2SA1201 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process) 2SA1201 Voltage Amplifier Applications Power Amplifier Applications Unit: mm • High voltage: VCEO = −120 V • High transition frequency: fT = 120 MHz (typ.) • Small flat package • PC = 1 to 2 W (mounted on a ceramic substrate) • Complementary to 2SC2881 Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO −120 V Collector-emitter voltage VCEO −120 V Emitter-base voltage VEBO −5 V Collector current IC −800 mA Base current IB −160 mA PC 500 Collector power dissipation PC (Note 1) Junction temperature Storage temperature range 1000 PW-MINI JEDEC mW Tj 150 °C Tstg −55 to 150 °C ― JEITA SC-62 TOSHIBA 2-5K1A Weight: 0.05 g (typ.) Note 1: Mounted on a ceramic substrate (250 mm2 × 0.8 t) Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-09 2SA1201 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = −120 V, IE = 0 ― ― −0.1 μA Emitter cut-off current IEBO VEB = −5 V, IC = 0 ― ― −0.1 μA Collector-emitter breakdown voltage V (BR) CEO IC = −10 mA, IB = 0 −120 ― ― V Emitter-base breakdown voltage V (BR) EBO IE = −1 mA, IC = 0 −5 ― ― V VCE = −5 V, IC = −100 mA 80 ― 240 VCE (sat) IC = −500 mA, IB = −50 mA ― ― −1.0 V Base-emitter voltage VBE VCE = −5 V, IC = −500 mA ― ― −1.0 V Transition frequency fT VCE = −5 V, IC = −100 mA ― 120 ― MHz VCB = −10 V, IE = 0, f = 1 MHz ― ― 30 pF DC current gain Collector-emitter saturation voltage Collector output capacitance hFE (Note 3) Cob Note 3: hFE classification O: 80 to 160, Y: 120 to 240 Marking Part No. (or abbreviation code) D Lot No. Characteristics indicator A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-09 2SA1201 IC – VCE −10 hFE – IC 1000 −7 Common emitter Common emitter 500 Ta = 25°C −5 DC current gain hFE (mA) −800 −600 Collector current IC −4 −3 −400 −2 −200 VCE = −5 V 300 Ta = 100°C 25 −25 100 50 30 IB = −1 mA 10 −3 0 0 0 −4 −8 −12 Collector-emitter voltage −10 −30 Collector current IC −16 −1000 (mA) IC – VBE VCE (sat) – IC −0.8 Common emitter −0.3 Common emitter IC/IB = 10 (A) VCE = −5 V −0.1 Collector current IC Collector-emitter saturation voltage VCE (sat) (V) −300 VCE (V) −0.5 Ta = 100°C −0.05 25 −0.03 −0.01 −3 −100 −25 −10 −30 −300 −100 Collector current IC −1000 −0.6 Ta = 100°C −0.4 25 −25 −0.2 (mA) 0 0 −0.2 −0.4 −0.6 Base-emitter voltage −0.8 −1.2 −1.0 VBE (V) Safe Operating Area −3000 IC max (pulse)* −1000 IC max (continuous) 1 ms* 10 ms* PC – Ta 1.2 DC operation −100 PC (W) −300 100 ms* Ta = 25°C Collector power dissipation Collector current IC (mA) −500 −50 −30 −10 *: Single nonrepetitive pulse Ta = 25°C −5 Curves must be derated linearly −3 with increase in temperature. Tested without a substrate. −1 −0.3 −1 −3 −10 Collector-emitter voltage 1.0 (1) Mounted on a ceramic (1) substrate (250 mm2 × 0.8 t) (2) No heat sink 0.8 0.6 (2) 0.4 0.2 VCEO max −30 −100 0 0 −300 VCE (V) 20 40 60 80 100 120 140 160 Ambient temperature Ta (°C) 3 2006-11-09 2SA1201 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 4 2006-11-09