2SC2236 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) 2SC2236 Audio Power Amplifier Applications • Unit: mm Complementary to 2SA966 and 3-watt output applications. Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 30 V Collector-emitter voltage VCEO 30 V Emitter-base voltage VEBO 5 V Collector current IC 1.5 A Base current IB 0.15 A Collector power dissipation PC 900 mW Junction temperature Tj 150 °C Tstg −55 to 150 °C Storage temperature range Note: Using continuously under heavy loads (e.g. the application of high JEDEC TO-92MOD temperature/current/voltage and the significant change in JEITA ― temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. TOSHIBA 2-5J1A operating temperature/current/voltage, etc.) are within the Weight: 0.36 g (typ.) absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-09 2SC2236 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 30 V, IE = 0 ― ― 100 nA Emitter cut-off current IEBO VEB = 5 V, IC = 0 ― ― 100 nA Collector-emitter breakdown voltage V (BR) CEO IC = 10 mA, IB = 0 30 ― ― V Emitter-base breakdown voltage V (BR) EBO IE = 1 mA, IC = 0 5 ― ― V 100 ― 320 IC = 1.5 A, IB = 0.03 A ― ― 2.0 V hFE DC current gain (Note) Collector-emitter saturation voltage VCE (sat) VCE = 2 V, IC = 500 mA Base-emitter voltage VBE VCE = 2 V, IC = 500 mA ― ― 1.0 V Transition frequency fT VCE = 2 V, IC = 500 mA ― 120 ― MHz VCB = 10 V, IE = 0, f = 1 MHz ― ― 30 pF Collector output capacitance Cob Note: hFE classification O: 100 to 200, Y: 160 to 320 Marking C2236 Part No. (or abbreviation code) Lot No. Characteristics indicator A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-09 2SC2236 IC – VCE 10 (mA) 1400 Collector current IC hFE – IC 1000 Common emitter 8 DC current gain hFE 1600 Ta = 25°C 1200 6 1000 4 800 3 600 500 Ta = 100°C 300 25 100 −25 50 Common emitter 30 VCE = 2 V 10 1 10 3 2 30 300 100 Collector current IC 400 1000 3000 (mA) IB = 1 mA 200 0 0 0 2 4 6 8 10 12 Collector-emitter voltage 14 16 18 VCE (V) VCE (sat) – IC IC – VBE 1600 Common emitter 3 (mA) 1 0.5 0.3 0.1 Ta = −25°C 25 0.05 0.03 0.01 1 3 10 30 300 100 Collector current IC 1000 Common emitter 1400 IC/IB = 50 Collector current IC Collector-emitter saturation voltage VCE (sat) (V) 5 3000 VCE = 2 V 1200 1000 25 Ta = 100°C 800 −25 600 400 200 (mA) 0 0 0.2 0.4 0.6 0.8 1.0 Base-emitter voltage 1.2 1.4 1.6 1.8 VBE (V) Safe Operating Area 5 3 PC – Ta (A) Collector current IC 800 Collector power dissipation 600 400 10 ms* 1 ms* IC max (continuous) PC (mW) 1000 IC max (pulsed)* 100 ms* 1 1 s* 0.5 0.3 DC operation Ta = 25°C 0.1 *: Single nonrepetitive pulse 200 0.05 Ta = 25°C Curves must be derated linearly 0 0 20 40 60 80 100 120 140 with increase in temperature. 0.02 0.3 1 3 160 Collector-emitter voltage Ambient temperature Ta (°C) 3 VCEO max 10 30 VCE (V) 2006-11-09 2SC2236 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 4 2006-11-09