Alternative Device Available SFH1690AT, SFH1690BT, SFH1690CT, SFH1690ABT www.vishay.com Vishay Semiconductors Optocoupler Phototransistor Output, SOP-4, Mini-Flat Package, 110 °C Rated FEATURES • Operating temperature from - 55 °C to + 110 °C • SOP (small outline package) A 1 4 C C 2 3 E • Isolation test voltage, 3750 VRMS (1 s) • Low saturation voltage • Fast switching times Available • Low coupling capacitance • End-stackable, 0.100" (2.54 mm) spacing i179066 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS DESCRIPTION • PLCs The 110 °C rated SFH1690AT, SFH1690BT, SFH1690CT, and SFH1690ABT family has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 4 pin 100 mil lead pitch miniflat package. It features a high current transfer ratio, low coupling capacitance, and high isolation voltage. • Telecommunication AGENCY APPROVALS • UL1577, file no. E52744 system code U • cUL - file no. E52744, cUL tested to CSA 22.2 bulletin 5A • DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 (pending) available with option 1 The coupling devices are designed for signal transmission between two electrically separated circuits. The SFH1690 series is available only on tape and reel. There are 2000 parts per reel. • BSI tested to IEC 60065 and IEC 60950-2001 ORDERING INFORMATION S F H 1 6 9 0 # PART NUMBER # T - X TAPE AND REEL SOP-4, Mini flat VDE, UL, cUL, BSI SOP-4, Mini flat 0 1 SOP-# VDE OPTION 7.21 mm AGENCY CERTIFIED/PACKAGE UL, cUL, BSI 0 CTR (%) 50 to 300 50 to 150 100 to 300 100 to 200 SFH1690ABT SFH1690AT SFH1690BT SFH1690CT 50 to 300 50 to 150 100 to 300 100 to 200 - - SFH1690BT-X001 - Note • For additional information on the available options refer to option information. Rev. 2.1, 23-May-13 Document Number: 83537 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Alternative Device Available SFH1690AT, SFH1690BT, SFH1690CT, SFH1690ABT www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT DC forward current IF 50 mA Reverse voltage VR 6 V IFSM 2.5 A INPUT tp 10 μs Surge forward current Power dissipation Pdiss Derate linearly from 25 °C 80 mW 0.7 mW/°C OUTPUT Collector emitter voltage VCEO 70 V Emitter collector voltage VECO 7 V IC 50 mA IC 100 mW Pdiss 150 mW 1.5 mW/°C VISO 3750 VRMS Operating temperature range Tamb - 55 to + 110 °C Storage temperature range Tstg - 55 to + 150 °C Tsld 260 °C Collector current tp 1 ms Power dissipation Derate linearly from 25 °C COUPLER Isolation test voltage between emitter and detector t=1s max. 10 s dip soldering distance to seating plane 1.5 mm Soldering temperature Note • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. Ptot - Power Dissipation (mW) 175 150 Phototransistor 125 100 75 Diode 50 25 0 0 17567 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 1 - Permissible Power Dissipation vs. Temperature Rev. 2.1, 23-May-13 Document Number: 83537 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Alternative Device Available SFH1690AT, SFH1690BT, SFH1690CT, SFH1690ABT www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 5 mA VF 1.15 1.4 V Reverse current VR = 6 V IR 0.01 10 μA VR = 0 V, f = 1 MHz CO 14 Collector emitter leakage current VCE = 20 V ICEO Collector emitter breakdown voltage IC = 100 μA BVCEO 70 V Emitter collector breakdown voltage IE = - 10 μA BVECO 7 V Collector emitter saturation voltage IF = 10 mA, IC = 2.5 mA VCEsat 0.25 VCE = 5 V, f = 1 MHz CCE 2.8 pF CC 0.3 pF CIO 0.5 pF Capacitance pF OUTPUT Collector emitter capacitance 100 0.4 nA V COUPLER Coupling capacitance f = 1 MHz Capacitance (input to output) Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION IC/IF IF = 5 mA, VCE = 5 V PART SYMBOL MIN. SFH1690ABT CTR 50 TYP. MAX. UNIT 300 % SFH1690AT CTR 50 150 % SFH1690BT CTR 100 300 % SFH1690CT CTR 100 200 % Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Rise time TEST CONDITION SYMBOL VCC = 5 V, IC = 2 mA, RL = 100 tr MIN. TYP. 3 MAX. UNIT μs Fall time VCC = 5 V, IC = 2 mA, RL = 100 tf 4 μs Turn-on time VCC = 5 V, IC = 2 mA, RL = 100 ton 5 μs Turn-off time VCC = 5 V, IC = 2 mA, RL = 100 toff 3 μs IF R L = 100 Ω V CC = 5 V 50 Ω isfh690at_01 Fig. 2 - Switching Operation (without Saturation) Rev. 2.1, 23-May-13 Document Number: 83537 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Alternative Device Available