TLWWK1100B(T11) TOSHIBA LED Lamp TLWWK1100B(T11) Unit: mm Panel Circuit Indicator • Surface-mount devices • 3.2 (L) × 2.9 (W) × 1.9 (H) mm • LED chip + phosphor • Luminous intensity : Iv = 1500 mcd (typ.) @20mA • Color: Warm White, Color temperature 3500K(typ) • Topr / Tstg = -40 to 100°C • Applications: back-lighting for automotive use, • Standard embossed tape packing: T11 (2000 pcs / reel) general lighting, etc. 8-mm tape reel Color and Material Product Name TLWWK1100B Color Material Warm White InGaN Rating Unit IF 30 mA Power Dissipation PD 114 mW Operating Temperature Topr −40 to 100 °C Storage Temperature Tstg −40 to 100 °C (Note 1) JEITA ― 4-3V1 Weight: 0.035 g (typ.) Symbol Forward Current ― TOSHIBA Absolute Maximum Ratings (Ta = 25°C) Characteristics JEDEC Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). IF – Ta 35 30 Allowable forward current IF (mA) Note 1: Forward current derating 25 20 15 10 5 0 0 20 40 60 Ambient temperature 80 Ta 100 120 (°C) 2009-01-14 For part availability and ordering information please call Toll Free: 800.984.5337 Website: www.marktechopto.com | Email: [email protected] TLWWK1100B(T11) Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test condition Min. Typ. Max. Unit Forward Voltage VF IF = 20 mA 2.6 3.2 3.8 V Reverse Voltage VR IR = 1 mA ⎯ 0.75 ⎯ V Symbol Test condition Min. Typ. Max. Unit Cx IF = 20 mA (Note 2) ⎯ Cy IF = 20 mA (Note 2) ⎯ IV IF = 20 mA Optical Characteristics (Ta = 25°C) Characteristics Chromaticity Luminous Intensity (Note 3) 1000 1500 2500 mcd Note 2: The product is tested at the following chromaticity coordinate group. Test conditions: IF=20mA, Ta=25°C Accuracy: +/-0.01 0.46 Point 1 2 3 4 0.44 0.42 Cx 0.386 0.376 0.410 0.430 Cy 0.398 0.360 0.380 0.420 Black Body Curve 0.4 Cy 0.38 0.36 0.34 0.32 0.34 0.36 0.38 0.4 0.42 0.44 0.46 Cx 0.48 (CIE1931) Note 3: Iv rank classification Test conditions: IF=20mA, Ta=25°C Product name Luminous intensity IV min typ max TLWWK1100B(T11) 1000 1500 2500 WA1 1000 ⎯ 1600 WA2 1250 ⎯ 2000 XA1 1600 ⎯ 2500 Unit mcd IF 20 mA The specification on the above table is used for Iv classification of LEDs in Toshiba facility. Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned. 2 2009-01-14 TLWWK1100B(T11) Cautions • The product is sensitive to electrostatic and care must be fully taken when handling products. Particularly in the case that an over-voltage shall be applied, the overflowed energy may cause damage to or possibly result in destruction of the product. Buyer shall take absolutely secure countermeasures against electrostatic and surge when handling the product. • The product is designed as a general display light source usage, and it has applied the measurement standard that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional application (ex. Light source for sensor, optical communication and etc) except general display light source. 3 2009-01-14 TLWWK1100B(T11) TLWWK1100B IF – V F IV/IV(20 mA) – IF (typ.) (typ.) 3 100 (mA) Ta = 25°C Ta = 25°C 1 IV/IV(20 mA) Forward Current IF 30 10 0.3 0.1 3 0.03 1 2.6 2.8 3.0 3.2 3.4 Forward Voltage VF 3.6 0.01 1 3.8 3 5 10 30 Forward Current (V) Relative IV – Tc 50 100 300 500 IF (mA) Cx, Cy – IF (typ.) 1.6 (typ.) 0.44 Ta = 25°C Relative luminous Intensity IV 1.4 0.42 Chromaticity Cx, Cy 1.2 1 0.8 0.6 0.4 Cx 0.40 Cy 0.38 0.36 0.2 0 −20 0 20 40 60 Case Temperature Tc 80 0.34 0 100 (°C) 0° 10° 20° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 90° 80° 0 0.2 IF 40 0.4 0.6 0.8 50 (mA) Wavelength characteristic Relative luminous Intensity 10° 30 (typ.) 1.0 Ta = 25°C (typ.) 20° 20 Forward current Radiation pattern 30° 10 90° 1.0 0.8 0.6 0.4 0.2 0 300 400 500 Wavelength 4 600 700 800 λ (nm) 2009-01-14 TLWWK1100B(T11) Packaging This LED device is packed in an aluminum envelope with a silica gel and a moisture indicator to avoid moisture absorption. The optical characteristics of the device may be affected by exposure to moisture in the air before soldering and the device should therefore be stored under the following conditions: 1. This moisture proof bag may be stored unopened within 12 months at the following conditions. Temperature: 5°C to 30°C Humidity: 90% (max) 2. After opening the moisture proof bag, the device should be assembled within 168 hours in an environment of 5°C to 30°C/60% RH or below. 3. If upon opening, the moisture indicator card shows humidity 30% or above (Color of indication changes to pink) or the expiration date has passed, the device should be baked in taping with reel. After baking, use the baked device within 72 hours, but perform baking only once. Baking conditions: 60±5°C, for 24 to 48 hours. Expiration date: 12 months from sealing date, which is imprinted on the label affixed. 4. Repeated baking can cause the peeling strength of the taping to change, then leads to trouble in mounting. 