TG2206F TOSHIBA GaAs Linear Integrated Circuit GaAs Monolithic TG2206F RF SPDT Swith Switch The Receive Filter for Mobile Communication Switch The Diversity Antenna Switch The Local Signal Features l Low insertion loss: LOSS = 0.4dB (typ.) l Hight isolation: ISL = 28dB (typ.) l Low voltage operation: VC = 0 V/2.5 V l Small package: SM6 package (2.9 × 1.6 × 1.1 mm) Pin Assignment (top view) Marking Weight: 0.014 g (typ.) Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit VC1 5 V VC2 5 V Pi 1 W Operating temperature range Topr −40~85 °C Storage temperature range Tstg −55~125 °C Control voltage Input power Caution This device is electrostatic sensitivity. Please handle with caution. 1 2002-07-31 TG2206F Electrical Characteristics (f = 1 GHz, Ta = 25°C, Zg = ZI = 50 Ω) Characteristics Symbol Test Circuit LOSS (1) 1 LOSS (2) Min Typ. Max VC1 = 2.5 V, VC2 = 0 V, Pi = 0dBmW ― 0.4 0.7 1 VC1 = 0 V, VC2 = 2.5 V, Pi = 0dBmW ― 0.4 0.7 ISL (1) 1 VC1 = 2.5 V, VC2 = 0 V, Pi = 0dBmW 25 28 ― ISL (2) 1 VC1 = 0 V, VC2 = 2.5 V, Pi = 0dBmW 25 28 ― Po1dB 1 VC1 = 2.5 V, VC2 = 0 V or VC1 = 0 V, VC2 = 2.5 V 15 20 ― IC1 ― ― ― 0.01 IC2 ― ― ― 0.01 tSW ― ― 0.01 ― Insertion loss Isolation Output power at 1dB gain compression Control current Switching time Test Condition VC1 = 0 V, VC2 = 3 V or VC1 = 3 V, VC2 = 0 V VC1 = 0 V, VC2 = 3 V or VC1 = 3 V, VC2 = 0 V Unit dB dB dBmW mA µs Block Diagram Switch Condition Control Voltage Switch Condition VC1 = 2.5 V RFCom − RF1 OFF VC2 = 0 V RFCom − RF2 ON VC1 = 0 V RFCom − RF1 ON VC2 = 2.5 V RFCom − RF2 OFF 2 2002-07-31 TG2206F Test Circuit 1 (RF Test Circuit) Please fix the value of each capacity for using frequency and circuit. Notice The circuits and measurements contained in this document are given only in the context of as examples of applications for these products. Moreover, these example application circuits are not intended for mass production, since the high-frequency characteristics (the AC characteristics) of these devices will be affected by the external components which the customer uses, by the design of the circuit and by various other conditions. It is the responsibility of the customer to design external circuits which correctly implement the intended application, and to check the characteristics of the design. TOSHIBA assume no responsibility for the integrity of customer circuit designs or applications. Recommend Capacity 85 MHz 0.8~1 GHz 1.6 GHz 2 GHz C1 100 pF 100 pF 22 pF 9 pF C2 100 pF 16 pF 10 pF 9 pF C3 150 pF 13 pF 4 pF 3 pF 3 2002-07-31 TG2206F 4 2002-07-31 TG2206F 5 2002-07-31 TG2206F Package Dimensions 6 2002-07-31 TG2206F RESTRICTIONS ON PRODUCT USE 020704EBC · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · Gallium (GaAs) Arsenide is a substance used in the products described in this document. GaAs dust or vapor is harmful to the human body. Do not break, cut, crushu or dissolve chemically. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 7 2002-07-31