SFH1690AT, SFH1690BT, SFH1690CT, SFH1690ABT www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. TYP. Climatic classification (according to IEC 68 part 1) MAX. UNIT 55/110/21 Pollution degree (DIN VDE 0109) 2 Comparative tracking index per DIN IEC112/ VDE 0303 part 1, group Illa per DIN VDE 6110 175 399 mm 175 VIOTM VIORM VIOTM 6000 VIORM 707 399 V V VIO = 500 V, Tamb = 25 °C RIO 1012 VIO = 500 V, Tamb = 100 °C RIO 1011 PSO 350 mW ISI 150 mA Isolation resistance TSI 165 °C Creepage distance 5 mm Clearance distance 5 mm 0.4 mm Insulation thickness between emitter and detector Note • As per IEC 60747-5-5, §7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 40 VF - Forward Voltage (V) 1.5 Tamb = 0 °C 1.4 1.3 Tamb = - 55 °C 1.2 1.1 1.0 Tamb = 25 °C 0.9 0.8 Tamb = 75 °C 0.7 Tamb = 110 °C 0.6 IC - Collector Current (mA) 1.6 35 IF = 20 mA 30 25 IF = 15 mA 20 IF = 10 mA 15 10 IF = 5 mA 5 0 0.1 1 10 100 IF - Forward Current (mA) Fig. 3 - Forward Voltage vs. Forward Current Rev. 2.1, 23-May-13 0 1 2 3 4 5 6 7 8 VCE - Collector Emitter Voltage (NS) (V) Fig. 4 - Collector Current vs. Collector Emitter Voltage (NS) Document Number: 83537 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Alternative Device Available SFH1690AT, SFH1690BT, SFH1690CT, SFH1690ABT www.vishay.com Vishay Semiconductors 10 000 1.4 NCTR - Normalized CTR (NS) ICE0 - Leakage Current (nA) IF = 0 mA 1000 VCE = 40 V 100 10 VCE = 24 V 1 0.1 VCE = 12 V 0.01 0.001 1.0 IF = 5 mA 0.8 0.6 IF = 1 mA 0.4 0.2 0 - 60 - 40 - 20 0 20 40 60 IF = 10 mA 1.2 80 100 120 Normalized to: IF = 5 mA, VCE = 5 V, Tamb = 25 °C - 60 - 40 - 20 0 Tamb - Ambient Temperature (°C) Fig. 5 - Leakage Current vs. Ambient Temperature 10 8 IF = 5 mA 6 4 IF = 1 mA IF = 2 mA 2 NCTR - Normalized CTR (sat) IC - Collector Current (mA) IF = 10 mA 0 1.0 80 100 120 0.8 0.1 0.2 0.3 Tamb = 25 °C 0.6 0.4 Tamb = - 55 °C 0.2 0.4 Tamb = 75 °C Tamb = 110 °C 0.1 VCE - Collector Emitter Voltage (sat) (V) Fig. 6 - Collector Current vs. Collector Emitter Voltage (sat) Tamb = 0 °C VCE = 0.4 V Normalized to: IF = 5 mA, VCE = 5 V, Tamb = 25 °C 0 0 1 10 100 IF - Forward Current (mA) Fig. 9 - Normalized CTR (sat) vs. Forward Current 1.4 1.0 IF = 5 mA 0.8 IF = 10 mA 0.6 IF = 1 mA 0.4 VCE = 0.4 V Normalized to: IF = 5 mA, VCE = 5 V, Tamb = 25 °C - 60 - 40 - 20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 7 - Normalized Current Transfer Ratio (sat) vs. Ambient Temperature Rev. 2.1, 23-May-13 NCTR - Normalized CTR (NS) 1.2 NCTR - Normalized CTR (sat) 60 1.2 12 0 40 Fig. 8 - Normalized Current Transfer Ratio (NS) vs. Ambient Temperature 14 0.2 20 Tamb - Ambient Temperature (°C) Tamb = 0 °C 1.2 Tamb = - 55 °C 1.0 Tamb = 25 °C 0.8 Tamb = 75 °C 0.6 Tamb = 110 °C 0.4 Normalized to: IF = 5 A, VCE = 5 V, Tamb = 25 °C 0.2 0 0.1 1 10 100 IF - Forward Current (mA) Fig. 10 - Normalized CTR (NS) vs. Forward Current Document Number: 83537 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Alternative Device Available SFH1690AT, SFH1690BT, SFH1690CT, SFH1690ABT www.vishay.com Vishay Semiconductors 1000 0 VCE = 5 V - 40 Phase (deg) VCE = 5 V, IF = 5 mA ton, toff Switching Time (μs) - 20 - 60 - 80 - 100 - 120 - 140 100 toff 10 ton 1 0.1 - 160 1 10 100 1000 0.1 1 10 100 RL - Load Resistance (kΩ) f (kHz) Fig. 11 - FCTR vs. Phase Angle Fig. 13 - Switching Time vs. Load Resistance 1000 FCTR (kHz) VCC = 5 V 100 10 1 0.1 1 10 100 IC (mA) Fig. 12 - FCTR vs. Collector Current Rev. 2.1, 23-May-13 Document Number: 83537 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Alternative Device Available SFH1690AT, SFH1690BT, SFH1690CT, SFH1690ABT www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 4 3 5.59 5.08 40° 0.46 0.33 4.83 4.32 ISO method A 1 10° 0.20 0.10 0.63 0.38 2 Pin one ID (on chamfer side of package) 4.67 4.17 0.61 0.86 7.21 6.71 6° R 0.25 0.36 2.03 1.91 2.54 0.46 0.36 0.91 Lead coplanarity 0.10 max. 5.08 7.37 2.67 2.41 1.14 i178037 PACKAGE MARKING 1690A V YWW U68 17944-4 (example for SFH1690AT) 1690B V YWW U68X1 17944-7 (example for SFH1690BT-X001) Notes • The marking of the SFH1690ABT will either show 1690A or 1690B on the first line. • Tape and reel suffix (T) is not part of the package marking. Rev. 2.1, 23-May-13 Document Number: 83537 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000