TOSHIBA TLP560G

TLP560G
TOSHIBA Photocoupler
GaAs Ired & Photo−Triac
TLP560G
Triac Driver
Programmable Controllers
AC−Output Module
Solid State Relay
Unit in mm
The TOSHIBA TLP560G consists of a photo−triac optically coupled to a
gallium arsenide infrared emitting diode in a six lead plastic DIP
package.
•
Peak off−state voltage: 400V(min.)
•
On−state current: 100mA(max.)
•
Isolation voltage: 2500Vrms(min.)
•
UL recognized: File No. E67349
•
Isolation operating voltage: 2500Vac or 300Vdc for isolation
group C*1
TOSHIBA
Trigger LED current
Weight: 0.39g
•
Classi−
fication*
Trigger LED Current (mA)
VT = 6V, Ta = 25°C
Min.
Max.
11−7A9
Marking of
Classification
(IFT5)
―
5
T5
(IFT7)
―
7
T5, T7
Standard
―
10
T5, T7, blank
*Ex. (IFT5); TLP560G(IFT5)
(Note) Application type name for certification test, please
use standard product type name, i.e.
TLP560G(IFT5): TLP560G
*1: According to VDE0110, table 4.
Pin Configuration (top view)
6
1
2
3
4
1 : Anode
2 : Cathode
3 : N.C.
4 : Terminal 1
6 : Terminal 2
1
2007-10-01
TLP560G
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
IF
50
mA
ΔIF / °C
−0.7
mA / °C
Peak forward current (100μs pulse, 100pps)
IFP
1
A
Reverse voltage
VR
5
V
Junction temperature
Tj
125
°C
VDRM
400
V
Forward current
LED
Forward current derating (Ta ≥ 53°C)
Off−state output terminal voltage
Detector
On−state RMS current
Ta = 25°C
100
IT(RMS)
Ta = 70°C
50
mA
ΔIT / °C
−1.1
mA / °C
ITP
2
A
ITSM
1.2
A
Tj
115
°C
Storage temperature range
Tstg
−55~125
°C
Operating temperature range
Topr
−40~100
°C
Lead soldering temperature (10s)
Tsol
260
°C
Isolation voltage (AC, 1min., R.H. ≤ 60%)
BVS
2500
Vrms
On−state current derating (Ta ≥ 25°C)
Peak on−state current (100μs pulse, 120pps)
Peak nonrepetitive surge current
(Pw = 10ms, DC = 10%)
Junction temperature
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Recommended Operating Conditions
Characteristic
Symbol
Min.
Typ.
Max.
Unit
Supply voltage
VAC
―
―
120
Vac
Forward current
IF
15
20
25
mA
Peak on−state current
ITP
―
―
1
A
Operating temperature
Topr
−25
―
85
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2007-10-01
TLP560G
Individual Electrical Characteristics (Ta = 25°C)
Detector
LED
Characteristic
Symbol
Test Condition
Min.
Typ.
Max.
Unit
Forward voltage
VF
IF = 10mA
1.0
1.15
1.3
V
Reverse current
IR
VR = 5V
―
―
10
μA
Capacitance
CT
V = 0, f = 1MHz
―
10
―
pF
Peak off−state current
IDRM
VDRM = 400V
―
10
100
nA
Peak on−state voltage
VTM
ITM = 100 mA
―
1.7
3.0
V
―
0.6
―
mA
200
500
―
V / μs
―
0.2
―
V / μs
Min.
Typ.
Max.
Unit
Holding current
IH
―
Critical rate of rise of
off−state voltage
dv / dt
Vin = 120Vrms, Ta = 85°C
Critical rate of rise of
commutating voltage
dv / dt(c)
Vin = 30Vrms, IT = 15mA
(Fig.1)
(Fig.1)
Coupled Electrical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Trigger LED current
IFT
VT = 3V
―
5
10
mA
Capacitance
(input to output)
CS
VS = 0, f = 1MHz
―
0.8
―
pF
Isolation resistance
RS
VS = 500V
―
Ω
5×10
AC, 1 minute
Isolation voltage
BVS
10
10
14
2500
―
―
AC, 1 second, in oil
―
5000
―
DC, 1 minute, in oil
―
5000
―
Vrms
Vdc
Fig.1: dv / dt test circuit
+
VCC
Rin
120Ω
–
5V, VCC
Vin
1
6
0V
2
3
4
dv / dt(c)
2kΩ
3
dv / dt
2007-10-01
TLP560G
IF – Ta
60
R. M. S. on-state current
IT (RMS) (mA)
Allowable forward current
IF (mA)
50
40
30
20
10
0
-20
IT(RMS) – Ta
120
100
80
60
40
20
0
20
40
60
100
80
0
-20
120
0
20
Ambient temperature Ta (℃)
40
IF (mA)
500
Forward current
(mA)
IFP
pulse forward current
Allowable
50
1000
300
100
50
30
10–3
10–2
3
10–1
3
10
5
3
1
0.5
0.1
0.6
100
3
0.8
ratio DR
ΔVF/ΔTa
1.0
1.2
Forward
– IF
1.6
1.4
1.8
voltage VF (V)
IFP – VFP
-3.2
1000
Pulse forward current IFP (mA)
Forward voltage temperature
coefficient ΔVF/ΔTa (mV/℃)
Ta = 25℃
30
0.3
Duty cycle
-2.8
-2.4
-2.0
-1.6
-1.2
-0.8
-0.4
0.1
120
IF – VF
100
PULSE WIDTH ≤ 100μs
Ta = 25℃
10
3
100
80
Ambient temperature Ta (℃)
IFP – DR
3000
60
0.3
1
Forward
3
current
10
IF
500
300
100
50
30
10
REPETITIVE
3
FREQUENCY=100Hz
Ta = 25℃
1
0.6
30
(mA)
PULSE WIDTH≤10μs
5
1.0
1.4
Pulse forward
4
1.8
2.2
2.6
voltage VFP (V)
2007-10-01
TLP560G
Normalized IFT – Ta
3
Normalized IH – Ta
3
VT = 3V
0.5
0.3
0.1
-40
-20
40
20
0
60
Ambient temperature Ta
off-state current IDRM
(arbitrary unit)
Peak
10
10
0.3
2
1
0
40
20
60
Ambient temperature Ta
10
-20
0
20
40
Ambient temperature Ta
Normalized IDRM – Ta
3
0
Normalized LED current
IF / IFT
0.5
(℃)
VDRM = Rated
10
1.2
1
0.1
-40
100
Off-state output terminal voltage VDRM
(arbitrary unit)
10
80
(arbitrary
1.2
1
unit)
2
Holding current IH
unit)
(arbitrary
Trigger
LED current IFT
2
80
100
80
100
80
100
(℃)
Normalized VDRM – Ta
1.4
1.2
1.0
0.8
0.6
0.4
0.2
-40
(℃)
60
-20
0
20
40
Ambient temperature Ta
60
(℃)
Normalized Current –
LED Current Pulse Width
5
3
2
1.6
1.2
1
10
30
50
100
LED current pulse width
300
500
1000
Pw (μs)
5
2007-10-01
TLP560G
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
6
2007-10-01