VISHAY UG2F

New Product
UG2F, UG2G
Vishay General Semiconductor
Ultrafast Plastic Rectifier
FEATURES
• Glass passivated chip junction
• Ultrafast reverse recovery time
• Low switching losses, high efficiency
• High forward surge capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
DO-204AC (DO-15)
TYPICAL APPLICATIONS
For use in high frequency rectification and freewheeling
application in switching mode converters and inverters for
consumer, computer and telecommunication.
PRIMARY CHARACTERISTICS
IF(AV)
2.0 A
VRRM
300 V, 400 V
IFSM
50 A
trr
35 ns
VF at IF = 2.0 A
0.910 V
TJ max.
150 °C
MECHANICAL DATA
Case: DO-204AC (DO-15)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
per
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
UG2F
UG2G
UNIT
Maximum repetitive peak reverse voltage
VRRM
300
400
V
Maximum average forward rectified current
at 0.375" (9.5 mm) lead length (fig. 1)
IF(AV)
2.0
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
50
A
TJ, TSTG
- 55 to + 150
°C
Operating junction and storage temperature range
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 1.0 A
Instantaneous forward voltage
IF = 2.0 A
IF = 1.0 A
IF = 2.0 A
TJ = 25 °C
VF (1)
TJ = 125 °C
TJ = 25 °C
Maximum reverse current
Rated VR
Maximum reverse recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
TJ = 100 °C
Typical reverse recovery time
Typical reverse recovery current
Typical stored charge
Typical junction capacitance
SYMBOL
IR (2)
trr
TYP.
MAX.
0.921
-
1.016
1.10
0.772
-
0.910
1.02
UNIT
V
1.8
10
108
200
23
35
ns
ns
μA
trr
31
-
IF = 1.0 A, dI/dt = 100 A/μs,
VR = 30 V, Irr = 0.1 IRM
IRM
1.7
-
A
Qrr
29
-
nC
4.0 V, 1 MHz
CJ
10
-
pF
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
Document Number: 88995
Revision: 23-Oct-09
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
New Product
UG2F, UG2G
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
UG2F
UG2G
RθJA (1)
45
(1)
14
RθJL
UNIT
°C/W
Note
(1) Thermal resistance junction to lead P.C.B. mounted 0.375" (9.5 mm) lead length
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
UG2G-E3/54
0.404
54
4000
13" diameter paper tape and reel
UG2G-E3/73
0.404
73
2000
Ammo pack packaging
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
60
8.3 ms Single Half Sine-Wave
Resistive or Inductive Load
0.375" (9.5 mm) Lead Length
TL Lead Temperature
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
3.0
2.0
1.0
0
40
30
20
10
0
80
90
100
110
120
130
140
150
1
10
100
Lead Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Maximum Forward Current Derating Curves
Fig. 3 - Maximum Non-Repetitive Peak Forward Surge Current
2.4
D = 0.5
2.0
D = 0.3
D = 1.0
D = 0.2
1.6
D = 0.1
1.2
T
0.8
0.4
D = tp/T
tp
0
0
0.4
0.8
1.2
1.6
2.0
2.4
Instantaneous Forward Current (A)
100
D = 0.8
Average Power Loss (W)
50
TJ = 70 °C
10
TJ = 100 °C
1
TJ = 125 °C
TJ = 25 °C
TJ = 50 °C
0.1
0.01
0.3
0.5
0.7
0.9
1.1
1.3
1.5
1.7
Average Forward Current (A)
Instantaneous Forward Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 4 - Typical Instantaneous Forward Characteristics
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88995
Revision: 23-Oct-09
New Product
UG2F, UG2G
Vishay General Semiconductor
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TJ = 125 °C
100
Junction Capacitance (pF)
Instantaneous Reverse Current (μA)
1000
TJ = 100 °C
TJ = 70 °C
10
TJ = 50 °C
1
TJ = 25 °C
1
0.1
0.1
10
20
30
40
50
60
70
80
90
10
100
1
10
100
Percent of Rated Peak Reverse Voltage (%)
Reverse Voltage (V)
Fig. 5 - Typical Reverse Leakage Characteristics
Fig. 6 - Typical Junction Capacitance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AC (DO-15)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
0.300 (7.6)
0.230 (5.8)
0.140 (3.6)
0.104 (2.6)
DIA.
1.0 (25.4)
MIN.
Document Number: 88995
Revision: 23-Oct-09
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1