VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES • • • • • • • • AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Four dielectric materials AgPd termination available for silver epoxy bonding High operating temperature Wet build process Reliable Noble Metal Electrode (NME) system Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 For more than 20 years Vishay Vitramon has supported the automotive industry with robust, highly reliable MLCCs that have made it a leader in this segment. All Vishay Vitramon MLCCs are manufactured in “Precious Metal Technology” (PMT/NME) with a wet build process. They are qualified according to AEC-Q200 with PPAP available on request. Applications for these devices include automotive “under the hood”, safety and comfort electronics. Their termination finish is 100 % tin plate matte and AgPd which is used with silver epoxy bonding. A Polymer (flexible) termination with 100 % tin plate matte finish is offered for intensive boardflex requirements. C0G (NP0) DIELECTRIC X5R, X7R, X8R DIELECTRIC GENERAL SPECIFICATION GENERAL SPECIFICATION Note Electrical characteristics at + 25 °C unless otherwise specified Note Electrical characteristics at + 25 °C unless otherwise specified Operating Temperature: - 55 °C to + 150 °C (above + 125 °C changed characteristics 2.3) Operating Temperature: - 55 °C to + 150 °C (X5R above + 85 °C changed characteristics 2.3) (X7R above + 125 °C changed characteristics 2.3) Capacitance Range: 1 pF to 22 nF Capacitance Range: 120 pF to 1.0 μF Voltage Range: 25 VDC to 3000 VDC Voltage Range: 10 VDC to 1000 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C Dissipation Factor (DF): 0.1 % maximum at 1.0 VRMS and 1 MHz for values 1000 pF 0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF Insulating Resistance: At + 25 °C 100 000 M min. or 1000 F whichever is less At + 125 °C 10 000 M min. or 100 F whichever is less Aging: 0 % maximum per decade Dielectric Strength Test: Performed per method 103 of EIA 198-2-E. Applied test voltages 250 VDC-rated: 250 % of rated voltage 200 % of rated voltage 500 VDC-rated: 630 VDC, 1000 VDC-rated: 150 % of rated voltage 3000 VDC-rated: 120 % of rated voltage Revision: 04-May-12 Temperature Coefficient of Capacitance (TCC): X5R: ± 15 % from - 55 °C to + 85 °C, with 0 VDC applied (5) X7R: ± 15 % from - 55 °C to + 125 °C, with 0 VDC applied X8R: ± 15 % from - 55 °C to + 150 °C, with 0 VDC applied Dissipation Factor (DF): 10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz 16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz > 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz Insulating Resistance: At + 25 °C 100 000 M min. or 1000 F whichever is less At + 125 °C 10 000 M min. or 100 F whichever is less Aging Rate: 1 % maximum per decade Dielectric Strength Test: Performed per method 103 of EIA 198-2-E. Applied test voltages 250 VDC-rated: 250 % of rated voltage min. 150 % of rated voltage 500 VDC-rated: 630 VDC, 1000 VDC-rated: 150 % of rated voltage Document Number: 45040 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CASE CODE MAXIMUM VOLTAGE (V) CAPACITANCE MINIMUM MAXIMUM 0402 100 1.0 pF 220 pF 0603 200 1.0 pF 1.0 nF 0805 500 1.0 pF 3.9 nF 1206 630 1.0 pF 10 nF 1210 630 100 pF 22 nF 1812 3000 12 pF 22 nF 0805 10 560 nF 1.0 μF 0402 100 120 pF 47 nF 0603 200 330 pF 150 nF 0805 500 330 pF 470 nF 1206 630 220 pF 1.0 μF 1210 630 390 pF 1.0 μF 1812 630 10 nF 1.0 μF 0603 50 470 pF 33 nF 0805 50 470 pF 100 nF 1206 50 10 nF 220 nF 1210 50 10 nF 390 nF C0G (NP0) X5R X7R X8R Note • Detail ratings see selection chart Revision: 04-May-12 Document Number: 45040 