S937 F S937 3080A 3080A F S937 3080A 0.5 +0.2/-0 12.9 ±0.15 F S937 3080A 9.0 ± 0.2 4.5 ± 0.2 4.6±0.2 500.0 ± 1.0 ©2001 Fairchild Semiconductor Corporation 11.1 ± 0.2 October 2001, Rev. A