TOSHIBA 2SA1356_06

2SA1356
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process)
2SA1356
Audio Power Amplifier Applications
•
Unit: mm
Low saturation voltage: VCE (sat) = −0.32 V (typ.)
(IC = −500 mA, IB = −50 mA)
•
High collector power dissipation: PC = 1.2 W (Ta = 25°C)
•
Complementary to 2SC3419
Absolute Maximum Ratings (Tc = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
−40
V
Collector-emitter voltage
VCEO
−40
V
Emitter-base voltage
VEBO
−5
V
Collector current
IC
−800
mA
Base current
IB
−80
mA
Collector power
dissipation
Ta = 25°C
Tc = 25°C
Junction temperature
Storage temperature range
PC
1.2
5
W
Tj
150
°C
Tstg
−55 to 150
°C
JEDEC
―
JEITA
―
TOSHIBA
2-8H1A
Note: Using continuously under heavy loads (e.g. the application of high
Weight: 0.82 g (typ.)
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1
2006-11-09
2SA1356
Electrical Characteristics (Tc = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Collector cut-off current
ICBO
VCB = −40 V, IE = 0
―
―
−1.0
μA
Emitter cut-off current
IEBO
VEB = −5 V, IC = 0
―
―
−1.0
μA
V (BR) CEO
IC = −10 mA, IB = 0
−40
―
―
V
VCE = −2 V, IC = −50 mA
70
―
240
hFE (2)
VCE = −2 V, IC = −800 mA
13
50
―
VCE (sat)
IC = −500 mA, IB = −50 mA
―
−0.32
−0.8
V
Base-emitter voltage
VBE
VCE = −2 V, IC = −500 mA
―
―
−1.3
V
Transition frequency
fT
VCE = −2 V, IC = −0.5 A
50
100
―
MHz
VCB = −10 V, IE = 0, f = 1 MHz
―
20
―
pF
Collector-emitter breakdown voltage
hFE (1)
DC current gain
(Note)
Collector-emitter saturation voltage
Collector output capacitance
Cob
Note: hFE (1) classification O: 70 to 140, Y: 120 to 240
Marking
Lot No.
Characteristics indicator
A1356
Part No. (or abbreviation code)
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
2
2006-11-09
2SA1356
IC – VCE
−800
hFE – IC
1000
Common
emitter
Tc = 25°C
Common emitter
−20
VCE = −2 V
−12
500
−10
DC current gain hFE
Collector current IC
(mA)
−1000
−8
−600
−6
−4
−400
IB = −2 mA
Tc = 100°C
300
25
−25
100
50
30
−200
10
−3
0
0
0
−1
−2
−3
−4
Collector-emitter voltage
−5
−10
−30
Collector current IC
−6
VCE (sat) – IC
(mA)
IC – VBE
Common emitter
Common emitter
IC/IB = 10
(mA)
VCE = −2 V
Collector current IC
−0.3
−0.1
−0.05
Tc = 100°C
−0.03
−25
−0.01
−3
25
−10
−30
−100
Collector current IC
−300
−800
−600
−400
Tc = 100°C
25
−25
−200
−1000
0
0
(mA)
−0.2
−0.4
−0.6
−0.8
Base-emitter voltage
PC – Ta
−1.0
−1.2
VBE (V)
Safe Operating Area
8
−3000
(1) Tc = Ta Infinite heat sink
(2) No heat sink
IC max (pulsed)*
6
Collector current IC
(1)
4
2
(2)
40
80
120
160
1 ms*
10 ms*
(mA)
(W)
Collector power dissipation PC
−1000
−1000
−0.5
0
0
−300
VCE (V)
−1.0
Collector-emitter saturation voltage
VCE (sat) (V)
−100
−1000
−500
−300
Ambient temperature Ta (°C)
100 ms*
DC operation
Ta = 25°C
DC operation
Tc = 25°C
−100
−50
−20
−0.3
200
IC max (continuous)
*: Single nonrepetitive
pulse Tc = 25°C
Curves must be derated
linearly with increase in
temperature.
−1
−3
VCEO max
−10
−30
−100
Collector-emitter voltage VCE (V)
3
2006-11-09
2SA1356
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
4
2006-11-09