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon ORDERING INFORMATION - TIN TERMINATION VJ0805 (2) CASE CODE 0402 0603 0805 1206 1210 1812 Y 102 DIELECTRIC CAPACITANCE NOMINAL CODE A = C0G (NP0) Y = X7R G = X5R (5) H = X8R K CAPACITANCE TOLERANCE X A TERMINATION DC VOLTAGE RATING (1) X = Ni barrier B = ± 0.10 pF Expressed in 100 % tin plate C = ± 0.25 pF picofarads (pF). matte finish D = ± 0.5 pF The first two B = Polymer F=±1% digits are 100 % tin plate G=±2% significant, the matte finish (3) J=±5% third is a K = ± 10 % multiplier. An M = ± 20 % “R” indicates a Note: decimal point. C0G (NP0): Examples B, C, D < 10 pF 4R7 = 4.7 pF 102 = 1000 pF F, G, J, K 10 pF X5R/X7R/X8R: J, K, M Q = 10 V J = 16 V X = 25 V A = 50 V B = 100 V C = 200 V P = 250 V T = 400V (4) E = 500 V L = 630 V G = 1000 V H = 3000 V A C 31 MARKING PACKAGING PROCESS CODE A = Unmarked B = Marked Note: Marking is only available for 0805 and 1206 vendor ID and date code 31 = Automotive 100 % tin plate matte finish E/T = 7" reel/plastic tape (6) C = 7" reel/paper tape M/R = 11 1/4"/13" reel/plastic tape (6) P = 11 1/4"/13" reel/paper tape ORDERING INFORMATION - SILVER PALLADIUM TERMINATION VJ0805 (2) CASE CODE 0402 0603 0805 1206 1210 1812 Y 102 DIELECTRIC CAPACITANCE NOMINAL CODE A = C0G (NP0) Y = X7R G = X5R (5) H = X8R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An “R” indicates a decimal point. Examples 102 = 1000 pF K CAPACITANCE TOLERANCE B = ± 0.10 pF C = ± 0.25 pF D = ± 0.5 pF F=±1% G=±2% J=±5% K = ± 10 % M = ± 20 % Note: C0G(NP0): B, C, D < 10 pF F, G, J, K 10 pF X5R/X7R/X8R: J, K, M F A TERMINATION DC VOLTAGE RATING (1) F, E = AgPd (7) Q = 10 V J = 16 V X = 25 V A = 50 V B = 100 V C = 200 V P = 250 V T = 400V (4) E = 500 V L = 630 V G = 1000 V H = 3000 V A O 34 MARKING PACKAGING PROCESS CODE A = Unmarked Note: Marking is not available 34 = Automotive AgPd finish E/T = 7" reel/plastic tape (6) O = 7" reel/flamed paper tape M/R = 11 1/4"/13" reel/plastic tape (6) I = 11 1/4"/13" reel/flamed paper tape Note: “I” and “O” are used for “F”, “E” termination size 0402/0603/0805 Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: [email protected] (2) Case size designator may be replaced by a four digit drawing number (3) Polymer termination contact [email protected] for availability of ratings (4) Per customer request. Contact: [email protected] for availability (5) Selected values for X5R, see dielectric selection chart (6) Packaging “T” and “R” is used for 1812 size (7) Termination code “E” is for conductive epoxy assembly. Revision: 04-May-12 Document Number: 45040 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon DIMENSIONS in inches (millimeters) W L T MAX. P CASE CODE STYLE LENGTH (L) WIDTH (W) TERMINATIONS PAD (P) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 0402 VJ0402 0.040 + 0.004/- 0.002 (1.00 + 0.10/- 0.05) 0.020 + 0.004/- 0.002 (0.50 + 0.10/- 0.05) 0.024 (0.60) 0.004 (0.10) 0.016 (0.41) 0603 VJ0603 0.063 ± 0.005 (1.60 ± 0.12) 0.031 ± 0.005 (0.80 ± 0.12) 0.038 (0.97) 0.012 (0.30) 0.018 (0.46) 0805 VJ0805 0.079 ± 0.008 (2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.057 (1.45) 0.010 (0.25) 0.028 (0.71) 1206 VJ1206 0.126 ± 0.010 (3.20 ± 0.25) 0.063 ± 0.010 (1.60 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.028 (0.71) 1210 VJ1210 0.126 ± 0.010 (3.20 ± 0.25) 0.098 ± 0.010 (2.50 ± 0.25) 0.076 (1.94) 0.010 (0.25) 0.028 (0.71) 1812 VJ1812 0.177 ± 0.010 (4.50 ± 0.25) 0.126 ± 0.010 (3.20 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) Note • Polymer (B-termination) have increased dimensions: Length 0.006" (0.15 mm) Revision: 04-May-12 Document Number: 45040 