VO617A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS FEATURES A 1 4 C C 2 3 E • • • • • • • • • • • • Operating temperature from - 55 °C to + 110 °C Good CTR linearity depending on forward current Isolation test voltage, 5300 VRMS High collector emitter voltage, VCEO = 80 V Low saturation voltage Fast switching times Low CTR degradation Temperature stable Low coupling capacitance End stackable, 0.100" (2.54 mm) spacing High common mode interference immunity Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • • DESCRIPTION The 110 °C rated VO617A feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. AC adapters SMPS PLC Factory automation Game consoles AGENCY APPROVALS The coupling devices are designed for signal transmission between two electrically separated circuits. Safety application model number covering all products in this data sheet is VO617A. This model number should be used when consulting safety agency documents. • UL1577, file no. E52744 • cUL tested to CSA 22.2 bulletin 5A • DIN EN 60747-5-5 (VDE 0884-5), available with option 1 • BSI IEC 60950; IEC 60065 • FIMKO EN 60065, EN 60950-1 • CQC GB8898-2001 The couplers are end-stackable with 2.54 mm spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation up to an operation voltage of 400 VRMS or DC. Specifications subject to change. ORDERING INFORMATION V O 6 1 7 A - PART NUMBER # X CTR BIN 0 # # PACKAGE OPTION DIP-4 Option 6 7.62 mm 10.16 mm T TAPE AND REEL Option 7 > 8 mm CTR (%) AGENCY CERTIFIED/PACKAGE 5 mA UL, cUL, BSI, FIMKO 50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 80 to 160 130 to 260 DIP-4 VO617A VO617A-1 VO617A-2 VO617A-3 VO617A-4 - - DIP-4, 400 mil, option 6 - - - VO617A-3X006 VO617A-4X006 - - SMD-4, option 7 - - VO617A-2X007T VO617A-3X007T VO617A-4X007T - - VDE, UL, cUL, BSI, FIMKO 50 to 600 DIP-4, 400 mil, option 6 - SMD-4, option 7 - 40 to 80 63 to 125 100 to 200 160 to 320 80 to 160 130 to 260 - - VO617A-3X016 VO617A-4X016 - - VO617A-1X017T VO617A-2X017T VO617A-3X017T VO617A-4X017T VO617A-7X017T VO617A-8X017T Note • Additional options may be possible, please contact sales office. Rev. 1.8, 18-Apr-13 Document Number: 83430 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO617A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA Forward surge current tp 10 μs IFSM 2.5 A LED power dissipation at 25 °C Pdiss 70 mW Collector emitter voltage VCEO 80 V Emitter collector voltage VECO 7 V IC 50 mA tp/T = 0.5, tp 10 ms ICM 100 mA at 25 °C Pdiss 150 mW t = 1 min OUTPUT Collector current Collector peak current Ouput power dissipation COUPLER Isolation test voltage (RMS) VISO 5300 VRMS Total power dissipation Ptot 200 mW Operation temperature Tamb - 55 to + 110 °C Storage temperature range Tstg - 55 to + 150 °C Tsld 260 °C Soldering temperature (1) 2 mm from case, 10 s Ptot - Total Power Dissipation (mW) Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD), and wave profile for soldering conditions for through hole devices (DIP), please go to “Assembly Instructions” (www.vishay.com/doc?80054). 