RN142V Diodes PIN diode RN142V zApplications High frequency switching zExternal dimensions (Unit : mm) zLand size figure (Unit : mm) 0.1±0.1 0.05 0.9MIN. 0.8MIN. 1.25±0.1 2.5±0.2 1.7±0.1 2.1 zFeatures 1) Small mold type. (UMD2) 2) Low high-frequency forward resistance / low capacitance (CT). UMD2 zConstruction Silicon epitaxial planar zStructure 0.7±0.2 0.1 0.3±0.05 ROHM : UMD2 JEDEC : S0D-323 JEITA : SC-90/A dot (year week factory) zTaping dimensions (Unit : mm) φ1.55±0.05 2.0±0.05 0.3±0.1 4.0±0.1 1.40±0.1 2.8±0.1 2.75 8.0±0.2 3.5±0.05 1.75±0.1 4.0±0.1 φ1.05 1.0±0.1 zAbsolute maximum ratings (Ta=25°C) Parameter Symbol VR Reverse voltage IF Reverse current Junction temperature Tj Storage temperature Tstg zElectrical characteristics (Ta=25°C) Parameter Symbol Forward voltage VF Reverse current IR Limits 60 100 150 -55 to +150 Capacitance between terminals Ct Min. - High frequeny switching Rf - Unit V mA ℃ ℃ Typ. - Max. 1 0.1 0.45 Unit V µA pF - 3 Ω Conditions IF=10mA VR=60V VR=1V , f=1MHz IF=3mA,f=100MHz 1/2 RN142V Diodes zElectrical characteristic curves (Ta=25°C) 100 1000 Ta=150℃ 100 Ta=125℃ 10 Ta=75℃ 1 Ta=25℃ 10 Ta=125℃ Ta=25℃ Ta=75℃ Ta=-25℃ 1 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 Ta=-25℃ 0.1 0.01 0.01 0 70 0 80 FORWARD VOLTAGE:VF(mV) f=100MHz 1 1 10 1 FORWARD CURRENT:IF(mA) rf-IF CHARACTERISTICS 830 820 810 7 6 5 4 AVE:0.4448nA 2 VF DISPERSION MAP 2 Ta=25℃ f=1MHz VR=1V n=10pcs 0.8 0.7 0.6 0 0 IR DISPERSION MAP 1.7 AVE:1.206Ω 1.4 0.3 0.1 1.8 1.5 0.4 1 Ta=25℃ f=100MHz IF=3mA n=10pcs 1.9 1.6 0.5 0.2 AVE:825.4mV 1000 FORWARD OPERATING RESISTANCE:rf(Ω) 8 3 10 100 FREQUENCY(MHz) Ct-f CHARACTERISTICS 0.9 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=25℃ VR=60V n=30pcs 9 Ta=25℃ IF=10mA n=30pcs 840 1 10 30 800 0.1 0.1 10 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 850 CAPACITANCE BETWEEN TERMINALS:Ct(pF) FORWARD OPERATING RESISTANCE:rf(Ω) f=10MHz 10 REVERSE CURRENT:IR(nA) 20 30 40 50 60 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS Ta=25℃ VR=0V 0.1 1.3 1.2 AVE:0.364pF 1.1 1 Ct DISPERSION MAP FORWARD CURRENT:IF(mA) rf DISPERSION MAP 5 Ta=25℃ f=100MHz IF=10mA n=10pcs 0.8 0.7 0.6 0.5 0.4 0.3 0.2 ELECTROSTATIC DISCHARGE TEST ESD(KV) 1 0.9 FORWARD OPERATING RESISTANCE:rf(Ω) 10 1 100 f=1MHz 1 0.1 FORWARD VOLTAGE：VF(V) VF-IF CHARACTERISTICS 0.1 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=150℃ 10 REVERSE CURRENT:IR(nA) FORWARD CURRENT:IF(mA) f=1MHz 4 AVE:2.01kV 3 2 AVE:0.71kV 1 AVE:0.639Ω 0 0 FORWARD CURRENT:IF(mA) rf DISPERSION MAP C=200pF R=0Ω C=100pF R=1.5kΩ ESD DISPERSION MAP 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1