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ0402 VJ0603 CASE CODE 0402 0603 25/50 100 50 100 200 50 VOLTAGE (VDC) VOLTAGE CODE X/A B A B C A CAP. CODE CAP. 1R0 1.0 pF •• •• •• •• •• •• 1R2 1.2 pF •• •• •• •• •• •• 1R5 1.5 pF •• •• •• •• •• •• 1R8 1.8 pF •• •• •• •• •• •• 2R2 2.2 pF •• •• •• •• •• •• 2R7 2.7 pF •• •• •• •• •• •• 3R3 3.3 pF •• •• •• •• •• •• 3R9 3.9 pF •• •• •• •• •• •• 4R7 4.7 pF •• •• •• •• •• •• 5R6 5.6 pF •• •• •• •• •• •• 6R8 6.8 pF •• •• •• •• •• •• 8R2 8.2 pF •• •• •• •• •• •• 100 10 pF •• •• •• •• •• •• 120 12 pF •• •• •• •• •• •• 150 15 pF •• •• •• •• •• •• 180 18 pF •• •• •• •• •• •• 220 22 pF ++ ++ •• •• •• •• 270 27 pF ++ ++ •• •• •• •• 330 33 pF ++ ++ •• •• •• •• 390 39 pF ++ ++ •• •• •• •• 470 47 pF ++ ++ •• •• •• •• 560 56 pF ++ ++ ++ ++ ++ •• 680 68 pF ++ ++ ++ ++ ++ •• 820 82 pF ++ ++ ++ ++ ++ •• 101 100 pF ++ ++ ++ ++ ++ ++ 121 120 pF ++ ++ ++ ++ ++ ++ 151 150 pF ++ ++ ++ ++ ++ 181 180 pF ++ ++ ++ + ++ 221 220 pF ++ ++ ++ + ++ 271 270 pF ++ ++ + ++ 331 330 pF ++ ++ ++ 391 390 pF ++ ++ ++ 471 470 pF ++ ++ ++ 561 560 pF ++ ++ 681 680 pF ++ ++ 821 820 pF ++ ++ 102 1.0 nF ++ ++ 122 1.2 nF ++ 152 1.5 nF ++ 182 1.8 nF + 222 2.2 nF + 242 2.4 nF 272 2.7 nF + 332 3.3 nF + 392 3.9 nF + 472 4.7 nF 562 5.6 nF 682 6.8 nF 822 8.2 nF 103 10 nF 123 12 nF 153 15 nF 183 18 nF 223 22 nF 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF Notes •• Paper tape, • Plastic tape, ++ Paper tape, + Plastic tape, see table “Product drawings (in use)” (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 Revision: 04-May-12 VJ0805 0805 100 B 200 C 500 E •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ + + + •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• ++ ++ ++ ++ ++ ++ ++ ++ + + + + + •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• ++ ++ ++ ++ + + + + + Document Number: 45040 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ1206 (1) VJ1210 (1) CASE CODE 1206 (1) 1210 (1) VOLTAGE (VDC) 50 100 200 250 500/630 50 100 200 500/630 VOLTAGE CODE A B C P E/L A B C E/L CAP. CODE CAP. 1R0 1.0 pF •• •• •• •• 1R2 1.2 pF •• •• •• •• 1R5 1.5 pF •• •• •• •• 1R8 1.8 pF •• •• •• •• 2R2 2.2 pF •• •• •• •• 2R7 2.7 pF •• •• •• •• 3R3 3.3 pF •• •• •• •• 3R9 3.9 pF •• •• •• •• 4R7 4.7 pF •• •• •• •• 5R6 5.6 pF •• •• •• •• 6R8 6.8 pF •• •• •• •• 8R2 8.2 pF •• •• •• •• 100 10 pF •• •• •• •• 120 12 pF •• •• •• •• 150 15 pF •• •• •• •• 180 18 pF •• •• •• •• 220 22 pF •• •• •• •• 270 27 pF •• •• •• •• 330 33 pF •• •• •• •• 390 39 pF •• •• •• •• 470 47 pF •• •• •• •• 560 56 pF •• •• •• •• 680 68 pF •• •• •• •• 820 82 pF •• •• •• •• 101 100 pF + + + + + + + + 121 120 pF + + + + + + + + 151 150 pF + + + + + + + + 181 180 pF + + + + + + + + 221 220 pF + + + + + + + + 271 270 pF + + + + + + + + 331 330 pF + + + + + + + + 391 390 pF + + + + + + + + 471 470 pF + + + + + + + + 561 560 pF + + + + + + + + 681 680 pF + + + + + + + + 821 820 pF + + + + + + + + 102 1.0 nF + + + + + + + + 122 1.2 nF + + + + + + + 152 1.5 nF + + + + + + + 182 1.8 nF + + + + + + + 222 2.2 nF + + + + + + + 242 2.4 nF + 272 2.7 nF + + + + + + 332 3.3 nF + + + + + + 392 3.9 nF + + + + + 472 4.7 nF + + + + + 562 5.6 nF + + + + + 682 6.8 nF + + + + + 822 8.2 nF + + + + + 103 10 nF + + + + 123 12 nF + + 153 15 nF + + 183 18 nF + + 223 22 nF + 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF Notes •• Paper tape, • Plastic tape, ++ Paper tape, + Plastic tape, see table “Product drawings (in use)” (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 Revision: 04-May-12 50 A 100 B VJ1812 (1) 1812 (1) 200 500/630 C E/L • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1000 3000 G H • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45040 