TOSHIBA TLP3502A

TLP3502A
TOSHIBA Photocoupler GaAs Ired & Photo−Triac
TLP3502A
Trica Driver
Programmable Controllers
AC−Output Module
Solid State Relay
Unit in mm
The TOSHIBA TLP3502A consists of a photo−triac optically coupled to a
gallium arsenide infrared emitting diode in a 8 lead plastic DIP package.
·
Peak off−state voltage: 400V(min.)
·
Trigger LED current: 10mA(max.)
·
On−state current: 0.6Arms(max.)
·
Isolation voltage: 2500 Vrms(min.)
·
UL recognized: UL1577, file no. E67349
TOSHIBA
·
Trigger LED current
Weight: 0.52g
Classification*
Trigger LED Current (mA)
VT = 6V, Ta = 25°C
Min.
Max.
Marking Of
Classification
(IFT5)
―
5.0
T5
(IFT7)
―
7.0
T5, T7
Standard
―
10
T5, T7, blank
11−10C3
Pin Configuration (top view)
8
*Ex. (IFT5); TLP3502A(IFT5)
(Note) Application type name for certification test, please
use standard product type name, i.e.
TLP3502A (IFT5): TLP3502A
2
6
3
5
2 : Anode
3 : Cathode
5 : Triac gate
6 : Triac T1
8 : Triac T2
1
2002-09-25
TLP3502A
Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
IF
50
mA
∆IF / °C
-0.7
mA / °C
Peak forward current (100µs pulse, 100pps)
IFP
1
A
Reverse voltage
VR
5
V
Junction temperature
Tj
125
°C
VDRM
400
V
Forward current
LED
Forward current derating (Ta ≥ 53°C)
Off-state output terminal voltage
Detector
On-state RMS current
Ta = 40°C
0.6
IT(RMS)
Ta = 60°C
A
0.45
∆IT / °C
-7.5
mA / °C
ISP
2
A
ITSM
5
A
Tj
120
°C
Storage temperature range
Tstg
-40~125
°C
Operating temperature range
Topr
-20~80
°C
Lead soldering temperature (10s)
Tsol
260
°C
BVS
2500
Vrms
On-state current derating (Ta ≥ 40°C)
Peak current from snubber circuit
(100µs pulse, 120pps)
Peak nonrepetitive surge current (50Hz, peak)
Junction temperature
Isolation voltage (AC, 1min., R.H.≤ 60%)
(Note)
(Note) Device considered a two terminal: LED side pins shorted together
and Detector side pins shorted together.
Recommended Operating Conditions
Characteristic
Symbol
Min.
Typ.
Max.
Unit
Supply voltage
VAC
―
―
120
Vac
Forward current
IF
15
20
25
mA
Peak current from snubber
circuit
ISP
―
―
1
A
Operating temperature
Topr
-20
―
80
°C
2
2002-09-25
TLP3502A
Individual Electrical Characteristics (Ta = 25°C)
Detector
LED
Characteristic
Symbol
Test Condition
Min.
Typ.
Max.
Unit
Forward voltage
VF
IF = 10mA
1.0
1.15
1.3
V
Reverse current
IR
VR = 5V
―
―
10
µA
Capacitance
CT
V = 0, f = 1MHz
―
30
―
pF
Peak off-state current
IDRM
VDRM = 400V, Ta = 110°C
―
―
100
µA
Peak on-state voltage
VTM
ITM = 0.75A
―
―
3.0
V
―
―
25
mA
200
500
―
V / µs
―
5
―
V / µs
Min.
Typ.
Max.
Unit
Holding current
IH
―
Critical rate of rise of
off-state voltage
dv / dt
Critical rate of rise of
commutating voltage
dv / dt (C)
Vin = 120Vrms
(Fig.1)
Vin = 120Vrms, IT = 0.5Arms
(Fig.1)
Coupled Electrical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Trigger LED current
IFT
VT = 6V
―
―
10
mA
Capacitance
(input to output)
CS
VS = 0, f = 1MHz
―
1.5
―
pF
Isolation resistance
RS
VS = 500V
5×1010
1014
―
Ω
2500
―
―
AC, 1 second, in oil
―
5000
―
DC, 1 minute, in oil
―
5000
―
AC, 1 minute
Isolation voltage
BVS
Vrms
Vdc
Fig.1: dv / dt test circuit
Rin
VCC
120Ω
5V, VCC
2
8
0V
Vin
3
6
5
dv / dt (c)
RL
3
dv / dt
2002-09-25
TLP3502A
IF – Ta
IT(RMS) – Ta
(A)
1.0
80
On-state current IT (RMS)
Allowable forward current
IF (mA)
100
60
40
20
0
-20
0
40
20
60
80
100
0.8
0.6
0.4
0.2
0
-20
120
0
20
Ambient temperature Ta (°C)
100
120
Ta = 25°C
50
Ta = 25°C
(mA)
30
1000
500
Forward current IF
Allowable pulse forward current
IFP (mA)
80
IF – VF
100
PULSE WIDTH≤100μs
3000
60
Ambient temperature Ta (°C)
IFP – DR
5000
40
300
100
50
30
10
5
3
1
0.5
0.3
10
3
10
-3
3
10
-2
3
10
-1
3
10
0
0.1
0.6
Duty cycle ratio DR
0.8
1.0
1.2
Forward voltage
ΔVF /ΔTa – IF
1.4
VF
1.6
1.8
2.6
3.0
(V)
IFP – VFP
1000
(mA)
IFP
-2.4
-2.0
Pulse forward current
Forward voltage temperature
Coefficient ΔVF/ΔTa (mV/°C)
-2.8
-1.6
-1.2
-0.8
-0.4
0.1
0.3 0.5
1
3
Forward current
5
IF
10
30
500
300
100
50
30
10
Pulse width≤10µs
5
Repetitive frequency
3
= 100Hz
Ta = 25°C
50
1
0.6
(mA)
1.0
1.4
1.8
2.2
Pulse forward voltage VFP (V)
4
2002-09-25
TLP3502A
Normalized IFT – Ta
Normalized IH – Ta
3
VT = 3V
2
2
1.2
1
1.2
1
Holding current IH
(arbitrary unit)
Trigger led current IFT
(arbitrary unit)
3
0.5
0.3
0.1
-40
-20
0
20
40
60
80
0.5
0.3
0.1
-40
100
Ambient temperature Ta (°C)
-20
0
80
100
80
100
Normalized VDRM – Ta
VDRM = Rated
2
101
100
0
60
1.4
Off-state output terminal voltage
VDRM (arbitrary unit)
Peak off-state current IDRM
(arbitrary unit)
10
40
Ambient temperature Ta (°C)
Normalized IDRM – Ta
103
20
20
40
60
80
1.2
1.0
0.8
0.6
0.4
0.2
-40
100
-20
0
20
40
60
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
Normalized LED Current
– Led Current Pulse Width
10
Normalized led current
IF / IFT
5
3
2
1.6
1.2
1
0.5
0.3
10
30
50
100
Led current pulse width
300
PW
500
1000
(µs)
5
2002-09-25
TLP3502A
RESTRICTIONS ON PRODUCT USE
000707EBC
·
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
·
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
·
Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes
are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the
products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with
domestic garbage.
·
·
·
The products described in this document are subject to the foreign exchange and foreign trade laws.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
The information contained herein is subject to change without notice.
6
2002-09-25
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.