TMP91CP27U 16-bit Low Cost General Purpose Microcontroller in 64-pin Package 16-bit single chip microcomputer TLCS-900/L1 Series Instruction mnemonics are upward-compatible with TLCS-90/900 16 Mbytes of linear address space General purpose registers and register banks 16-bit multiplication and division instructions Instruction execution time: 148 ns at 27 MHz External memory expansion Expandable up to 16 Mbytes Can simultaneously support 8/16-bit width external data bus Dynamic data bus sizing 34 interrupt sources 9 CPU interrupts: Software interrupt instructions 21 internal interrupts: 7 priority levels selectable 4 external interrupts: 7 priority levels selectable Input/Output ports: 53 pins max. 16-bit Timer/Counter: 1ch 8-bit Timer/Counter: 6ch Watchdog timer General purpose serial interface: 2ch UART/Synchronous mode: 2ch IrDA Ver. 1.0 (115.2 kbps) mode selectable: 1ch Serial bus interface: 1ch I2C bus mode/clock synchronous select mode 10-bit AD converter (built in sample-hold circuit) Analog input: 4ch Timer for real-time clock (RTC) Chip Select/Wait controller: 4ch Three standby modes Dual clock controller P-LQFP64-1010-0.50D Clock gear function: Max. clock speed (fc) to fc/16 Slow mode (fs = 32.768 kHz) Operating voltage : 1.8 V to 3.6 V at 10 MHz 2.7 V to 3.6 V at 27 MHz Product ROM RAM Package Flash MCU TMP91CP27U 48kB x 8-bit 4kB x 8-bit P-LQFP64-1010-0.50D TMP91FY27U Development Tool support: Language Tools ޓޓ Development Tools C Compiler & Assembler Set Debugger & Simulator SW96WN0-ZCC SW96NN0-ZCC Controller Emulation POD Package converter QFP adapter OTP/MCU mount adapter Pin protector BM1040R0A BM91CW12AF0A-M15 PN120065 PN210031 PN210033 PN210032 Sample System Configuration Test Tools The test tools include the debugger, the Real-Time emulation controller and the emulation POD. The debugger functions as a user interface, offering a unified debugging environment. Language Tools Software tools which generate object files such as Intel Hex files from source files written in C, C-like or assembly language: Build manager with user-friendly GUI ANSI C-compiler A wide variety of options for improving the efficiency of code and using RAM efficiently is provided. Accessories : Accessories : MCU probe Connects a target system designed for a QFP MCU to an emulation pod. The probe matches the dimensions of the QFP and incorporates a QFP adapter and a pin protector. QFP Adapter Adapter for a QFP microcontroller. Used when connecting the emulation pod to the target system. Solder the QFP adapter to the target system PC board. Pin protector The pin protector serves as a protective layer between the MCU PROBE and the QFP adapter to prevent the MCU PROBE's joint from losing its spring. The pin protector is an expendable supply because the electrical contacts degrade gradually as it is attached and detached. The maximum attach-detach cycles should be limited to 100 times. ©2003 Copyright and Published by Toshiba Electronics Europe GmbH. The information contained herein is subject to change without notice. http://www.toshiba-europe.com