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R/X5R (2) STYLE VJ0402 VJ0603 CASE CODE 0402 0603 VOLTAGE (VDC) 16 25 50 100 16 25 50 100 200 10 16 VOLTAGE CODE J X A B J X A B C Q J CAP. CODE CAP. 121 120 pF •• •• •• •• 151 150 pF •• •• •• •• 181 180 pF •• •• •• •• 221 220 pF •• •• •• •• 271 270 pF •• •• •• •• 331 330 pF •• •• •• •• •• •• •• •• 391 390 pF •• •• •• •• •• •• •• •• •• •• 471 470 pF •• •• •• •• •• •• •• •• •• •• 561 560 pF •• •• •• •• •• •• •• •• •• •• 681 680 pF •• •• •• •• •• •• •• •• •• •• 821 820 pF •• •• •• •• •• •• •• •• •• •• 102 1.0 nF •• •• •• •• •• •• •• •• •• •• 122 1.2 nF •• •• •• •• •• •• •• •• •• •• 152 1.5 nF •• •• •• •• •• •• •• •• •• •• 182 1.8 nF •• •• •• •• •• •• •• •• •• •• 222 2.2 nF •• •• •• •• •• •• •• •• •• •• 272 2.7 nF •• •• •• ++ •• •• •• •• •• •• 332 3.3 nF •• •• •• ++ •• •• •• •• •• •• 392 3.9 nF •• •• •• ++ •• •• •• •• •• •• 472 4.7 nF •• •• •• ++ •• •• •• •• •• •• 562 5.6 nF •• •• ++ •• •• •• •• •• 682 6.8 nF •• •• ++ •• •• •• •• •• 822 8.2 nF •• •• ++ •• •• •• •• •• 103 10 nF ++ ++ ++ •• •• •• •• •• 123 12 nF ++ ++ •• •• •• ++ •• 153 15 nF ++ ++ •• •• •• ++ •• 183 18 nF ++ ++ •• •• •• ++ •• 223 22 nF ++ •• •• •• ++ •• 273 27 nF ++ •• •• •• ++ •• 333 33 nF ++ •• •• ++ ++ •• 393 39 nF ++ •• •• ++ ++ •• 473 47 nF ++ •• •• ++ •• 563 56 nF •• ++ ++ •• 683 68 nF •• ++ ++ + 823 82 nF •• ++ ++ + 104 100 nF ++ ++ ++ + 124 120 nF + + 154 150 nF + + 184 180 nF + 224 220 nF + 274 270 nF + 334 330 nF + 394 390 nF + 474 470 nF + 564 560 nF + X5R 684 680 nF + X5R 824 820 nF + X5R 105 1.0 μF + X5R 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Notes •• Paper tape, • Plastic tape, ++ Paper tape, + Plastic tape, see table “Product drawings (in use)” (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 (2) X5R (- 55 °C to + 85 °C TCC: ± 15 %) for all 0805/10 V ratings Revision: 04-May-12 25 X •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• + + + + + + + + + VJ0805 (2) 0805 50 100 A B •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• + + + + + •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • + + + + 200 C •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • 250 P 500 E • •• Document Number: 45040 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC STYLE VJ1206 CASE CODE (1) 1206 X7R VJ1210 (1) 1210 16 25 50 100 200 500/630 16 25 50 100 200 500/630 VOLTAGE (VDC) VOLTAGE CODE J X A B C E/L J X A B C E/L CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF • 271 270 pF • 331 330 pF • 391 390 pF • • 471 470 pF • • 561 560 pF • • 681 680 pF • • 821 820 pF • • • • • 102 1.0 nF • • • • • • • 122 1.2 nF • • • • • • • 152 1.5 nF • • • • • • • 182 1.8 nF • • • • • • • 222 2.2 nF • • • • • • • • 272 2.7 nF • • • • • • • • 332 3.3 nF • • • • • • • • 392 3.9 nF • • • • • • • • 472 4.7 nF • • • • • • • • 562 5.6 nF • • • • • • • • 682 6.8 nF • • • • • • • • 822 8.2 nF • • • • • • • • 103 10 nF • • • • • • • • • • • • 123 12 nF • • • • • • • • • • • • 153 15 nF • • • • • • • • • • • • 183 18 nF • • • • • + • • • • • • 223 22 nF • • • • • • • • • • + 273 27 nF • • • • • • • • • • + 333 33 nF • • • • • • • • • • + 393 39 nF • • • • • • • • • • + 473 47 nF • • • • • • • • • • 563 56 nF • • • • • • • • • • 683 68 nF • • • • • • • • • • 823 82 nF • • • • + • • • • • 104 100 nF • • • + + • • • + + 124 120 nF • • • + + • • • + + 154 150 nF • • + + • • • + + 184 180 nF • • + + • • • + + 224 220 nF + + + + + + + + 274 270 nF + + + + + + + + 334 330 nF + + + + + + + 394 390 nF + + + + + + + 474 470 nF + + + + + + + 564 560 nF + + + + + 684 680 nF + + + + + 824 820 nF + + + + + 105 1.0 μF + + + + + 