NC7SVL32 TinyLogic® Low-ICCT Two-Input OR Gate Features Description 0.9V to 3.6V VCC Supply Operation Power-Off High-Impedance Inputs and Outputs Ultra-Small MicroPak™ Packages The NC7SVL32 is a single two-input OR gate with a Low-ICCT input design from Fairchild’s Ultra-Low Power ® (ULP-A) series of TinyLogic . The NC7SVL32 features very low quiescent current, even when the input voltage is lower than the VCC supply. This feature services mobile handset applications very well, allowing for direct interface with baseband processor general-purpose I/Os. Since mobile devices rely on a battery supply, the NC7SVL32 facilitates lower power consumption in mixed-voltage rail environments. 3.6V Over-Voltage Tolerant I/Os at VCC from 0.9V to 3.6V Proprietary Quiet Series™ Noise / EMI Reduction Circuitry Ultra-Low Dynamic Power This product is designed on an advanced CMOS technology for a wide low-voltage operating range (0.9V to 3.6V VCC), high drive needs (up to 24mA), and speed (maximum propagation delay of 3.5ns, VCC=3.3V). It achieves this performance while maintaining low CMOS power dissipation. Ordering Information Part Number Top Mark Eco Status Package Packing Method NC7SVL32P5X L32 RoHS 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3000 Units on Tape & Reel NC7SVL32L6X CF RoHS 6-Lead MicroPak™, 1.00mm Wide 5000 Units on Tape & Reel NC7SVL32FHX CF Green 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch 5000 Units on Tape & Reel For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. © 2008 Fairchild Semiconductor Corporation NC7SVL32 • Rev. 1.0.3 www.fairchildsemi.com NC7SVL32 — TinyLogic® Low-ICCT Two-Input OR Gate September 2009 IEEE/IEC A ≥1 B Figure 1. Y Logic Symbol Pin Configurations A 1 B 2 GND 3 5 4 Figure 2. VCC Y SC70 (Top View) A 1 6 VCC B 2 5 NC GND 3 4 Y Figure 3. MicroPak™ (Top Through View) NC7SVL32 — TinyLogic® Low-ICCT Two-Input OR Gate Connection Diagram Pin Definitions Pin # SC70 Pin # MicroPak Name 1 1 A Input 2 2 B Input 3 3 GND Ground 4 4 Y Output 5 NC No Connect 6 VCC Supply Voltage 5 Description Function Table Y = A+B Inputs A Output B Y L L L L H H H L H H H H H = HIGH Logic Level L = LOW Logic Level © 2008 Fairchild Semiconductor Corporation NC7SVL32 • Rev. 1.0.3 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC Supply Voltage -0.5 4.6 V VIN DC Input Voltage -0.5 4.6 V -0.5 VCC + 0.5 -0.5 4.6 VOUT IIK DC Input Diode Current IOK DC Output Diode Current IOH / IOL ICC or IGND TSTG HIGH or LOW State DC Output Voltage (1) VCC = 0V VIN < 0V -50 VOUT < 0V -50 VOUT > VCC +50 V mA mA DC Output Source/Sink Current ±50 mA DC VCC or Ground Current per Supply Pin ±50 mA +150 °C TJ Junction Temperature Under Bias +150 °C TL Junction Lead Temperature, Soldering 10 Seconds +260 °C PD Power Dissipation at +85°C ESD Storage Temperature Range -65 SC70-5 150 MicroPak-6 130 MicroPak2-6 120 Human