5. If the packing material of laminate would be broken, the hermeticity would deteriorate. Therefore, do not throw or drop the packed devices. Mounting Method Soldering • Reflow soldering (example) Temperature profile for Pb soldering (example) Temperature profile for Pb-free soldering (example) 5 s max(*) 10 s max (*) (*) (*) 140 to 160°C max(*) (*) 4°C/s max 4°C/s max(*) max (*) 60 to 120 s Time • • • • • 260°C max Package surface temperature (°C) Package surface temperature (°C) 240°C max 4°C/s max(*) max(*) 150 to 180°C 230°C 4°C/s max(*) max(*) 60 to 120 s Time (s) 30 to 50s max(*) (s) The product is evaluated using above reflow soldering conditions. No additional test is performed exceed the condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under the above conditions. Please perform the first reflow soldering with reference to the above temperature profile and within 168 h of opening the package. Second reflow soldering In case of second reflow soldering should be performed within 168 h of the first reflow under the above conditions. Storage conditions before the second reflow soldering: 30°C, 60% RH (max) Make any necessary soldering corrections manually. (only once at each soldering point) Soldering iron : 25 W Temperature : 300°C or less Time : within 3 s Do not perform wave soldering. Recommended soldering pattern 1.65 1.15 Unit: mm 1.65 2.41 5 2009-01-14 TLWWK1100B(T11) Cleaning When cleaning is required after soldering, Toshiba recommends the following cleaning solvents. It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the recommended conditions). In selecting the one for your actual usage, please perform sufficient review on washing condition, using condition and etc. ASAHI CLEAN AK-225AES KAO CLEAN THROUGH 750H PINE ALPHA ST-100S : (made by ASAHI GLASS) : (made by KAO) : (made by ARAKAWA CHEMICAL) Precautions when Mounting (1) Do not apply force to the plastic part of the LED under high-temperature conditions. (2) To avoid damaging the LED plastic, do not apply friction using a hard material. (3) When installing the PCB in a product, ensure that the device does not come into contact with other cmponents. (4) Silicone is used for the encapsulated material of this LED. Therefore the top surface of this product is soft. Please do not pressure on encapsulated part of the LED to avoid affecting the reliability of the product. When using the automatic mounting devices, the pick and place nozzle that does not pressure on the silicone resin should be used. Tape Specifications 1. Product number format The type of package used for shipment is denoted by a symbol suffix after the product number. The method of classification is as below. (this method, however does not apply to products whose electrical characteristics differ from standard Toshiba specifications) (1) Tape Type: T11 (4-mm pitch) (2) Example TLWWK1100B (T11) Tape type Toshiba product No. 2. Handling precautions Tape material protected against static electricity. However, static electricity may occur depending on quantity of charged static electricity and a device may attach to a tape, or a device may be unstable when peeling a tape cover. (a) Since tape materials may accumulate an electrostatic charge, use an ionizer to neutralize the ambient air. (b) For transport and temporary storage of devices, use containers (boxes and bags) and jigs that are made of anti-static materials or of materials which dissipate electrostatic charge. 6 2009-01-14 TLWWK1100B(T11) 3. Tape dimensions Symbol Dimension Tolerance Symbol Dimension Tolerance D 1.5 +0.1/−0 P2 2.0 ±0.05 E 1.75 ±0.1 W 8.0 ±0.3 P0 4.0 ±0.1 P 4.0 ±0.1 t 0.3 ±0.05 A0 2.9 ±0.1 F 3.5 ±0.05 B0 3.7 ±0.1 D1 1.5 ±0.1 K0 2.3 ±0.1 P0 D K0 t P2 E F W B0 P D1 Polarity A0 7 2009-01-14 TLWWK1100B(T11) 4. Reel dimensions Unit: mm 9 +1/−0 φ60 2 ± 0.5 φ13 φ44 +0 180 −4 11.4 ± 1.0 5. Leader and trailer sections of tape 40 mm or more 40 mm or more (Note 1) (Note 2) Leading part: 190 mm (min) Note1: Empty trailer section Note2: Empty leader section 8 2009-01-14 TLWWK1100B(T11) 6. Packing form (1) Packing quantity Reel 2,000 pcs Carton 10,000 pcs (2) Packing form: Each reel is sealed in an aluminum pack with silica gel. 7. Label format (1) Label contents Shipped products are mentioned the following contents. P/N: TOSHIBA TYPE TLWWK1100B ADDC (T11) 1) xxxxxx 3) (xxxxx) Q’TY 2) xxxxxxxx 2,000 pcs 5)xxxx 4) xxx 6) E6SAG-0E0S6-07 7) Use under 5-30degC/60%RH within 168h SEALED xxxxxxxx DIFFUSED IN JAPAN ASSEMBLED IN JAPAN [[G]]/RoHS COMPATIBLE *Y380xxxxxxxxxxxxxxxxxx* Contents about Note section (Each example means the contents are different for each lot.) Information for Toshiba use Information for customers use 1) Lot code 4) Management code Example: 2707C2B Example: 2) Key code 715 32G 5) Packing quantity Example: 12345678 Example: 2000 pcs 3) Rank symbol 6) Product information Example: L1WA1 E6SAG-0E0S6-07 7) Storage condition after opening Use under 5-30 degC/60%RH within 168h (2) Label location • Reel • Carton Tape feel direction Label position Label position • The aluminum package in which the reel is supplied also has the label attached to center of one side. 9 2009-01-14 TLWWK1100B(T11) RESTRICTIONS ON PRODUCT USE • Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively “Product”) without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS. • Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 10 2009-01-14