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Notes •• Paper tape, • Plastic tape, ++ Paper tape, + Plastic tape, see table “Product drawings (in use)” (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 Revision: 04-May-12 VJ1812 (1) (1) 1812 (1) 50 A • • • • • • • • • • • • • • • • • • • • • 100 B • • • • • • • • • • • • • • • • • • • • 200 C 500 E 630 L • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45040 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC STYLE VJ0603 VJ0805 VJ1206 CASE CODE 0603 0805 1206 VOLTAGE (VDC) (2) VOLTAGE CODE CAP. CODE 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 X8R 25 X CAP. 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1.0 nF 1.2 nF 1.5 nF 1.8 nF 2.2 nF 2.7 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF 12 nF 15 nF 18 nF 22 nF 27 nF 33 nF 39 nF 47 nF 56 nF 68 nF 82 nF 100 nF 120 nF 150 nF 180 nF 220 nF 270 nF 330 nF 390 nF 470 nF 560 nF 680 nF 820 nF 1.0 μF 1.2 μF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 50 A 25 X 50 A •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • VJ1210 (1) 1210 (1) 25 X 50 A • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 25 X 50 A • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Notes •• Paper tape, • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 (2) For other voltage ratings, please contact [email protected] Revision: 04-May-12 Document Number: 45040 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon PRODUCT DRAWING (in use) CASE CODE X - TERMINATION CODE (100 % MATTE TIN) CODE F - TERMINATION CODE (AgPd) DRAWING C0G (NP0) DRAWING X7R DRAWING C0G (NP0) DRAWING X7R •• = Paper tape 7175 9172 7175 9072 ++ = Paper tape 7172 7172 7072 7072 •• = Paper tape 7179 9155 7179 9097 ++ = Paper tape 7155 7155 7097 7097 • = Plastic tape - - 7179 9097 + = Plastic tape 7155 7155 7097 7097 •• = Paper tape 7188 9156 7188 9080 ++ = Paper tape 7156 7156 7080 7080 • = Plastic tape - 9156 7188 9080 + = Plastic tape 7156 7156 7080 7080 •• = Paper tape 7180 - - - • = Plastic tape - 9157 7180 9081 + = Plastic tape 7157 7157 7081 7081 • = Plastic tape - 9158 - 9099 + = Plastic tape 7158 7158 7099 7099 0402 0603 0805 1206 1210 STANDARD PACKAGING QUANTITIES (1)(2) 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES TAPE SIZE PAPER TAPE PACKAGING CODE “C”/“O” (4) PLASTIC TAPE PACKAGING CODE “E/T” (6) PAPER TAPE PACKAGING CODE “P”/“I” (4) PLASTIC TAPE PACKAGING CODE “M/R” (6) 0402 8 mm 5000/10 000 (3) n/a 10 000/30 000 (3) n/a 0603 8 mm 4000 n/a 10 000 n/a 0805 (5) 8 mm 3000 3000 10 000 10 000 1206 (5) 8 mm 3000 3000 10 000 10 000 1210 (5) 8 mm n/a 2000/2500/3000 n/a 9000/10 000 1812 12 mm n/a 1000 n/a 4000 CASE CODE Notes (1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (2) n/a = Not available (3) Quantity can vary with customer request (4) Flamed paper tape code “O” (7" reel) and “I” (11 1/4/13" reel) for AgPd terminated parts (termination code F, E) (5) Packaging “C/P” or “E/M” and quantity can depend from product thickness (6) Packaging code “T”, “R” are used for size 1812. Revision: 04-May-12 Document Number: 45040 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon 1 - GENERAL CERTIFICATES # Quality management system acc. to ISO/TS 16949: 2009 Yes # Quality management system acc. to ISO 9001: 2008 Yes # Environmental certification acc. to ISO 14001: 2004 Yes # Health and safety system acc. to OHSA 18001 Yes 2 - TECHNICAL REQUIREMENTS Unless specified in component specification, these parameters are the minimum requirements for the components. 