TOSHIBA SSM3J01F

SSM3J01F
TOSHIBA Field Effect Transistor Silicon P Channel MOS Type
SSM3J01F
High Speed Switching Applications
Unit: mm
·
Small package
·
Low on resistance : Ron = 0.4 Ω (max) (VGS = −4 V)
: Ron = 0.6 Ω (max) (VGS = −2.5 V)
·
Low gate threshold voltage
Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Drain-source voltage
VDS
-30
V
Gate-source voltage
VGSS
±10
V
DC
ID
-700
Pulse
IDP
-1400
Drain power dissipation (Ta = 25°C)
PD
200
mW
Channel temperature
Tch
150
°C
Storage temperature range
Tstg
-55~150
°C
Drain current
mA
JEDEC
TO-236MOD
JEITA
SC-59
TOSHIBA
2-3F1F
Weight: 0.012 g (typ.)
Marking
Equivalent Circuit
Handling Precaution
When handling individual devices (which are not yet mounting on a circuit board), be sure that the environment
is protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other
objects that come into direct contact with devices should be made of anti-static materials.
1
2003-03-27
SSM3J01F
Electrical Characteristics (Ta = 25°C)
Characteristics
Gate leakage current
Drain-source breakdown voltage
Drain cut-off current
Symbol
IGSS
V (BR) DSS
IDSS
Gate threshold voltage
Forward transfer admittance
Vth
ïYfsï
(Note)
Drain-source ON resistance
RDS (ON )
Test Condition
Min
Typ.
Max
Unit
¾
¾
±1
mA
-30
¾
¾
V
¾
¾
-1
mA
VDS = -3 V, ID = -0.1 mA
-0.6
¾
-1.1
V
VDS = -3 V, ID = -0.35 A
1.0
¾
¾
S
ID = -0.35 A, VGS = -4 V
¾
0.3
0.4
¾
0.4
0.6
VGS = ±10 V, VDS = 0
ID = -1 mA, VGS = 0
VDS = -30 V, VGS = 0
(Note) ID = -0.35 A, VGS = -2.5 V
W
Input capacitance
Ciss
VDS = -10 V, VGS = 0, f = 1 MHz
¾
240
¾
pF
Reverse transfer capacitance
Crss
VDS = -10 V, VGS = 0, f = 1 MHz
¾
24
¾
pF
Output capacitance
Coss
VDS = -10 V, VGS = 0, f = 1 MHz
¾
94
¾
pF
VDD = -15 V, ID = -0.3 A,
VGS = 0~-2.5 V, RG = 4.7 W
¾
36
¾
¾
37
¾
Turn-on time
ton
Turn-off time
toff
Switching time
ns
Note: Pulse test
Switching Time Test Circuit
Precaution
Vth can be expressed as voltage between gate and source when low operating current value is ID = -100 mA for
this product. For normal switching operation, VGS (ON) requires higher voltage than Vth and VGS (off) requires
lower voltage than Vth.
(Relationship can be established as follows: VGS (off) < Vth < VGS (ON))
Please take this into consideration for using the device.
VGS recommended voltage of -2.5 V or higher to turn on this product.
2
2003-03-27
SSM3J01F
3
2003-03-27
SSM3J01F
Figure 1
25.4 mm ´ 25.4 mm ´ 1.6 t (a Cu pad of 0.8 mm2 area)
4
2003-03-27
SSM3J01F
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
5
2003-03-27
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.