2SC3671 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) 2SC3671 Strobe Flash Applications Medium Power Amplifier Applications • Unit: mm High DC current gain and excellent hFE linearity : hFE = 140 to 450 (VCE = 2 V, IC = 0.5 A) : hFE = 70 (min) (VCE = 2 V, IC = 4 A) • Low saturation voltage: VCE (sat) = 1.0 V (max) (IC = 4 A, IB = 0.1 A) • High collector power dissipation Maximum Ratings (Ta = 25°C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage DC Collector current Pulse Symbol Rating Unit VCBO 50 V VCES 40 VCEO 20 VEBO 8 IC 5 V V A ICP 8 Base current IB 0.5 A Collector power dissipation PC 1000 mW Junction temperature Tj 150 °C Tstg −55 to 150 °C (Note 1) Storage temperature range JEDEC ― JEITA ― TOSHIBA 2-7D101A Weight: 0.2 g (typ.) Note 1: Pulse test: Pulse width = 10 ms (max), duty cycle = 30% (max) Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 40 V, IE = 0 ― ― 100 nA Emitter cut-off current IEBO VEB = 8 V, IC = 0 ― ― 100 nA Collector-emitter breakdown voltage VCEO IC = 10 mA, IB = 0 20 ― ― V VEBO IE = 1 mA, IC = 0 8 ― ― V VCE = 2 V, IC = 0.5 A 140 ― 450 Emitter-base breakdown voltage hFE (1) DC current gain Collector-emitter saturation voltage Base-emitter voltage Transition frequency Collector output capacitance Note 2: hFE (1) classification (Note 2) hFE (2) VCE = 2 V, IC = 4 A 70 ― ― VCE (sat) IC = 4 A, IB = 0.1 A ― ― 1.0 V VBE VCE = 2 V, IC = 4 A ― ― 1.5 V VCE = 2 V, IC = 0.5 A ― 100 ― MHz VCB = 10 V, IE = 0, f = 1 MHz ― 40 ― pF fT Cob A: 140 to 240, B: 200 to 330, C: 300 to 450 1 2004-07-07 2SC3671 Marking C3671 Part No. (or abbreviation code) Lot No. Characteristics indicator A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2004-07-07 2SC3671 IC – VCE hFE – IC 1000 8 200 Ta = 25°C 100 DC current gain IC (A) Collector current 6 hFE Common emitter 150 70 50 30 4 20 300 Ta = 100°C 25 −25 100 50 30 Common emitter VCE = 2 V IB = 10 mA 2 500 10 0.01 0.03 1 3 2 4 Collector-emitter voltage VCE 1.6 2.0 IC – VBE 8 Common emitter Common emitter IC/IB = 40 IC (A) VCE = 2 V 25 0.5 0.3 −25 Ta = 100°C Collector current Collector-emitter saturation voltage VCE (sat) (V) 10 (V) VCE (sat) – IC 0.1 0.05 0.03 0.01 3 5 3 1 1 Collector current IC (A) 0 0 0 0.3 0.1 0.03 0.1 0.3 1 3 10 6 4 Ta = 100°C 2 −25 25 Collector current IC (A) 0 0 0.4 1.2 0.8 Base-emitter voltage VBE (V) Safe Operating Area 30 10 IC max (pulsed)* PC – Ta Collector power dissipation PC Collector current IC (W) (A) 3 0.8 0.4 0 0 10 ms* 5 1.2 IC max (continuous) 100 ms* 1 0.5 0.3 DC operation Ta = 25°C 0.1 0.05 0.03 40 120 80 Ambient temperature Ta *: Single nonrepetitive pulse Ta = 25°C 0.01 Curves must be derated linearly with increase in 0.005 temperature. 0.003 0.03 0.1 0.3 1 160 (°C) 3 Collector-emitter voltage 3 10 VCE 30 100 (V) 2004-07-07 2SC3671 RESTRICTIONS ON PRODUCT USE 030619EAA • The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 4 2004-07-07