2.1 OPERATING TEMPERATURE RANGE For standard applications TA: - 55 °C to + 125 °C see characteristics 2.3 For high temperature applications TA: - 55 °C to + 150 °C see characteristics 2.3 For ultra high temperature applications TA: - 55 °C to + 175 °C see characteristics 2.3 2.2 STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to + 40 °C ambient temperature and 70 % related humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a.Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. 2.3 CHARACTERISTICS PARAMETER Rated voltage in temperature range - 55 °C to + 85 °C Rated voltage in temperature range - 55 °C to + 125 °C Rated voltage in temperature range - 55 °C to + 150 °C Derating at higher temperature up to + 150 °C Derating at higher temperature up to + 175 °C Temperature coefficient in temperature range - 55 °C to + 125 °C Temperature coefficient in temperature range - 55 °C to + 150 °C CERAMIC TYPE SYMBOL X5R UR C0G (NP0) X7R UR 16 V to 630 V 25 V/50 V C0G (NP0), 25 V to 100 V UDC 1/2 UR X7R 16 V to 100 V UDC 1/2 UR C0G (NP0), 25 V to 100 V UDC 1/4 UR X7R 16 V to 100 V UDC 1/4 UR X8R 25 V/50 V UDC 1/4 UR if CR < 10 pF: C ± 120 ppm/K C0G (NP0) C ± 30 ppm/C X7R C ± 15 % C0G (NP0) C ± 30 ppm/C C + 15 %/- 30 % C 15 %/- 50 % X7R X7R X7R X8R Revision: 04-May-12 10 V 25 V to 3000 V if CR < 10 pF: C ± 120 ppm/K ± 15 % 0.0015 C0G (NP0) Dissipation factor in temperature range - 55 °C to + 175 °C TEST CONDITIONS/ REMARKS X8R X8R Temperature coefficient in temperature range - 55 °C to + 175 °C RATINGS tan 0.06 0.06 Document Number: 45040 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS INSULATION RESISTANCE VS. TEMPERATURE TEMPERATURE DEPENDENCE OF CAPACITANCE 10 000 0.4 0.2 0.0 - 0.2 - 0.4 1000 (ΩF) INSULATION RESISTANCE % CAPACITANCE CHANGE 0.6 100 - 0.6 10 - 50 0 100 50 10 150 25 TEMPERATURE IN °C 0.2 % CAPACITANCE CHANGE % CAPACITANCE CHANGE 150 VOLTAGE COEFFICIENT OF CAPACITANCE AGING RATE 0.2 0.1 0.0 - 0.1 0.1 0.0 - 0.1 - 0.2 - 0.2 1 10 100 1000 10 000 0 10 HOURS 20 30 40 50 60 70 80 90 100 DC VOLTS APPLIED CHANGE OF CAPACITANCE WITH FREQUENCY CHANGE OF DISSIPATION FACTOR WITH FREQUENCY +2 0.001 DISSIPATION FACTOR % CAPACITANCE CHANGE 100 50 TEMPERATURE °C +1 0 0.0005 -1 0.00025 -2 1 kHz 10 kHz 100 kHz FREQUENCY Revision: 04-May-12 1 MHz 1 kHz 10 kHz 100 kHz 1 MHz FREQUENCY Document Number: 45040 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS MINIMUM INSULATION RESISTANCE VS. TEMPERATURE TEMPERATURE COEFFICIENT OF CAPACITANCE 10 000 INSULATION RESISTANCE IN ΩF % CAPACITANCE CHANGE 15 10 5 X5R 0 X7R -5 - 10 - 15 - 20 - 25 - 30 - 75 - 50 - 25 0 20 50 75 1000 100 10 100 125 150 175 20 40 60 TEMPERATURE °C DISSIPATION FACTOR VS. TEMPERATURE 100 120 140 160 180 AGING RATE 6.0 1.0 % CAPACITANCE CHANGE 5.5 % DISSIPATION FACTOR 80 TEMPERATURE IN °C 5.0 4.5 4.0 3.5 3.0 X7R 2.5 2.0 1.5 1.0 0.5 0.0 0.0 - 1.0 - 2.0 - 3.0 - 4.0 - 75 - 50 - 25 0 25 50 7 5 100 125 150 175 1 10 100 TEMPERATURE °C 1000 10 000 HOURS VOLTAGE VS. TEMPERATURE VOLTAGE COEFFICIENT OF CAPACITANCE 5 150 X7R 100 50 % CAPACITANE CHANGE % VOLTAGE 200 0 -5 - 10 100 V RATED 25 V RATED - 15 50 V RATED - 20 - 25 - 30 0 - 75 - 50 - 25 0 20 50 75 100 125 150 175 180 TEMPERATURE °C Revision: 04-May-12 0 10 20 30 40 50 60 70 80 90 100 DC VOLTS APPLIED Document Number: 45040 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS DISSIPATION FACTOR VS. VOLTAGE DISSIPATION FACTOR DISSIPATION FACTOR 0.016 0.012 50 V 100 V 0.008 DISSIPATION FACTOR VS. VOLTAGE 0.020 0.020 0.016 0.012 0.008 200 V 0 10 20 30 40 50 60 70 DC VOLTS APPLIED 80 0 90 100 UN/V- 100 200 300 400 500 600 DC VOLTS APPLIED CHANGE OF CAPACITANCE WITH FREQUENCY CHANGE OF DISSIPATION FACTOR WITH FREQUENCY 0 20 % DISSIPATION FACTOR % CAPACITANCE CHANGE 500/630 V 0.000 0.004 - 10 - 20 15 