2SC2882 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process) 2SC2882 Power Amplifier Applications Voltage Amplifier Applications Unit: mm • Suitable for driver of 30 to 35 watts audio amplifier • Small flat package • PC = 1.0 to 2.0 W (mounted on a ceramic substrate) • Complementary to 2SA1202 Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 80 V Collector-emitter voltage VCEO 80 V Emitter-base voltage VEBO 5 V IC 400 mA IB 80 mA PC 500 Collector current Base current Collector power dissipation PC 1000 (Note 1) Junction temperature Storage temperature range PW-MINI mW Tj 150 °C Tstg −55 to 150 °C JEDEC ― JEITA SC-62 TOSHIBA 2-5K1A Weight: 0.05 g (typ.) 2 Note 1: Mounted on a ceramic substrate (250 mm × 0.8 t) 1 2004-07-07 2SC2882 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 80 V, IE = 0 ― ― 0.1 µA Emitter cut-off current IEBO VEB = 5 V, IC = 0 ― ― 0.1 µA V (BR) CEO IC = 10 mA, IB = 0 80 ― ― V IE = 2 mA, IC = 50 mA 70 ― 240 hFE (2) VCE = 2 V, IC = 200 mA 40 ― ― VCE (sat) IC = 200 mA, IB = 20 mA ― ― 0.4 V 0.55 ― 0.8 V VCE = 10 V, IC = 10 mA ― 100 ― MHz VCB = 10 V, IE = 0, f = 1 MHz ― 10 ― pF Collector-emitter breakdown voltage hFE (1) DC current gain (Note 2) Collector-emitter saturation voltage Base-emitter voltage Transition frequency Collector output capacitance Note 2: hFE(1) classification VBE fT Cob VCE = 2 V, IC = 5 mA ― O: 70 to 140, Y: 120 to 240 Marking Part No. (or abbreviation code) E Lot No. Characteristics indicator A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2004-07-07 2SC2882 IC – VCE hFE – IC 400 1000 300 hFE 2 DC current gain (mA) 500 Ta = 25°C 3 Collector current IC Common emitter Common emitter 5 200 1 IB = 0.5 mA 100 VCE = 2 V 300 Ta = 100°C 25 −25 100 50 30 0 0 0 2 4 6 Collector-emitter voltage 8 VCE 10 1 10 3 (V) 10 30 Collector current VCE (sat) – IC 100 IC (mA) IC – VBE 500 1 Common emitter Common emitter IC/IB = 10 VCE = 2 V (mA) 0.5 0.3 Collector current IC Collector-emitter saturation voltage VCE (sat) (V) 300 0.1 Ta = 100°C 0.05 25 −25 0.03 1 10 3 30 Collector current 100 400 300 Ta = 100°C 100 0 0 300 −25 25 200 0.2 IC (mA) 0.4 0.6 0.8 Base-emitter voltage VBE 1.0 1.2 (V) Safe Operating Area 2000 1000 IC max (pulse)* PC – Ta 300 1.2 1 ms* PC (W) 10 ms* 100 ms* 100 Collector power dissipation Collector current IC (mA) 500 IC max (continuous) 50 DC operation Ta = 25°C 30 10 *: Single nonrepetitive pulse 5 Ta = 25°C 3 Curves must be derated linearly with increase in temperature. Tested without a substrate. 1 0.5 1 3 10 1.0 (1) Mounted on a ceramic (1) substrate (250 mm2 × 0.8 t) (2) No heat sink 0.8 0.6 (2) 0.4 0.2 VCEO max 30 Collector-emitter voltage 100 VCE 0 0 300 (V) 20 40 60 80 100 Ambient temperature 3 Ta 120 140 160 (°C) 2004-07-07 2SC2882 RESTRICTIONS ON PRODUCT USE 030619EAA • The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 4 2004-07-07