TOSHIBA A1015

2SA1015(L)
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process)
2SA1015(L)
Audio Frequency Amplifier Applications
Low Noise Amplifier Applications
·
Unit: mm
High voltage and high current: VCEO = −50 V (min),
IC = −150 mA (max)
·
Excellent hFE linearity: hFE (2) = 80 (typ.) at VCE = −6 V, IC = −150 mA
·
: hFE (IC = −0.1 mA)/hFE (IC = −2 mA) = 0.95 (typ.)
Low noise: NF = 0.2dB (typ.) (f = 1 kHz)
·
Complementary to 2SC1815 (L)
Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
-50
V
Collector-emitter voltage
VCEO
-50
V
Emitter-base voltage
VEBO
-5
V
Collector current
IC
-150
mA
Base current
IB
-50
mA
Collector power dissipation
PC
400
mW
Junction temperature
Tj
125
Tstg
-55~125
Storage temperature range
JEDEC
TO-92
JEITA
SC-43
°C
TOSHIBA
2-5F1B
°C
Weight: 0.21 g (typ.)
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Collector cut-off current
ICBO
VCB = -50 V, IE = 0
¾
¾
-0.1
mA
Emitter cut-off current
IEBO
VEB = -5 V, IC = 0
¾
¾
-0.1
mA
VCE = -6 V, IC = -2 mA
70
¾
400
hFE (2)
VCE = -6 V, IC = -150 mA
25
80
¾
Collector-emitter saturation voltage
VCE (sat)
IC = -100 mA, IB = -10 mA
¾
-0.1
-0.3
V
Base-emitter saturation voltage
VBE (sat)
IC = -100 mA, IB = -10 mA
¾
¾
-1.1
V
VCE = -10 V, IC = -1 mA
80
¾
¾
MHz
hFE (1)
DC current gain
Transition frequency
(Note)
fT
Collector output capacitance
Cob
VCB = -10 V, IE = 0
f = 1 MHz
¾
4
7
pF
Base intrinsic resistance
rbb’
VCB = -10 V, IE = 1 mA
f = 30 MHz
¾
30
¾
W
NF (1)
VCE = -6 V, IC = -0.1 mA
f = 100 Hz, RG = 10 kW
¾
0.5
6
NF (2)
VCE = -6 V, IC = -0.1 mA
f = 1 kHz, RG = 10 kW
¾
Noise figure
Note: hFE (1) classification
dB
0.2
3
O: 70~140, Y: 120~240, GR: 200~400
1
2003-03-27
2SA1015(L)
2
2003-03-27
2SA1015(L)
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
3
2003-03-27