TLP4227G,TLP4227G-2 TOSHIBA Photocoupler Photorelay TLP4227G, TLP4227G-2 PBX Telecommunication Modem･FAX Cards, Modems In PC Measurement Instrumentation Unit: mm The TOSHIBA TLP4227G series consists of an gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a plastic DIP package. The TLP4227G series are a bi-directional switch, which can replace mechanical relays in many applications. · TLP4227G: 4 pin DIP (DIP4), 1 channel type (1 form B) · TLP4227G-2: 8 pin DIP (DIP8), 2 channel type (2 form B) · Peak off-state voltage: 350 V (min) · Trigger LED current: 3 mA (max) · On-state current: 150 mA (max) · On-state resistance: 25 Ω (max) · Isolation voltage: 2500 Vrms (min) · UL recognized: UL1577 File No. E67349 JEDEC ― JEITA ― TOSHIBA Pin Configuration (top view) 11-5B2 Weight: 0.26 g (typ.) TLP4227G TLP4227G-2 1 4 1 8 2 3 2 7 3 6 4 5 1: ANODE 2: CATHODE 3: DRAIN 4: DRAIN 1, 3 : ANODE 2, 4 : CATHODE 5 : DRAIN D1 6 : DRAIN D2 7 : DRAIN D3 8 : DRAIN D4 1 JEDEC ― JEITA ― TOSHIBA 11-10C4 Weight: 0.54 g (typ.) 2002-04-18 TLP4227G,TLP4227G-2 Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit IF 50 mA DIF/°C -0.5 mA/°C Peak forward current (100 ms pulse, 100 pps) IFP 1 A Reverse voltage VR 5 V Junction temperature Tj 125 °C VOFF 350 V ION 150 mA DION/°C -1.5 mA/°C Tj 125 °C Storage temperature range Tstg -55 to 125 °C Operating temperature range Topr -40 to 85 °C Lead soldering temperature (10 s) Tsol 260 °C BVS 2500 Vrms Forward current LED Forward current derating (Ta > = 25°C) Off-state output terminal voltage TLP4227G Detector On-state current One channel TLP4227G-2 Both channel (Note 1) TLP4227G On-state current derating (Ta > = 25°C) One channel TLP4227G-2 Both channel (Note 1) Junction temperature Isolation voltage (AC, 1 min, R.H. < = 60%) (Note 2) Note 1: Two channels operating simultaneously. Note 2: Device considered a two-terminal device: LED side pins shorted together, and DETECTOR side pins shorted together. Recommended Operating Conditions Characteristics Symbol Min Typ. Max Unit Supply voltage VDD ¾ ¾ 280 V Forward current IF 5 ¾ 25 mA On-state current ION ¾ ¾ 150 mA Operating temperature Topr -20 ¾ 65 °C Individual Electrical Characteristics (Ta = 25°C) Detector LED Characteristics Symbol Test Condition Min Typ. Max Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V ¾ ¾ 10 mA Capacitance CT V = 0, f = 1 MHz ¾ 30 ¾ pF Off-state current IOFF VOFF = 350 V ¾ ¾ 1 mA Capacitance COFF V = 0, f = 1 MHz, IF = 5 mA ¾ 65 ¾ pF 2 2002-04-18 TLP4227G,TLP4227G-2 Coupled Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Trigger LED current IFC IOFF = 10 mA ¾ 1 3 mA Return LED current IFT ION = 150 mA 0.1 ¾ ¾ mA On-state resistance RON ION = 150 mA ¾ 15 25 W Min Typ. Max Unit 0.8 ¾ pF W Isolation Characteristics (Ta = 25°C) Characteristics Symbol Capacitance input to output Isolation resistance Test Condition CS VS = 0, f = 1 MHz RS VS = 500 V, R.H. < = 60% ¾ 10 5 ´ 10 10 ¾ 2500 ¾ ¾ AC, 1 s, in oil ¾ 5000 ¾ DC, 1 min, in oil ¾ 5000 ¾ Vdc Min Typ. Max Unit ¾ ¾ 1 ms ¾ ¾ 3 ms AC, 1 min Isolation voltage BVS 14 Vrms Switching Characteristics (Ta = 25°C) Characteristics Symbol Turn-on time Turn-off time Test Condition tON RL = 200 W tOFF VDD = 20 V, IF = 5 mA (Note 3) Note 3: Switching time test circuit IF 1 TLP4227G 4 RL VDD IF VOUT 2 3 VOUT 10% tON IF 1 TLP4227G-2 8 RL 90% tOFF VDD VOUT 2 7 3 2002-04-18 TLP4227G,TLP4227G-2 IF – Ta ION – Ta 300 (mA) 80 On-state current ION Allowable forward current IF (mA) 100 60 40 20 0 -20 0 20 40 60 80 100 250 200 150 100 50 0 -20 120 0 Ambient temperature Ta (°C) 20 IF – VF 100 120 ION – VON Ta = 25°C Ta = 25°C (mA) 10 On-state current ION (mA) Forward current IF 80 200 30 5 3 1 0.5 0.3 0.1 0.6 0.8 1 1.2 Forward voltage 1.4 VF 1.6 100 0 -100 -200 -2 1.8 -1 (V) 0 On-state voltage RON – Ta 1 VON 2 (V) IFC – Ta 20 5 ION = 150 mA ION = 150 mA (mA) t < 1s 15 4 IFC RON (W) 60 Ambient temperature Ta (°C) 100 50 40 Trigger LED current On-state resistance 3 10 5 0 -20 0 20 40 60 80 2 1 0 -40 100 Ambient temperature Ta (°C) -20 0 20 40 60 80 100 Ambient temperature Ta (°C) 4 2002-04-18 TLP4227G,TLP4227G-2 tON, tOFF – IF tON, tOFF – Ta 1200 Ta = 25°C 1000 (ms) VDD = 20 V, RL = 200 W tOFF tON, tOFF 500 300 tON Switching time Switching time tON, tOFF (ms) 2000 100 50 30 1 3 5 Input current 10 30 IF 50 100 1000 VDD = 20 V, RL = 200 W IF = 5 mA 800 600 400 tON 200 0 -40 (mA) tOFF -20 0 20 40 60 80 100 Ambient temperature Ta (°C) IOFF – Ta 1000 Off-state current IOFF (nA) VOFF = 350 V IF = 5 mA 100 10 1 0 20 40 60 80 100 Ambient temperature Ta (°C) 5 2002-04-18 TLP4227G,TLP4227G-2 RESTRICTIONS ON PRODUCT USE 000707EBC · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 6 2002-04-18