S6992 TOSHIBA Thyristor Silicon Planar Type S6992 Condenser Discharge Control Applications Unit: mm · Critical rate of rise of ON-state current: di/dt = 750 A/µs · Repetitive surge ON-state current: ITRM = 500 A (tw = 2 µs) · Repetitive peak OFF-state voltage: VDRM = 800 V · Gate trigger current: IGT = 20 mA max. Maximum Ratings Characteristics Symbol Rating Unit Repetitive peak OFF-state voltage VDRM 800 V Repetitive peak surge ON-state current (Note) ITRM 500 A di/dt 750 A/ms PGM 5 W PG (AV) 0.5 W Peak forward gate voltage VFGM 10 V Peak reverse gate voltage VRGM -5 V Peak forward gate current IGM 2 A TOSHIBA Tj -40~125 °C Weight: 1.5 g (typ.) Tstg -40~150 °C Critical rate of rise of ON-state current (Note) Peak gate power dissipation Average gate power dissipation Junction temperature Storage temperature range JEDEC ― JEITA ― 13-10J1B Note: VD < = 0.8 ´ rated, Tc = 85°C, igp > = 40 mA, tgw > = 10 ms, tgr < = 150 ns Marking ※1 ※1 ※2 TYPE NAME S6992 Lot Number ※2 MARK S6992 Example Month (starting from alphabet A) Year last decimal digit of the current year 8A: January 1998 8B: February 1998 8L: December 1998 *: There is no reverse-blocking (reverse voltage) ability. 1 2002-01-23 S6992 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Repetitive peak OFF-state current IDRM VDRM = rated ¾ ¾ 10 mA Peak ON-state voltage VTM ITM = 25 A ¾ ¾ 1.5 V Gate trigger voltage VGT ¾ ¾ 1.0 V Gate trigger current IGT Gate non-trigger voltage VGD Critical rate of rise of OFF-state voltage dv/dt Holding current Thermal resistance VD = 6 V, RL = 10 W VD = rated, Tc = 125°C VDRM = rated, Tc = 125°C Exponential rise ¾ ¾ 20 mA 0.2 ¾ ¾ V ¾ 50 ¾ V/ms IH VD = 6 V, ITM = 1 A ¾ ¾ 40 mA Rth (j-a) Junction to ambient ¾ ¾ 70 °C/W Test Circuit Examples VD IP C 0.5 IP L S6992 R t tw ~ - p LC , IP ~ - tw = 2 ms di/dt = VD L/C 0.5 IP t 2 2002-01-23 S6992 IGT (Tc)/IGT (Tc = 25°C) – Tc VGT (Tc)/VGT (Tc = 25°C) – Tc (typical) 2.5 (typical) 2.0 VD = 6 V RL = 10 W VD = 6 V RL = 10 W VGT (Tc)/VGT (Tc = 25°C) IGT (Tc)/IGT (Tc = 25°C) 2.0 1.5 1.0 0.5 0.0 -60 -20 20 60 100 1.5 1.0 0.5 0.0 -60 140 60 100 Pulse trigger characteristics (typical) 2.0 140 (typical) 5 Resistance load VD = 6 V ITM = 1 A VD = 6 V RL = 10 W 4 1.5 Tc = 25°C Rectangular waveform iGT(tw)/IGT IH (Tc)/IH (Tc = 25°C) 20 Case temperature Tc (°C) Case temperature Tc (°C) IH (Tc)/IH (Tc = 25°C) – Tc -20 1.0 0.5 0.0 -60 3 iGT tw 2 1 -20 20 60 100 0 0.1 140 Case temperature Tc (°C) 1 10 Gate trigger pulse width 100 tw 1000 (ms) iT – vT Instantaneous ON-state current iT (A) 1000 100 10 Tj = 125°C 1 0.0 1.0 25°C 2.0 Instantaneous ON-state voltage 3.0 4.0 vT (V) 3 2002-01-23 S6992 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 4 2002-01-23