250 Coupled device 200 150 Detector 100 50 LED 0 0 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 1 - Total Power Dissipation vs. Ambient Temperature Rev. 1.8, 18-Apr-13 Document Number: 83430 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO617A www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER INPUT Forward voltage Reverse current Junction capacitance OUTPUT TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT VF IR Cj 1 1.35 0.01 13 1.65 10 V μA pF 2 2 5 5 5 5 5.2 50 50 100 100 100 100 0.25 0.4 0.4 IF = 60 mA VR = 6 V VR = 0 V, f = 1 MHz VCE = 10 V Collector emitter leakage current Collector emitter capacitance Collector emitter breakdown voltage Emitter collector breakdown voltage COUPLER Collector emitter saturation voltage Coupling capacitance VO617A-1 VO617A-2 VO617A-3 VO617A-4 VO617A-7 VO617A-8 ICEO VCE = 5 V, f = 1 MHz IC = 1 mA IE = 100 μA CCE BVCEO BVECO IF = 5 mA, IC = 1.0 mA f = 1 MHz VCEsat CC nA pF V V 80 7 V pF Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER IC/IF TEST CONDITION IF = 5 mA, VCE = 5 V PART SYMBOL MIN. VO617A CTR 50 TYP. MAX. UNIT 600 % VO617A-1 CTR 40 80 % VO617A-2 CTR 63 125 % VO617A-3 CTR 100 200 % VO617A-4 CTR 160 320 % VO617A-7 CTR 80 160 % VO617A-8 CTR 130 260 % MAX. UNIT SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION CTR BIN SYMBOL MIN. TYP. NON-SATURATED Rise and fall time Turn-on time Turn-off time Cut-off frequency IF = 5 mA, VCC = 5 V, RL = 75 tr, tf 2 μs IF = 5 mA, VCC = 5 V, RL = 75 ton 3 μs toff 2.3 μs fctr 100 kHz IF = 5 mA, VCC = 5 V, RL = 75 SATURATED Turn-on time IF = 5 mA ton 6 μs Turn-off time IF = 5 mA toff 25 μs Rise time IF = 5 mA tr 4.6 μs Fall time IF = 5 mA tf 15 μs Rev. 1.8, 18-Apr-13 Document Number: 83430 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO617A www.vishay.com IF Vishay Semiconductors +5V IF IF 0 0 tp IC R G = 50 Ω tp = 0.01 T t 100 % 90 % t p = 50 µs Channel I Oscilloscope R L = 1 MΩ C L = 20 pF Channel II 50 Ω 10 % 0 tr RL td tf t off ts t on 95 10804-3 tp td tr t on (= td + tr) Fig. 2 - Test Circuit, Non-Saturated Operation IF Pulse duration Delay time Rise time Turn-on time ts tf t off (= ts + tf) Storage time Fall time Turn-off time 96 11698 +5V I F = 10 mA t Fig. 4 - Switching Times 0 IC R G = 50 Ω tp = 0.01 T t p = 50 µs Channel I Oscilloscope R L ≥ 1 MΩ C L ≤ 20 pF Channel II 50 Ω 1 kΩ 95 10843 Fig. 3 - Test Circuit, Saturated Operation SAFETY AND INSULATION RATINGS PARAMETER SYMBOL VALUE UNIT Output safety power PSO 265 mW Input safety current Isi 130 mA Safety temperature TS 150 °C Comparative tracking index CTI 175 MAXIMUM SAFETY RATINGS INSULATION RATED PARAMETERS Maximum withstanding isolation voltage VISO 5300 VRMS Maximum transient isolation voltage VIOTM 8000 Vpeak Maximum repetitive peak isolation voltage VIORM 890 Vpeak Insulation resistance Tamb = 25 °C, VDC = 500 V RIO 1012 Isolation resistance Tamb = 100 °C, VDC = 500 V RIO 1011 Climatic classification (according to IEC 68 part 1) Environment (pollution degree in accordance to DIN VDE 0109) Internal and external creepage Clearance Insulation thickness 55/110/21 2 Standard DIP-4 7 mm 400 mil DIP-4 8 mm Standard DIP-4 7 mm 400 mil DIP-4 8 mm 0.4 mm Note • As per DIN EN 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. Rev. 1.8, 18-Apr-13 Document Number: 83430 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO617A www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 14 Tamb = 110 °C Tamb = 75 °C Tamb = 25 °C Tamb = 0 °C Tamb = - 55 °C 10 IC - Collector Current (mA) IF - Forward Current (mA) 100 1 0.1 IF = 10 mA 12 10 8 6 4 0.8 1.0 1.2 1.4 1.6 0 VF - Forward Voltage (V) IF = 2 mA IF = 35 mA 45 IF = 30 mA 40 35 IF = 25 mA 30 IF = 20 mA 25 20 IF = 15 mA 15 10 IF = 10 mA IF = 1 mA 5 IF = 5 mA 0 0 1 2 3 4 5 6 7 8 0.2 0.3 0.4 9 10 Fig. 8 - Collector Current vs. Collector Emitter Voltage NCTR - Normalized CTR (non-saturated) 55 50 0.1 VCE - Collector Emitter Voltage (V) Fig. 5 - Forward Voltage vs. Forward Current IC - Collector Current (mA) IF = 1 mA 2 0 0.6 1.2 IF = 5 mA 1.0 0.8 0.6 0.4 0.2 0 Fig. 6 - Collector Current vs. Collector Emitter Voltage Normalized to CTR value: IF = 5 mA, VCE = 5 V, Tamb = 25 °C - 60 - 40 - 20 0 VCE - Collector Emitter Voltage (V) 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 9 - Normalized Current Transfer Ratio (non-sat.) vs. Ambient Temperature 1.2 IF = 0 mA 1000 VCE = 40 V 100 10 VCE = 24 V 1 0.1 VCE = 12 V 0.01 0.001 NCTR - Normalized CTR (sat) 10 000 ICE0 - Leakage Current (nA) IF = 5 mA IF = 5 mA 1.0 0.8 0.6 0.4 0.2 0 - 60 - 40 - 20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 7 - Leakage Current vs. Ambient Temperature Rev. 1.8, 18-Apr-13 Normalized to CTR value: IF = 5 mA, VCE = 5 V, Tamb = 25 °C - 60 - 40 - 20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 10 - Normalized Current Transfer Ratio (sat.) vs. Ambient Temperature Document Number: 83430 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO617A Vishay Semiconductors 0.40 0 IF = 10 mA 0.35 0.30 0.25 Ic = 2 mA 0.15 0.10 Ic = 1 mA 0.05 RL = 100 Ω - 40 Ic = 5 mA 0.20 VCE = 5 V - 20 Phase Angle (deg) VCEsat - Collector Emitter Voltage (V) www.vishay.com RL = 1000 Ω - 60 - 80 - 100 - 120 - 140 0.00 - 160 - 60 - 40 - 20 0 20 40 60 80 100 120 1 Tamb - Ambient Temperature (°C) 1000 Fig. 14 - FCTR vs. Phase Angle 1.4 1000 Tamb = 0 °C 1.2 VCC = 5 V Tamb = - 55 °C FCTR (kHz) Tamb = 25 °C 1.0 0.8 0.6 Tamb = 75 °C 0.4 Tamb = 100 °C Normalized to: IF = 5 A, VCE = 5 V, Tamb = 25 °C 0.2 0 0.1 1 10 100 10 1 0.1 100 1 IF - Forward Current (mA) 10 100 IC (mA) Fig. 12 - Normalized CTR (non-sat.) vs. Forward Current Fig. 15 - FCTR vs. Collector Current 1000 1.2 VCE = 0.4 V Normalized to: IF = 5 mA, VCE = 5 V, Tamb = 25 °C 1.0 0.8 Tamb = 0 °C VCE = 5 V, IF = 2 mA Tamb = - 55 °C 0.6 0.4 Tamb = 25 °C 0.2 Tamb = 75 °C Tamb = 100 °C 0 0.1 1 10 100 toff (μs) 10 1 ton (μs) 0.1 100 IF - Forward Current (mA) Fig. 13 - Normalized CTR (sat.) vs. Forward Current Rev. 1.8, 18-Apr-13 ton, toff Switching Time (μs) NCTR - Normalized CTR (sat) 100 f - Frequency (kHz) Fig. 11 - Collector Emitter Voltage vs. Ambient Temperature NCTR - Normalized CTR (NS) 10 0 5 10 15 20 RL - Load Resistance (kΩ) Fig. 16 - Switching Time vs. Load Resistance Document Number: 83430 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO617A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 1.2 ± 0.1 4 3 6.5 ± 0.5 Pin 1 identifier 1 2 0.85 ± 0.1 7.62 ± 0.3 4.58 ± 0.5 0.85 ± 0.1 3.5 ± 0.3 1.2 ± 0.1 0.5 typ. 0.26 3.3 ± 0.5 2.8 ± 0.5 0.5 ± 0.1 2.54 ± 0.25 7.62 to 9.98 Option 6 Option 7 7.62 typ. 7.62 typ. 3.5 ± 0.3 0.35 + 0.25 - 0.3 3.5 ± 0.3 0.1 min. 0.6 min. 8 min. 2.7 min. 10.16 ± 0.3 0.76 10.16 typ. 1.78 2.54 R 0.25 1.52 8 min. 11.05 PACKAGE MARKING (example of VO617A-3X017T) VO617A-3 V YWW 25 Notes • The VDE logo is only marked on option 1 parts. Option information is not marked on the part. • Tape and reel suffix (T) is not part of the package marking. Rev. 1.8, 18-Apr-13 Document Number: 83430 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO617A www.vishay.com Vishay Semiconductors PACKING INFORMATION DEVICE PER TUBE TYPE UNITS/TUBE TUBES/BOX UNITS/BOX DIP-4 100 40 4000 Regular, special, or bar code label Tape slot in core 13" 17999-1 Fig. 17 - Tape and Reel Shipping Medium (1000 units per reel) Ø 1.55 ± 0.05 2 ± 0.1 4 ± 0.1 1.75 ± 0.1 7.5 ± 0.1 16 ± 0.3 8 ± 0.1 0.3 ± 0.05 22536-3 Fig. 18 - Tape and Packing for Option 7 Rev. 1.8, 18-Apr-13 Document Number: 83430 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000