TPS703(F),TPS704(F) TOSHIBA Photodiode Silicon Pin TPS703(F), TPS704(F) Lead(Pb)-Free Various Kinds Of Remote Control Systems Optical Communication • Unit in mm Detector for visible, fluorescent, and other disturbance light. TPS703(F): λ > 700nm TPS704(F): λ > 800nm • High sensitivity TPS703(F): ISC = 1.5μA (typ.) TPS704(F): ISC = 0.9μA (typ.) • High speed response: tr, tf = 100ns (typ.) • Wide half value angle: θ1/2 = ±65° (typ.) • TLN115A(F), etc. are available as high radiant power infrared LEDs. Absolute Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Reverse voltage VR 20 V Power dissipation PD 150 mW Power dissipation derating (Ta > 25°C) TPS703(F) Operating temperature range TPS703(F) Storage temperature range TPS703(F) TPS704(F) TPS704(F) TPS704(F) Soldering temperature･time ΔPD / °C Topr Tstg Tsol −2.31 −4.3 −30~80 −30~60 −40~90 −40~60 260°C･3s mW / °C TOSHIBA 0−7B1 Weight: 0.31 g (typ.) Pin Connection °C °C 1 2 1. Anode 2. Cathode ⎯ Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Product Indication c ・ Monthly production lot Production month (jan.-dec. are indicated by alphabets of A-L) Production year(last digit of A.D. is indicated) Model name TPS703(F) : 703 TPS704(F) : 704 Stamp color : Silver 1 2007-10-01 TPS703(F),TPS704(F) Opto−electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition 2 Short circuit current ISC E = 0.1mW / cm Dark current ID VR = 10V, E = 0 VOP E = 0.1mW / cm Open circuit voltage Capacitance CT Peak sensitivity wavelength λP Switching time Half value angle Rise time tr Fall time tf θ 2 (Note) (Note) Min. Typ. Max. TPS703(F) 0.9 1.5 ⎯ TPS704(F) 0.5 0.9 ⎯ ⎯ 1 30 TPS703(F) 150 250 ⎯ TPS704(F) 90 150 ⎯ ⎯ 20 ⎯ TPS703(F) ⎯ 960 ⎯ TPS704(F) ⎯ 1000 ⎯ ⎯ 100 ⎯ ⎯ 100 ⎯ ⎯ ±65 ⎯ VR = 3V, f = 1MHz ⎯ VR = 10V, RL = 1kΩ 1 2 Unit μA nA mV pF nm ns ° Note: Color temperature = 2870K , standard tungsten lamp. Precaution Please be careful of the followings. 1. Soldering shall be performed at a portion of lead above 2.3mm from the body of the device. 2. If the lead is formed, the lead should be formed at a distance of 2.3mm from the body of the device. Soldering shall be performed after lead forming. 2 2007-10-01 TPS703(F),TPS704(F) ID – V R 5 10 Ta = 25°C Dark current ID (nA) 3 Dark current ID (nA) ID – Ta (typ.) 1 10 10 10 3 (typ.) VR = 10V 2 The broken line only shows TPS703(F) characteristic. 1 0 0.5 0.3 0 4 8 12 Reverse voltage 16 VR IL– VR 1.6 10 20 -1 -20 (V) 0 20 40 60 80 100 Ambient temperature Ta (°C) Relative IL – Ta (typ.) 1.4 The broken line only shows TPS703(F) characteristic. TPS703(F) (typ.) VR = 10V Relative light current Light current IL (μA) 1.2 1.4 Ta = 25°C E = 0.1mW/cm2 1.2 TPS704(F) 1.0 0.8 1.0 0.6 0.8 0 5 10 Reverse voltage 15 VR ISC – E 0.4 -40 25 (V) 40 60 80 PD – Ta TPS703(F) TPS704(F) 10 5 3 0.3 20 160 50 1 0.1 0 (typ.) Ta = 25°C 30 -20 Ambient temperature Ta (°C) Allowable power dissipation PD (mW) Short circuit current ISC (μA) 100 20 1 3 10 120 TPS703(F) 80 40 0 0 30 2 Radiant incidence E (mW/cm ) TPS704(F) 20 40 60 80 100 Ambient temperature Ta (°C) 3 2007-10-01 TPS703(F),TPS704(F) CT – VR 20° 10° 0° 10° 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° Capacitance between terminals CT (pF) Directional Sensitivity Characteristic (typ.) (Ta = 25°C) Radiation angle (typ.) 100 Ta = 25°C 80 60 40 20 80° 80° 90° Relative sensitivity 0 0.4 0.2 0.6 0.8 90° 1.0 0 0.1 0.3 1 Reverse voltage Spectral Response 1.2 Ta = 25°C 3 VR 10 30 (V) (typ.) TPS703(F) TPS704(F) Relative sensitivity 1.0 0.8 0.6 0.4 0.2 0 600 700 800 900 1000 1100 1200 Wavelength λ (nm) 4 2007-10-01 TPS703(F),TPS704(F) RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2007-10-01