TOSHIBA TLP595G

TOSHIBA
PHOTO RELAY
TLP595G
Unit in mm
Telecommunication
Data Acquisition
Measurement Instrumentation
The Toshiba TLP595G consists of an aluminum gallium
arsenide infrared emitting diode optically coupled to a
photo-MOSFET in a six lead plastic DIP package. The
TLP595G is a bi-directional switch which can replace
mechanical relays in many applications.
•
•
•
•
•
•
Peak Off-State Voltage
: 400V (Min.)
On-State Current
: 150mA (Max.) (A Connection)
On-State Resistance
: 12Ω (Max.) (A Connection)
Isolation Voltage
: 2500Vrms (Min.)
UL Recognized
: UL1577, File No. E67349
Trigger LED Current (Ta = 25°C)
Supplementary Information
Page (s)
Lead Form Options
31-32
Tape and Reel
39-40
Pin Configuration (Top View)
Schematic
The information contained here is subject to change without notice.
The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic
equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types
of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
TOSHIBA CORPORATION
413
TLP595G
TRIGGER LED CURRENT (mA)
CLASSIFICATION (Note 1)
MARKING OF
CLASSIFICATION
@ION = 150mA
MIN.
MAX.
(IFT2)
–
2
T2
Standard
–
5
T2, Blank
Note 1:
Application type name for certification test, please use standard product type name, i.e., TLP595G (IFT2): TLP595G
Maximum Ratings (Ta = 25°C)
CHARACTERISTIC
Forward Current
RATING
UNIT
IF
30
mA
∆IF/°C
-0.3
mA/°C
Peak Forward Current (100µs pulse, 100pps)
IFP
1
A
Reverse Voltage
VR
5
V
Junction Temperature
Tj
125
°C
VOFF
400
V
Forward Current Derating (Ta ≥ 25°C)
LED
SYMBOL
Off-State Output Terminal Voltage
A Connection
On-State RMS Current
B Connection
150
ION
200
C Connection
DETECTOR
300
A Connection
On-State Current Derating (Ta ≥ 25°C)
B Connection
mA
-1.5
∆ION/°C
-2.0
C Connection
mA/°C
-3.0
tj
125
°C
Storage Temperature Range
Tstg
-55~100
°C
Operating Temperature Range
Topr
-20~85
°C
Lead Soldering Temperature (10s)
Tsol
260
°C
BVS
2500
Vrms
Junction Temperature
Isolation Voltage (AC, 1 min., R.H. ≤ 60%)
(Note 2)
Note 1:Device considered a two terminal device: pins 1, 2 and 3 shorted together, and pins 4, 5 and 8 shorted together.
414
TOSHIBA CORPORATION
TLP595G
Recommended Operating Conditions
CHARACTERISTIC
SYMBOL
MIN.
TYP.
MX.
UNIT
Supply Voltage
VD
–
–
320
V
Forward Current
IF
10
15
20
mA
On-State Current
ION
–
–
150
mA
Operating Temperature
Topr
-20
–
80
°C
Circuit Connections
Individual Electrical Characteristics (Ta = -25°C)
CHARACTERISTIC
LED
DETECTOR
SYMBOL
TEST CONDITION
MIN.
TYP.*
MX.
UNIT
1.2
1.4
1.7
V
Forward Voltage
VF
IF = 10mA
Reverse Current
IR
VR = 3V
–
–
10
µA
Capacitance
CT
V = 0, f = 1MHz
–
15
–
pF
Off-State Current
IOFF
VOFF = 400V
–
–
1
µA
Capacitance
COFF
V = 0, f = 1MHz
–
–
–
pF
Coupled Electrical Characteristics (Ta = 25°C)
CHARACTERISTIC
SYMBOL
IFT
Trigger LED Current
A Connection
On-State Resistance
B Connection
C Connection
TOSHIBA CORPORATION
RON
TEST CONDITION
MIN.
TYP.
MX.
UNIT
ION = 150mA
–
1
5
mA
ION = 150mA, IF = 10mA
–
8
12
ION = 200mA, IF = 10mA
–
4
6
ION = 300mA, IF = 10mA
–
2
3
Ω
415
TLP595G
Isolation Characteristics (Ta = 25°C)
CHARACTERISTIC
SYMBOL
Capacitance Input to Output
Isolation Resistance
TEST CONDITION
TYP.
MX.
UNIT
0.8
–
pF
10
–
Ω
CS
VS = 0, f = 1MHz
–
RS
VS = 500V, R.H. ≤ 60%
1010
AC, 1 minute
BVS
Isolation Voltage
MIN.
5x
14
2500
–
–
AC, 1 second in oil
–
5000
–
DC, 1 minute in oil
–
5000
–
Vdc
UNIT
Vrms
Switching Characteristics (Ta = 25°C)
CHARACTERISTIC
SYMBOL
TEST CONDITION
MIN.
TYP.
MX.
Turn-on Time
ton
–
0.3
1.0
Turn-off Time
toff
VDD = 20mA, RL = 200Ω
IF = 10mA
(Note 3)
–
0.2
1.0
ms
Figure 1. Switching Time Test Circuit
416
TOSHIBA CORPORATION
TLP595G
TOSHIBA CORPORATION
417
TLP595G
418
TOSHIBA CORPORATION
TLP595G
TOSHIBA CORPORATION
419
TLP595G
Notes
420
TOSHIBA CORPORATION