10 5 0 1 kHz 10 kHz 100 kHz FREQUENCY Revision: 04-May-12 1 MHz 1 kHz 10 kHz 100 kHz 1 MHz FREQUENCY Document Number: 45040 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon X8R DIELECTRIC - TYPICAL PARAMETERS % CAPACITANCE CHANGE 10 5 0 -5 - 10 - 15 - 20 - 75 - 50 - 25 0 25 50 MINIMUM INSULATION RESISTANCE VS. TEMPERATURE INSULATION RESISTANCE (ΩF) TEMPERATURE COEFFICIENT OF CAPACITANCE 15 10 000 1000 100 10 10 75 100 125 150 175 25 150 AGING RATE DISSIPATION FACTOR VS. TEMPERATURE 1.0 4.5 4.0 3.5 3.0 2.5 X8R 2.0 1.5 1.0 0.5 % CAPACITANCE CHANGE 5.0 % DISSIPATION FACTOR 100 TEMPERATURE °C TEMPERATURE °C 0.0 - 1.0 - 2.0 - 3.0 - 4.0 0.0 - 75 - 50 - 25 0 25 50 75 100 125 150 175 TEMPERATURE °C Revision: 04-May-12 1 10 100 HOURS 1000 10 000 Document Number: 45040 15 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon 3 - LOT ACCEPTANCE TESTS Process tests available in classes (on request) GROUP ACTION A Components are tested within the monitoring program of the supplier. The supplier shall submit the part numbers of the selected component to the customer during the component specification discussions. B Components (customer P/N) shall be tested quarterly. Records available only on special request by the customer. C Test with each shipment. Records are provided on a monthly basis. Customer special requirement; requirement should be determined in a specific component specification. Upon request the records can be submitted in electronic format on monthly basis. 3.1 THERMAL STRENGTH, THERMAL SHOCK SENSIBILITY Sample size 200 Handling Mounted on PCB Thermal shock 1 x 280 °C, no pre-heat, 5 s to 10 s IR - test (IRATS) U = UR, T = room temperature, verified Burn in (BIATS) Equivalent to 12 h burn-in, 2 x UR/125 °C, verification time to failure Acceptance criteria: Zero defects (IRATS and BIATS). 3.2 BOARD FLEX TEST Sample size 20 pcs/lot X5R, X7R, X8R Every lot C0G At least three different part numbers of one component family matrix per quarter Max. deflection 8 mm (data to be reported, available on request) 3.3 SOLDERABILITY/RESISTANCE TO SOLDERING HEAT Temperature profile for reflow soldering of SMD parts IPC/JEDEC-J-STD-020C. Test is done on a regular basis for samples taken randomly out of the line. Acceptance criteria: At least 95 % new solder and no detachment or leaching of terminations. Solderability is guaranteed at least for one year when stored in original package. 4 - ENVIRONMENTAL REQUIREMENTS A list of the chemical substances content, which must not be used or whose use shall be limited by international law, is available on request. Vishay confirms that the components specified in this specification do not contain asbestos nor cadmium, not even in the smallest volumes. The manufacturer/supplier confirms that the component during normal handling, storage and assembly, as well as during operation in the automobile, is non toxic. Revision: 04-May-12 Document Number: 45040 16 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon 5 - INSPECTION CRITERIA The supplier shall carry out visual examination with suitable equipment with approximately 10 x magnification and lighting appropriate to the specimen under test and the required quality level. Chipping The components shall be free of cracks or fissures. Small damages which do not deteriorate the performance of the component shall be less than 50 % of the surface of the MLCC as defined in EIA 595. Delamination or Exposed Electrodes No visible separation or delamination between layers of the capacitor and no exposed electrodes between the two terminals of the capacitor must be seen. Metallization For the metallization, no visible