TVR4J,TVR4N TOSHIBA Fast Recovery Diode Silicon Diffused Type TVR4J,TVR4N High Speed Rectifier Applications (fast recovery) · Unit: mm Repetitive Peak Reverse Voltage: VRRM = 600, 1000 V · Average Forward Current: IF (AV) = 1.2 A (Ta = 55°C) · Reverse Recovery Time: trr = 20 µs · Plastic Mold Type. Maximum Ratings (Ta = 25°C) Characteristics TVR4J Repetitive peak reverse voltage TVR4N Symbol VRRM Rating Unit 600 V 1000 Average forward current (Ta = 55°C ) IF (AV) 1.2 A Peak one cycle surge forward current (non repetitive) IFSM 100 (50 Hz) A Tj -40 to 150 °C JEDEC ― Tstg -40 to 150 °C JEITA ― Junction temperature Storage temperature range TOSHIBA Electrical Characteristics (Ta = 25°C) Characteristics 3-4B1A Weight: 0.47 g (typ.) Symbol Test Condition Min Typ. Max Unit Peak forward voltage VFM IFM = 5 A ¾ ¾ 1.2 V Repetitive peak reverse current IRRM VRRM = Rated ¾ ¾ 10 mA IF = 20 mA, IR = 1 mA ¾ ¾ 20 ms DC ¾ ¾ 80 °C/W Reverse recovery time Thermal resistance (junction to ambient) trr Rth (j-a) Note1: Soldering: 5 mm is the minimum to be kept between case and soldering part. Note2: Lead bending: 5 mm is the minimum to be kept from the case when bend the lead wire. Marking VR 4J Type Code Lot No. Month (starting from alphabet A) Year (last number of the christian era) Code Type VR4J TVR4J VR4N TVR4N Cathode Mark Color: Silver 1 2002-09-18 TVR4J,TVR4N iF – vF rth (j-a) – t 30 Transient thermal impedance rth (j-a) (°C /W) 10 5 Tj = 25°C 150 3 1 0.5 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Instantaneous forward voltage 1.6 vF 1.8 10 1 0.1 0.01 0.0001 2.0 0.001 0.01 1 10 100 Time t (s) (V) Surge forward current (non-repetitive) Ta max – IF (AV) 160 Maximum allowable temperature Ta max (°C) f = 50 Hz 80 60 40 20 140 3 5 10 30 Number of cycles 5 mm 120 ① ② 100 80 ① a ③ Solder land 60 ② a Solder land ④ 20 ´ 20 mm 40 ③ a Sine wave 30 ´ 30 mm 0 0 100 5 mm a 20 0 1 a ´ a: solder land Resistive and inductive load Tj = 25°C 5 mm (A) 100 Peak surge forward current IFSM 0.1 5 mm Instantaneous forward current iF (A) Ta = 25°C 100 Solder land 10 ´ 10 mm ④ Solder land less full lead 0.2 0.4 0.6 0.8 1.0 1.2 Average forward current 1.4 IF (AV) 1.6 1.8 2.0 (A) Ta max – IF (AV) 160 a ´ a: solder land 5 mm a 5 mm ① 120 5 mm Maximum allowable temperature Ta max (°C) Capacitive load 140 a 100 ② ③ 80 Sine wave ④ ① 60 ② 40 ③ 20 ④ 0 0 0.2 0.4 0.6 a a Solder land 30 ´ 30 mm Solder land 20 ´ 20 mm Solder land 10 ´ 10 mm Solder land less full lead 0.8 Average forward current IF (AV) (A) 2 2002-09-18 TVR4J,TVR4N RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 3 2002-09-18