Body Model, JEDEC:JESD22-A114 4000 Charge Device Model, JEDEC:JESD22-C101 2000 mW NC7SVL32 — TinyLogic® Low-ICCT Two-Input OR Gate Absolute Maximum Ratings V Note: 1. IO absolute maximum ratings must be observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter VCC Supply Voltage VIN Input Voltage VOUT IOH/IOL TA Δt/ΔV θJA Output Voltage Output Current in IOH/IOL Conditions Thermal Resistance Max. Unit 0.9 3.6 V V 0 3.6 VCC = 0V 0 3.6 HIGH or LOW State 0 VCC VCC = 3.0V to 3.6V ±24.0 VCC = 2.3V to 2.7V ±18.0 VCC = 1.65V to 1.95V ±6.0 VCC = 1.4V to 1.6V ±4.0 VCC = 1.1V to 1.3V ±2.0 VCC = 0.9V ±0.1 Operating Temperature, Free Air Minimum Input Edge Rate Min. -40 V mA +85 °C VIN = 0.8V to 2.0, VCC = 3.0V 10 ns/V SC70-5 425 MicroPak-6 500 MicroPak2-6 560 °C/W Note: 2. Unused inputs must be held HIGH or LOW. They may not float. © 2008 Fairchild Semiconductor Corporation NC7SVL32 • Rev. 1.0.3 www.fairchildsemi.com 3 Symbol VIH VIL Parameter HIGH Level Input Voltage LOW Level Input Voltage VCC Conditions TA=25°C Min. Min. .65 x VCC .65 x VCC 1.10 ≤ VCC ≤ 1.30 .65 x VCC .65 x VCC 1.40 ≤ VCC ≤ 1.60 .65 x VCC .65 x VCC 1.65 ≤ VCC ≤ 1.95 0.90 0.90 2.30 ≤ VCC ≤ 2.70 1.50 1.50 2.70 ≤ VCC ≤ 3.60 1.50 1.50 Max. 0.90 .25 x VCC .25 x VCC .25 x VCC .25 x VCC 1.40 ≤ VCC ≤ 1.60 .25 x VCC .25 x VCC 1.65 ≤ VCC ≤ 1.95 .25 x VCC .25 x VCC 2.30 ≤ VCC ≤ 2.70 0.70 0.80 0.80 VCC-0.10 VCC-0.10 1.10 ≤ VCC ≤ 1.30 VCC-0.10 VCC-0.10 1.40 ≤ VCC ≤ 1.60 VCC-0.20 VCC-0.20 VCC-0.20 VCC-0.20 2.30 ≤ VCC ≤ 2.70 VCC-0.20 VCC-0.20 2.70 ≤ VCC ≤ 3.60 VCC-0.20 VCC-0.20 1.10 ≤ VCC ≤ 1.30 IOH=-2mA .75 x VCC .75 x VCC 1.40 ≤ VCC ≤ 1.60 IOH=-4mA .75 x VCC .75 x VCC 1.25 1.25 2.00 2.00 1.80 1.80 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC ≤ 2.70 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 2.30 ≤ VCC ≤ 2.70 2.70 ≤ VCC ≤ 3.60 IOH=-6mA IOH=-12mA IOH=-18mA 2.70 ≤ VCC ≤ 3.60 IOH=-24mA 2.20 2.20 1.70 1.70 2.40 2.40 2.20 V 0.70 0.90 IOH=-100µA Units V 1.10 ≤ VCC ≤ 1.30 1.65 ≤ VCC ≤ 1.95 HIGH Level Output Voltage Max. 0.90 2.70 ≤ VCC ≤ 3.60 VOH TA=-40 to +85°C NC7SVL32 — TinyLogic® Low-ICCT Two-Input OR Gate DC Electrical Characteristics V 2.20 Continued on the following page… © 2008 Fairchild Semiconductor Corporation NC7SVL32 • Rev. 1.0.3 www.fairchildsemi.com 4 Symbol Parameter VCC LOW Level Output Voltage Min. 0.1 0.1 1.40 ≤ VCC ≤ 1.60 0.2 0.2 0.2 0.2 IOL=100µA ICC Quiescent Supply Current ICCT Increase in ICC per Input Units 2.30 ≤ VCC ≤ 2.70 0.2 0.2 2.70 ≤ VCC ≤ 3.60 0.2 0.2 1.10 ≤ VCC ≤ 1.30 IOL=2mA 0.25 x VCC 0.25 x VCC 1.40 ≤ VCC ≤ 1.60 IOL=4mA 0.25 x VCC 0.25 x VCC 1.65 ≤ VCC ≤ 1.95 IOL=6mA 0.30 0.3 2.30 ≤ VCC ≤ 2.70 0.40 0.40 0.40 0.40 0.60 0.60 0.40 0.40 0.55 0.55 0 ≤ VIN ≤ 3.60V ±0.1 ±0.5 µA 0 ≤ (VIN, VO) ≤ 3.60V 0.5 0.5 µA VIN=VCC, or GND 0.9 0.9 IOL=12mA IOL=18mA 2.70 ≤ VCC ≤ 3.60 IOL=24mA Power Off Leakage Current Max. 1.10 ≤ VCC ≤ 1.30 2.70 ≤ VCC ≤ 3.60 IOFF Min. 0.1 2.30 ≤ VCC ≤ 2.70 IIN Max. 0.1 2.70 ≤ VCC ≤ 3.60 Input Leakage Current TA=-40 to +85°C 0.90 1.65 ≤ VCC ≤ 1.95 VOL TA=25°C Conditions 0.90 to 3.60 0 0.90 to 3.60 VCC ≤ VIN ≤ 3.60V ±0.9 1.95 VIN = 0.9V 6 8 3.60 VIN = 1.5V 6 8 V NC7SVL32 — TinyLogic® Low-ICCT Two-Input OR Gate DC Electrical Characteristics (Continued) µA µA AC Electrical Characteristics Symbol Parameter Conditions 0.90 CL=15pF, RL=1MΩ 1.10 ≤ VCC ≤ 1.30 tPHL, tPLH Propagation Delay TA=25°C VCC 1.40 ≤ VCC ≤ 1.60 Min. CL=15pF, RL=2kΩ 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC ≤ 2.70 CL=30pF, RL=500Ω 2.70 ≤ VCC ≤ 3.60 CIN Input Capacitance 0 CPD Power Dissipation Capacitance 0.90 to 3.60 © 2008 Fairchild Semiconductor Corporation NC7SVL32 • Rev. 1.0.3 VIN=0V or VCC, f=10MHz Typ. TA=-40 to 85°C Max. Min. Max. 17.0 3.0 30.5 Units Figure 42.0 3.5 8.2 1.5 4.0 7.0 1.5 7.5 1.1 3.2 5.5 1.0 6.0 0.6 2.3 4.0 0.6 4.5 0.5 1.9 3.5 0.5 4.0 ns 3 pF 5 pF Figure 4 Figure 5 www.fairchildsemi.com 5 NC7SVL32 — TinyLogic® Low-ICCT Two-Input OR Gate AC Loadings and Waveforms Figure 4. AC Test Circuit Figure 5. AC Waveforms VCC Symbol 3.3V ± 0.3V 2.5V ± 0.2V 1.8V ± 0.15V 1.5V ± 0.1V 1.2V ± 0.1V 0.9V Vmi 1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 Vmo 1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 © 2008 Fairchild Semiconductor Corporation NC7SVL32 • Rev. 1.0.3 www.fairchildsemi.com 6 NC7SVL32 — TinyLogic® Low-ICCT Two-Input OR Gate Physical Dimensions Figure 6. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf. Package Designator P5X © 2008 Fairchild Semiconductor Corporation NC7SVL32 • Rev. 1.0.3 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 7 NC7SVL32 — TinyLogic® Low-ICCT Two-Input OR Gate Physical Dimensions 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.49) 5X 1.00 (0.75) (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C 1.0 DETAIL A 0.10 0.05 0.45 0.35 0.10 0.00 6X 0.25 0.15 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 0.5 (0.05) 6X DETAIL A PIN 1 TERMINAL 0.075 X 45 CHAMFER (0.13) 4X BOTTOM VIEW Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 MAC06AREVC Figure 7. 6-Lead, MicroPak™, 1.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf. Package Designator L6X © 2008 Fairchild Semiconductor Corporation NC7SVL32 • Rev. 1.0.3 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 8 NC7SVL32 — TinyLogic® Low-ICCT Two-Input OR Gate Physical Dimensions DETAIL A 5X Figure 8. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specifications Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf. Package Designator FHX © 2008 Fairchild Semiconductor Corporation NC7SVL32 • Rev. 1.0.3 Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.fairchildsemi.com 9 NC7SVL32 — TinyLogic® Low-ICCT Two-Input OR Gate © 2008 Fairchild Semiconductor Corporation NC7SVL32 • Rev. 1.0.3 www.fairchildsemi.com 10