detachment of the metallized terminals and no exposed electrodes must be seen. Defects and gaps in the metallization on each sides of the terminal must not exceed 10 % of the total area (e.g. A, B, C, …). Leaching shall not exceed 25 %. A B C Electrode Distance The ceramic body shall be free of any conducting material between the terminals which reduces the distance of the electrodes. The minimum distance ‘d’ is 400 μm for all package sizes, except 0603. For the component package ‘0603’ the minimum distance is 200 μm. D Revision: 04-May-12 Document Number: 45040 17 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon 6 - BOARD FLEX TEST CONDITIONS 6.1 BOARD FLEX DEFINITIONS OF TEST PCB thickness = (1.6 ± 0.1) mm Copper thickness = 35 μm Material FR4 (EP-GC 02 according to DIN 40 802) LAYOUT/PAD DESIGN (Dimensions in mm) CASE CODE PAD SIZE LB 1.00 1.30 1.80 2.80 3.60 LL 2.20 3.40 4.50 4.50 4.75 0603 0805 1206 1210 1812 LEL 0.75 1.20 1.20 1.30 1.50 LB Note • LL = total length; LB = width of the pad; LEL = single pad length LEL LL 6.2 SOLDERING INSTRUCTIONS THICKNESS, RECOMMENDED FOR SOLDER PASTE (Reflow soldering) CASE CODE THICKNESS in μm 0402 0603 0805 1206 1210 1812 75 to 90 150 to 200 150 to 200 150 to 200 150 to 200 150 to 200 6.3 TYPICAL TEMPERATURE PROFILE FOR REFLOW SOLDERING (Boardflex test) LEAD (Pb)-FREE SOLDERING PROFILE 300 MIN. 300 s MIN. 255 °C MAX. 260 °C TEMPERATURE (°C) 250 T (SOLID) MIN. 217 °C MIN. 190 °C 200 MIN. 40 s MIN. 90 s 150 100 RAMP DOWN FROM T (SOLID) MAX. 6 K/s RAMP UP TO 150 °C MAX. 3 K/s 50 MIN. 110 s 0 0 Revision: 04-May-12 50 100 150 200 250 300 350 400 TIME (s) Document Number: 45040 18 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon 6.4 MOUNTING, DIMENSIONS AND TESTING Mounting SMD under test Printed board before test 1.6 ± 0.1 + R=3 + 45 ± 2 Support Solder 90 ± 1 Width Testing 20 Material: Aluminum Width = actual width of substrate + 5 mm on both sides Radius 1 to 2 10 ± 0.1 Printed board during test + 1.5 ± 0.1 + 0 All dimensions in mm 6.5 PERFORMANCE OF THE TEST(S) A) Electrical test according to component specification (Cap, DF, IR) B) Mounting to PCB C) Storage at room temperature (min. 10 h) D) Board flex test 6.6 DETAILS X5R, X7R, X8R PCB to be deflected continuously, speed 1 mm/s (± 0.5 mm/s) C0G PCB to be deflected in steps untill cracks or other damages are visible or can be measured. Dwell time between steps: (5 ± 1) s 6.7 FAILURE CRITERIA X5R, X7R, X8R Piezoelectric sensor, no failure up to 2 mm C0G C/C < 1 % or < 1 pF, no failure up to 3 mm Both Electrical test according to component specification Revision: 04-May-12 Document Number: 45040 19 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....31/VJ....34 Automotive MLCC www.vishay.com Vishay Vitramon 7 - AEC-Q200 QUALIFICATION TESTING NO. AEC-Q200 TEST ITEM REFERENCE 1 Pre- and post stress electrical test User spec 3 High temp exposure (storage) MIL-STD-202, method 108 4 Temperature cycling JESD22, method JA-104 5 Destructive physical analysis EIA-469 6 Moisture resistance MIL-STD-202, method 106 7 Biased humidity MIL-STD-202, method 103 8 Operation life MIL-STD-202 method 108 9 External Visual MIL-STD-883 method 2009 10 Physical dimension JESD22, method JB-100 13 Mechanical shock MIL-STD-202, method 213 14 Vibration MIL-STD-202, method 204 15 Resistance to solder heat MIL-STD-202, method 215 16 ESD AEC-Q200 rev. C 17 Solderability J-STD-002 20 Electrical characterization User spec 21 Board flex AEC-Q200-005 22 Terminal strength AEC-Q200-006 23 Beam load AEC-Q200-003 Revision: 04-May-12 Document Number: 45040 20 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000